Solid State Logic SSL2 2 ieeju/2 izeju USB-C audio saskarnes lietotāja rokasgrāmata

1. Ievads

The Solid State Logic SSL2 is a high-performance 2-in/2-out USB-C audio interface designed for musicians, producers, and content creators. It features class-leading microphone preamps, 24-bit/192 kHz AKM converters, and a unique Legacy 4K analog enhancement mode inspired by classic SSL 4000 series consoles. This manual provides essential information for setting up, operating, and maintaining your SSL2 interface.

1. attēls. Priekšpuse view of the Solid State Logic SSL2 Audio Interface.

2. Iestatīšana

2.1 Sistēmas prasības

• Operating System: Windows 10 or higher (64-bit), macOS 10.15 (Catalina) or higher.
• USB 2.0 compatible port (USB-C for direct connection, USB-A with adapter).
• Internet connection for driver and software bundle download.

2.2 Draiveru un programmatūras instalēšana

1. Visit the Solid State Logic website (solidstatelogic.com/support) to download the latest drivers for your operating system.
2. Install the drivers by following the on-screen instructions.
3. Register your SSL2 to access the included SSL Production Pack software bundle, which typically includes DAWs, pluginsun samples.

2.3 Aparatūras savienojums

Connect the SSL2 to your computer using the supplied USB-C cable. The interface is bus-powered, meaning it draws power directly from your computer via the USB connection. Connect your microphones, instruments, and monitors as described below.

Figure 2: Rear panel connections of the Solid State Logic SSL2 Audio Interface.

3. Operating the SSL2

3.1 Priekšējā paneļa vadīklas

Figure 3: Close-up of SSL2 front panel controls.

• Input Channels 1 & 2: Each channel features an XLR/TRS combo jack for microphones or line-level instruments.
• +48V fantoma jauda: Aktivizē fantoma barošanu kondensatora mikrofoniem.
• Line/Inst Switch: Toggles between line-level and instrument-level input impedance.
• Pastiprinājuma pogas: Adjust the input gain for each channel. Monitor the input level using the LED meters.
• Legacy 4K Button: Engages the 4K analog enhancement, adding a subtle high-frequency boost and harmonic distortion inspired by classic SSL consoles.
• Monitora līmenis: Large central knob controls the overall output level to your studio monitors.
• Monitora maisījums: Blends the input signal with the USB playback from your computer for zero-latency monitoring.
• Austiņu līmenis: Dedicated knob for adjusting the headphone output volume.

3.2 Aizmugurējā paneļa savienojumi

• USB-C ports: Izveido savienojumu ar datoru datu un strāvas padeves nodrošināšanai.
• Kensingtonas slēdzene: Ierīces nostiprināšanai.
• Monitor Outputs (L/R): Balanced TRS outputs for connecting to studio monitors.
• 1. un 2. ieejas: XLR/TRS kombinētās ligzdas mikrofonu vai līnijas līmeņa instrumentu pievienošanai.

4. Funkcijas

• Class-Leading Mic Preamps: Two high-quality microphone preamps offering 130.5dB EIN and 62dB of gain for pristine audio capture.
• Pro-Studio Quality Components: Equipped with Neutrik connectors and Alps pots for durability and reliable performance.
• High Current Headphone Amp: Provides clear and powerful headphone monitoring.
• 24-bit / 192 kHz AKM Converters: Ensures high-fidelity audio conversion for recording and playback.
• Legacy 4K Analog Enhancement: Instantly adds a touch of classic SSL 4000 series console character to your recordings.
• SSL Production Pack: An exclusive software bundle included with your purchase, featuring various DAWs, pluginsun samples to kickstart your production.

Figure 4: The SSL Production Pack software bundle.

5. Specifikācijas

6. Apkope

• Tīrīšana: Use a soft, dry cloth to clean the exterior of the interface. Avoid liquid cleaners or abrasive materials.
• Uzglabāšana: Uzglabājiet ierīci vēsā, sausā vietā, pasargājot no tiešiem saules stariem un ekstremālām temperatūrām.
• Kabeļu vadība: Ensure all cables are securely connected and not under strain to prevent damage to ports or cables.
• Programmatūras atjauninājumi: Regularly check the Solid State Logic website for firmware and driver updates to ensure optimal performance and compatibility.

7. Traucējummeklēšana

• Nav strāvas/savienojuma: Ensure the USB-C cable is securely connected to both the SSL2 and your computer. Try a different USB-C port or cable.
• Nav skaņas:
  • Check monitor and headphone levels.
  • Verify the Monitor Mix knob is set correctly (between Input and USB).
  • Ensure the SSL2 is selected as the audio input/output device in your computer's sound settings and your DAW.
  • Confirm drivers are installed correctly.
• Izkropļota skaņa:
  • Reduce input gain to prevent clipping (red LEDs on the meter).
  • Pārbaudiet, vai nav bojātu kabeļu vai savienojumu.
  • Nodrošināt sample rates match between your DAW and the SSL2 settings.
• Fantoma barošana nedarbojas: Ensure the +48V button is engaged for the correct channel.

8. Garantija un atbalsts

The Solid State Logic SSL2 is covered by a manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Solid State Logic webvietni vai sazinieties tieši ar klientu atbalsta dienestu. Saglabājiet pirkuma apliecinājumu garantijas prasību iesniegšanai.