1. Ievads
The XTOOL IP500 is a professional OBD2 diagnostic scan tool specifically designed for Toyota, Lexus, and Scion vehicles. It provides comprehensive full system diagnosis, bi-directional control, and various reset services, enabling users to accurately identify and resolve vehicle issues. This manual provides instructions for setting up, operating, and maintaining your IP500 device.
Image 1.1: The XTOOL IP500 OBD2 Scanner displaying its main interface with options for Auto Scan, Diagnosis, OBD II, Special Function, Updates, and More.
2. Iestatīšana un sākotnējā lietošana
- Izpakojiet ierīci: Carefully remove the XTOOL IP500 scanner, USB to Type-C main cable, VGA to OBD2-16 main cable, and quick guide from the packaging.
- Ieslēgšana: The device includes a built-in 3150mAh lithium-ion battery. Ensure it is sufficiently charged using the Type-C cable and a compatible charger (not included).
- Savienojuma izveide ar transportlīdzekli: Locate your vehicle's OBD2 port, typically under the dashboard on the driver's side. Connect the VGA to OBD2-16 main cable to the scanner and then to the vehicle's OBD2 port. Turn the vehicle's ignition to the ON position (engine off).
- Sākotnējā iestatīšana: Follow the on-screen prompts to configure language, time zone, and Wi-Fi connection. A stable Wi-Fi connection is essential for software updates.
- Programmatūras atjauninājumi: Connect to Wi-Fi and navigate to the "Updates" section on the main menu. Perform any available system and vehicle software updates to ensure optimal performance and the latest vehicle compatibility. The device supports lifetime free Wi-Fi updates.
3. Lietošanas instrukcijas
3.1 Full Systems Diagnosis
The XTOOL IP500 provides comprehensive diagnostic capabilities across all vehicle systems, including engine, transmission, ABS, airbags, and more. This allows for accurate identification of Diagnostic Trouble Codes (DTCs) and monitoring of system status.
- From the main menu, select "Diagnosis" or "Auto Scan".
- The tool will automatically identify the vehicle's VIN (if supported) or prompt for manual selection of vehicle make, model, and year.
- Initiate a full system scan. The device will communicate with all accessible Electronic Control Units (ECUs) to retrieve fault codes and live data.
- Review the diagnostic report, which will display detected DTCs and their descriptions.
Image 3.1: The XTOOL IP500 connected to a vehicle, illustrating its capability to perform full system diagnostics across various components like engine, airbag, ABS, and transmission.
3.2 Divvirzienu vadība (aktīvie testi)
Bi-directional control allows the scanner to send commands to vehicle systems and components to test their functionality directly. This feature is crucial for efficient troubleshooting and verifying repairs.
- After selecting the vehicle, navigate to "Diagnosis" and then "System Selection".
- Choose the specific system (e.g., Engine, ABS, Body) you wish to test.
- Look for "Active Test" or "Bi-Directional Control" options.
- Select the component to test (e.g., fuel pump, window motor, headlight). The scanner will send a command, and you can observe the component's response.
Image 3.2: The XTOOL IP500 performing bi-directional control, showing the ability to send commands and receive feedback from components such as windows, mirrors, injectors, and headlights.
3.3 Special Functions (Reset Services)
The IP500 offers 21 unique reset and service functions tailored for Toyota, Lexus, and Scion vehicles. These functions assist in maintenance and repair tasks.
- EPB atiestatīšana (elektroniskā stāvbremze)
- SAS atiestatīšana (stūres leņķa sensors)
- BMS atiestatīšana (akumulatora pārvaldības sistēma)
- Droseles atiestatīšana
- ABS asiņošana
- Inžektora kodēšana
- Ātrumkārbas Match
- Balstiekārtas regulēšana
- Priekšējo lukturu regulēšana
- A/F atiestatīšana (gaisa/degvielas attiecība)
- A/C Relearn (Air Conditioning)
- Clutch Adaption
- Jaudas līdzsvars
- Kloķvārpstas sensora atkārtota apguve
Note: Access these services via "Diagnose > Brand > System Selection > Special Function". Availability of specific functions may vary by vehicle model and year. Consult the device's internal database or XTOOL support for compatibility.
Image 3.3: The XTOOL IP500 interface showing icons for various reset services, including ABS Bleeding, BMS Reset, Throttle Matching, SAS Reset, EPB Reset, and Injector Coding.
3.4 Pilnas OBD2 funkcijas
The IP500 includes all standard OBD2 functions for basic engine and emissions-related diagnostics, compatible with all OBD2 compliant vehicles.
- Lasīt DTC: Retrieve current, pending, and permanent diagnostic trouble codes.
- Notīrīt DTC: Erase diagnostic trouble codes and turn off the Check Engine Light (MIL).
- Tiešraides dati: View real-time operational parameters of the vehicle.
- Iesaldēt rāmi: Uzņemiet transportlīdzekļa stāvokļa momentuzņēmumu brīdī, kad tika iestatīts kļūdas kods.
