VINGLI Low Loft Bed with Stairs - Twin Size Instruction Manual

Svarīga drošības informācija

BRĪDINĀJUMS: Šo brīdinājumu un norādījumu neievērošana var izraisīt nopietnus savainojumus vai nāvi.

• Do not permit children under 6 years of age to use the upper bunk.
• The surface of the mattress must be at least 5 inches (12.7 cm) below the upper edge of the guardrails.
• Always use the recommended mattress size: Twin size.
• Periodiski pārbaudiet un pārliecinieties, vai visi savienotāji ir cieši pievilkti.
• Neļaujiet zirgiem spēlēties uz gultas vai zem tās.
• Neļaujiet augšējai gultai nakšņot vairāk nekā viena persona.
• Use the ladder for entering and exiting the bed.
• Nepievienojiet un nepiekariet nevienā divstāvu gultas daļā priekšmetus, kas nav paredzēti lietošanai kopā ar gultu; piemampāķi, jostas un lecamauklas, bet ne tikai.
• This bed is designed to support a maximum weight of 550 LBS.
• Assembly requires at least 2 adults.

Refer to the "Important Information" section in the product details for additional safety warnings.

Iepakojuma saturs

Before assembly, ensure all parts and hardware are present. Refer to the included parts list in your package. If any parts are missing or damaged, contact customer support.

Attēls: Sprādzienbīstams view of VINGLI Low Loft Bed components, showing all wooden parts and hardware required for assembly.

Montāžas instrukcijas

This VINGLI Low Loft Bed is designed for straightforward assembly. It is recommended that at least two adults participate in the assembly process. All necessary tools and hardware are included. Follow the steps carefully.

1. darbība: sagatavojiet zonu un identificējiet daļas

Clear a spacious area for assembly. Unpack all components and lay them out. Identify each part using the provided labels and the parts list. Ensure all hardware is accounted for.

2. solis: salieciet gultas rāmi

Begin by connecting the main frame components. Attach the side rails to the headboard and footboard using the provided bolts and Allen wrench. Do not overtighten until the entire frame is loosely assembled.

Image: Detail showing the sturdy frame construction with metal hinge connections for enhanced safety and durability.

Step 3: Install the Wood Slat Support System

Once the main frame is stable, install the 100% solid wood slats across the bed frame. These slats provide robust support for your mattress and eliminate the need for a box spring. Ensure the non-woven strip is correctly positioned to reduce noise.

Image: Close-up illustrating the sturdy wood slats, the noise-free non-woven strip, and protective leg pads.

Step 4: Attach the Guardrails and Ladder

Secure the full-length guardrails to the bed frame. These are crucial for safety, especially for the upper sleeping area. Attach the inclined ladder to the designated points on the bed frame. Ensure all connections are firm and stable.

Image: The 14-inch high full-length guardrail providing safety for the sleeping area of the low loft bed.

5. darbība: galīgā pievilkšana un pārbaude

Once all components are in place, go back and fully tighten all bolts and screws. Do not overtighten to avoid stripping. Perform a final inspection to ensure the bed is stable, all parts are correctly installed, and there are no loose connections.

Lietošanas vadlīnijas

The VINGLI Low Loft Bed is designed to maximize space in smaller rooms, providing a comfortable sleeping area above and versatile space below.

• Vieta zem gultas: The 33-inch height from bed slat to floor offers ample room for a play area, reading nook, or additional storage.
• Matrača ieteikums: A mattress with a 6-inch thickness is recommended for optimal safety and comfort.
• Svara ietilpība: The bed is constructed to support up to 550 LBS. Adhere to this limit to ensure structural integrity and safety.
• Low Ceiling Design: This low loft bed is ideal for rooms with lower ceilings or for younger users transitioning from a traditional bed.

Image: The versatile under-bed area of the VINGLI Low Loft Bed, suitable for various activities or storage solutions.

Image: A visual comparison highlighting the lower profile of the VINGLI Low Loft Bed, making it suitable for rooms with low ceilings.

Apkope

• Tīrīšana: Noslaukiet gultas rāmi ar reklāmuamp drānu un maigām ziepēm. Izvairieties no spēcīgām ķīmiskām vielām, kas var sabojāt koka apdari.
• Aparatūras pārbaude: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Retighten as necessary to maintain stability and safety.
• Koka kopšana: The bed is made of 100% pine wood. Avoid prolonged exposure to direct sunlight or extreme humidity to prevent warping or cracking.
• Grīdas aizsardzība: The legs are equipped with pads to protect your floor from scratches. Ensure these pads remain intact.

Problēmu novēršana

Produkta specifikācijas

• Zīmols: VINGLI
• Modelis: Low Twin Loft Bed with Stairs
• ASIN: B0CV7MSCBD
• Izmērs: Low Twin
• Produkta izmēri (G x P x A): 78.98 cm x 40.55 cm x 47.24 cm
• Guardrail Height: 13.97"
• Ground to Item Distance (Under-Bed Clearance): 33 collas
• Svara ierobežojums: 550 mārciņas
• Materiāls: 100% Pine Wood
• Apdares tips: Krāsots (balts)
• Īpaša iezīme: Inclined Ladder
• Nepieciešama montāža: Yes (Recommended 2 adults)
• Ieteicamais matrača biezums: 6 collas

Image: Dimensional diagram of the VINGLI Low Loft Bed, illustrating length, width, height, and under-bed clearance.

Garantija un atbalsts

VINGLI provides a 3-Year Quality Warranty for this product. For any questions, missing parts, or support needs, please contact VINGLI customer service directly. Please have your purchase receipt and product model information (ASIN: B0CV7MSCBD) ready when contacting support.

Kontaktinformācija: Refer to your purchase documentation or the VINGLI official webvietne, lai iegūtu jaunāko klientu atbalsta kontaktinformāciju.