PSL12V020 LED Mobile Phone Bluetooth Controller
Product Information
Specifications
- Compliance: FCC Part 15
- Interference Handling: Must not cause harmful interference
- Radiation Exposure Limits: Complies with FCC limits
- Operating Distance: Minimum 20cm between radiator and body
Product Usage Instructions
YES/NO Functionality
Use the YES option for affirmative responses and the NO option
for negative responses.
Arrow to Arrow Alignment
Ensure that arrows are aligned when connecting components or
devices.
Wrong Way Alert
If the device is being used incorrectly, a wrong way alert will
be triggered. Follow the correct orientation.
Pointing at the Sensor
Direct the device towards the sensor for proper functionality
and accurate readings.
Device Removal
When not in use, safely remove the device from its current
location.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is
subject to certain conditions to prevent interference and maintain
safe operation. Any unauthorized modifications may void user
authority to operate the equipment. Maintain a minimum distance of
20cm between the device and your body to comply with radiation
exposure limits.
FAQ
Q: What should I do if I encounter interference issues?
A: Ensure that the device is operated within the specified
guidelines and away from potential sources of interference.
Q: How do I know if the device is functioning correctly?
A: Follow the provided instructions for alignment, orientation,
and sensor usage to ensure proper functionality.
YES
NO
Arrow to Arrow
Wrong way
Pointing at the sensor
Take out
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
Lyman PSL12V020 LED Mobile Phone Bluetooth Controller [pdf] User Manual 2BGB8-PSL12V020, 2BGB8PSL12V020, psl12v020, PSL12V020 LED Mobile Phone Bluetooth Controller, PSL12V020, LED Mobile Phone Bluetooth Controller, Mobile Phone Bluetooth Controller, Phone Bluetooth Controller, Bluetooth Controller, Controller |