- I/M gatavība: Check the status of emission-related monitors.
- O2 sensora tests: Retrieve O2 sensor monitoring test results.
- Borta monitora pārbaude: Access results of on-board diagnostic monitoring tests for specific components/systems.
- Komponentu pārbaude: Initiate a leak test for the EVAP system.
- Transportlīdzekļa informācija: Retrieve vehicle identification number (VIN), calibration ID (CALID), and calibration verification number (CVN).
Image 3.4: The XTOOL IP500 showing its full OBD2 functions, including Vehicle Info, Read Codes, Clear Codes, Live Data, Freeze Frame, and O2 Monitor Test.
3.5 Daudzfunkcionāls tiešraides datu grafiks
The device can display multiple live data streams simultaneously in a graphical format, allowing for easy comparison and analysis of vehicle performance parameters. This helps in identifying intermittent issues and understanding system interactions.
- From the "Live Data" menu, select the parameters you wish to monitor.
- Choose the "Graph" display option to view selected data streams graphically.
- Analyze the trends and correlations between different parameters to diagnose issues.
Image 3.5: The XTOOL IP500 screen displaying a multi-in-one live data graph, showing real-time sensor readings and their trends over time for diagnostic analysis.
4. Apkope
4.1. Programmatūras atjauninājumi
The XTOOL IP500 offers lifetime free software updates via Wi-Fi. Regularly updating the device ensures access to the latest vehicle models, diagnostic functions, and performance enhancements.
- Pārliecinieties, vai ierīce ir savienota ar stabilu Wi-Fi tīklu.
- From the main menu, tap on "Updates".
- Select the available updates for system software and vehicle brands.
- Follow the on-screen instructions to download and install the updates. Do not power off the device during the update process.
4.2 Ierīces kopšana
- Turiet ierīci tīru un bez putekļiem un mitruma.
- Glabājiet ierīci vēsā, sausā vietā, kad tā netiek lietota.
- Izvairieties no ierīces nomešanas vai nepakļaušanas spēcīgam triecienam.
- Use only the provided cables or XTOOL-approved accessories.
5. Traucējummeklēšana
- Ierīce neieslēdzas: Ensure the battery is charged. Connect the device to the vehicle's OBD2 port; the vehicle's power should activate the scanner.
- Nav komunikācijas ar transportlīdzekli:
- Verify the OBD2 cable is securely connected to both the scanner and the vehicle's port.
- Pārliecinieties, vai transportlīdzekļa aizdedze ir ieslēgta (dzinējs izslēgts).
- Check if the vehicle is OBD2 compliant (most vehicles from 1996 onwards in the US).
- Try connecting to a different OBD2 compliant vehicle to rule out a scanner issue.
- Atjaunināšanas kļūme: Ensure a stable and strong Wi-Fi connection. Restart the device and attempt the update again. If issues persist, contact XTOOL technical support.
- Konkrēta funkcija nedarbojas: Some special functions are vehicle-specific. Verify compatibility for your exact vehicle model and year. Contact XTOOL support for assistance.
- Lēna veiktspēja: Ensure the device has sufficient storage. Clear cache or unnecessary files if available. Perform a system update.
6. Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Zīmols | XTOOL |
| Modelis | IP500 for Toyota/Lexus/Scion |
| Operētājsistēma | Linux |
| Procesors | 1.2 GHz divkodolu procesors |
| Displejs | 5.45-inch Touchscreen, 1440 * 720 Resolution |
| Iekšējā atmiņa | 32GB (supports up to 128GB external memory, not included) |
| Akumulators | 3150 mAh litija jonu akumulators (iekļauts) |
| Savienojamība | Type-C (for charging), Wi-Fi |
| Preces svars | 1.76 mārciņas |
| Iepakojuma izmēri | 9.69 x 6.14 x 3.43 collas |
| Atbalstītās valodas | English, French, Portuguese, Russian, Japanese, Korean, Italian, Arabic, Spanish, Polish, German, Finnish, Turkish, Vietnamese, Traditional Chinese |
7. Kas ir kastē
- 1x XTOOL IP500 for Toyota OBD2 Scanner
- 1x USB–C tipa galvenais kabelis
- 1x VGA uz OBD2-16 galveno kabeli
- 1x ātra rokasgrāmata
- 1x Package Listing
8. Saderība
The XTOOL IP500 scanner is specifically designed to support 99% of models for Toyota, Lexus, and Scion vehicles. For specific model compatibility, it is recommended to consult XTOOL technical support with your vehicle's model, year, and desired features.
Image 8.1: Illustration showing three cars, representing the supported brands: Toyota, Lexus, and Scion, indicating broad compatibility for the XTOOL IP500.
9. Garantija un atbalsts
XTOOL provides lifetime free software updates for the IP500 scanner. For technical assistance, compatibility inquiries, or troubleshooting, please contact XTOOL technical support. You can reach them via email at xtoolinplusus@look.com.
