VINGLI Elizabeth Cast Aluminum Patio Dining Chairs - Instruction Manual

1. Produkts beidziesview

The VINGLI Elizabeth Cast Aluminum Dining Chair is a stylish and durable seating option designed for both indoor and outdoor use. Crafted from high-quality cast aluminum, this chair combines elegance with strength. Its sleek design and comfortable seat make it suitable for various settings, from dining areas to poolside, backyard, or balcony use.

Galvenās funkcijas:

• All-weather resistant aluminum construction.
• Antique bronze finish with elegant Elizabeth pattern.
• Ergonomic design with curved armrests and comfortable seating.
• Lightweight and stackable for easy storage.
• Includes cushions for enhanced comfort.

Image 1: A set of VINGLI Elizabeth Cast Aluminum Patio Dining Chairs with cushions, arranged around a dining table on an outdoor patio.

2. Svarīga drošības informācija

Pirms montāžas un lietošanas, lūdzu, izlasiet un izprotiet visus norādījumus. Šo norādījumu neievērošana var izraisīt traumas vai produkta bojājumus.

• Ensure stable placement on even surfaces to prevent tipping.
• The maximum weight capacity for each chair is 330 lbs (150 kg). Do not exceed this limit.
• Follow assembly instructions carefully for safe and secure use.
• Sargājiet visas mazās detaļas un iepakojuma materiālus no bērniem.
• Periodiski pārbaudiet visas skrūves un bultskrūves, lai pārliecinātos, ka tās ir stingri pievilktas.

3. Iepakojuma saturs

Pirms montāžas sākšanas pārbaudiet, vai visas tālāk uzskaitītās detaļas ir komplektā un nav bojātas. Ja kādas detaļas trūkst vai ir bojātas, lūdzu, sazinieties ar klientu atbalsta dienestu.

• Chair Backrest (Elizabeth pattern)
• Krēsla sēdeklis
• Chair Legs (4 per chair)
• Armrests (2 per chair)
• Cushions (1 per chair)
• Montāžas furnitūra (skrūves, paplāksnes, sešstūra uzgriežņu atslēga)

4. Uzstādīšana un montāža

Assembly is straightforward and typically takes about 20 minutes per chair. It is recommended to have two people for easier assembly. Do not fully tighten any screws until all components are loosely assembled.

Soli pa solim montāža:

1. Kāju piestiprināšana pie sēdekļa: Carefully align each leg with the corresponding attachment points on the underside of the chair seat. Insert the provided screws and washers, tightening them partially (approximately 80%) to allow for adjustment.
2. Atzveltnes piestiprināšana: Position the backrest between the rear legs and align the screw holes. Secure with screws and washers, tightening partially.
3. Roku balstu piestiprināšana: Connect the armrests to the front legs and the backrest. Ensure proper alignment and secure with screws and washers, tightening partially.
4. Galīgā pievilkšana: Once all components are in place and aligned, fully tighten all screws to 100%. Ensure the chair is stable and level.
5. Pievienot spilvenus: Place the provided cushions on the chair seat.

Image 2: This diagram illustrates the chair's dimensions: 36.4 inches height, 25.6 inches width, 25.4 inches depth, with a seat height of 15.5 inches. It also indicates a weight capacity of 330 lbs and a chair weight of 32 lbs.

Image 3: The VINGLI Elizabeth Cast Aluminum Patio Dining Chairs are designed to be stackable, allowing for convenient storage when not in use, optimizing space on your patio or balcony.

4. attēls: Detalizēts view of the chair's features, including the elegant tulip pattern on the backrest, ergonomically curved armrests, a comfortable removable cushion, and adjustable foot levelers for stability on uneven surfaces.

5. Lietošanas vadlīnijas

These chairs are designed for both indoor and outdoor use, offering versatility for various environments.

• Ieteicamie lietojumi: Ideal for dining, relaxing, and general seating in patio, garden, balcony, or indoor dining areas.
• Izvietojums: Place on a flat, stable surface. Use the adjustable foot levelers to compensate for uneven ground.
• Kustība: When moving chairs, lift them rather than dragging to prevent damage to the chair or floor surface.

6. Kopšana un uzturēšana

Proper care will extend the life and appearance of your VINGLI patio chairs.

• Tīrīšana: Wipe down the aluminum frame with a soft cloth and mild soap and water. Rinse thoroughly and dry completely to prevent water spots.
• Spilvenu kopšana: The cushions are removable. Spot clean with a mild detergent and water. Allow to air dry completely. Store cushions indoors during inclement weather or when not in use for extended periods.
• Rūsas novēršana: The cast aluminum material is naturally rust-resistant. However, regular cleaning and ensuring the chairs are dry after rain can further protect the finish.
• Uzglabāšana: When not in use, especially during off-seasons, store chairs in a dry, covered area. The stackable design facilitates compact storage.

7. Traucējummeklēšana

If you encounter any issues with your chairs, refer to the following common solutions:

• Šūpojošs krēsls: Check all assembly screws to ensure they are fully tightened. Adjust the foot levelers on the bottom of the chair legs to stabilize it on uneven surfaces.
• Salikšanas grūtības: Ensure you are following the assembly directions exactly. Do not fully tighten screws until all parts are loosely connected. If screw holes do not align, loosen adjacent screws to allow for slight adjustment.
• Trūkstošās daļas: If any parts are missing from your package, please contact VINGLI customer support for assistance.

8. Produkta specifikācijas

9. Garantija un klientu atbalsts

VINGLI products are manufactured to high-quality standards and are backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation included with your purchase or visit the official VINGLI webvietne.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VINGLI customer support through the retailer where the product was purchased or via the contact information provided on the VINGLI brand store page.

Lai iegūtu papildinformāciju, apmeklējiet VINGLI Store on Amazon.