1. Svarīgi drošības norādījumi
Please read all instructions carefully before operating the VEVOR Sausage Stuffer. Retain this manual for future reference.
- Always ensure the stuffer is securely clamppirms lietošanas novietojiet uz stabilas virsmas.
- Keep hands and fingers away from moving parts, especially the plunger and stuffing tube opening, during operation.
- Use only food-grade ingredients and casings.
- Clean all parts thoroughly before first use and after each subsequent use.
- Do not attempt to modify the appliance. Use only manufacturer-approved accessories.
- Uzglabāt bērniem nepieejamā vietā.
2. Produkts beidziesview
The VEVOR Sausage Stuffer is designed for efficient and hygienic sausage making. It features a durable stainless steel construction and a user-friendly manual operation.
Galvenās sastāvdaļas:
- Stainless Steel Cylinder: Holds up to 1.5 liters (2.5 lbs) of meat mixture.
- Plunger with Air Release Valve: Ensures smooth stuffing and prevents air pockets.
- Kloķa rokturis: Provides manual control over the stuffing process.
- Cl tabulaamp Bāze: Secures the stuffer to a countertop.
- Stuffing Tubes: Three different sizes for various sausage types.
Image: Food-grade 304 Stainless Steel construction of the stuffer cylinder.
Image: The three included stuffing tubes with diameters of 16mm, 19mm, and 22mm.
3. Iestatīšana
Follow these steps to set up your sausage stuffer for use.
- Pievienojiet rokturi: Secure the crank handle to the main shaft using the provided screw.
- Secure to a Surface: Place the stuffer on a stable countertop. Use the clamp screw base to firmly attach the unit to the edge of the table. Ensure the table thickness does not exceed 7cm (2.75 inches).
- Select Stuffing Tube: Choose the appropriate stuffing tube (16mm, 19mm, or 22mm) for your desired sausage size and attach it to the outlet.
Image: The stuffer secured to a table using its clamp screw base, illustrating the maximum table thickness.
Setup Video Tutorial:
Video: An official VEVOR video demonstrating the installation and setup process of the sausage stuffer.
4. Lietošanas instrukcijas
Prepare your meat mixture and casings before beginning the stuffing process.
- Gaļas sagatavošana: Ensure your meat mixture is well-chilled and properly seasoned.
- Ielādēt gaļu: Pull the plunger all the way up. Carefully spoon the meat mixture into the stainless steel cylinder, ensuring no large air pockets are trapped.
- Pievienojiet C.asing: Slide the prepared casing onto the chosen stuffing tube, gathering it tightly at the end. Tie a knot at the end of the casing.
- Begin Stuffing: Slowly turn the crank handle clockwise to push the plunger down. The meat will be extruded into the casing. Vadiet casing off the tube as it fills, ensuring even filling and avoiding air bubbles. The air release valve on the plunger will help expel excess air.
- Form Sausages: Reiz casing is filled, twist or tie the sausage at desired intervals to create individual links.
Image: Loading meat mixture into the stuffer cylinder.
Image: Illustration of the air release valve mechanism, which helps prevent air bubbles in sausages.
Operation Video Tutorial:
Video: An official VEVOR video demonstrating the use and operation of the sausage stuffer, including filling and forming sausages.
5. Apkope un tīrīšana
Proper cleaning and maintenance will extend the life of your sausage stuffer.
- Izjaukšana: After each use, disassemble the stuffer by removing the handle, plunger, cylinder, and stuffing tube.
- Mazgāšana: Wash all components with warm, soapy water. Use a brush to clean any meat residue from the cylinder and tubes. The food-grade materials are fully washable.
- Skalošana: Rinse all parts thoroughly with clean water to remove soap residue.
- Žāvēšana: Dry all components completely before reassembly or storage to prevent water spots or corrosion.
- Uzglabāšana: Store the clean, dry stuffer in a cool, dry place.
Image: The detachable design of the stuffer makes cleaning easy under running water.
6. Traucējummeklēšana
Ja rodas problēmas, skatiet tālāk norādītās bieži sastopamās problēmas un risinājumus.
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Meat not extruding or slow extrusion | Meat mixture too thick; air trapped in cylinder; casing too tight. | Add a small amount of liquid (water or broth) to the meat mixture; ensure plunger is fully lowered to expel air; loosen casing slightly. |
| Air bubbles in sausages | Air trapped in meat mixture or cylinder; plunger not fully engaged. | Ensure meat is packed tightly without air pockets; check that the air release valve is functioning; press plunger slowly and steadily. |
| Stuffer is unstable on countertop | Clamp not tightened sufficiently; surface too thin or uneven. | Pievelciet klamp screw firmly; ensure the countertop is within the maximum thickness limit (7cm) and is stable. |
| Meat leaking from cylinder bottom | Seal not properly seated or damaged. | Check the bottom seal for proper placement and ensure it is not damaged. Replace if necessary. |
7. Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa numurs | Desu pildījums |
| Jauda | 1.5 Liters (approx. 2.5 lbs / 1.13 kg) |
| Materiāls | 304 Stainless Steel (Barrel), Food-grade PP (Discharge Tube & Pressure Plate) |
| Stuffing Tube Inner Diameters | 16 mm (0.63 collas), 19 mm (0.75 collas), 22 mm (0.87 collas) |
| Produkta izmēri | 6.7 x 6 x 16.3 collas (169 x 153 x 415 mm) |
| Preces svars | 6.6 mārciņas (2.85 kg) |
| Barošanas avots | Rokasgrāmata |
Image: Detailed dimensions of the VEVOR Sausage Stuffer and its included tubes.
8. Garantija un atbalsts
Lai saņemtu informāciju par garantiju un klientu atbalstu, lūdzu, skatiet produktam pievienoto dokumentāciju vai apmeklējiet oficiālo VEVOR vietni. webvietne. Saglabājiet pirkuma čeku kā pirkuma apliecinājumu.
