TEFAL BodyMaster BM6010V0 Digital Impedance Scale User Manual

1. Ievads

Thank you for choosing the TEFAL BodyMaster BM6010V0 Digital Impedance Scale. This scale is designed to help you monitor your weight and body composition, including fat mass, with precision and ease. Please read this manual carefully before first use to ensure proper operation and to get the most out of your device.

2. Drošības informācija

• Do not use this device if you have a pacemaker or other internal medical device. The bioelectrical impedance analysis (BIA) technology sends a small electrical current through your body, which may interfere with such devices.
• This scale is not intended for use by pregnant women or individuals with certain medical conditions. Consult your doctor if you have concerns.
• Always place the scale on a hard, flat surface for accurate readings. Soft surfaces like carpets can affect accuracy.
• Do not use the scale on wet or slippery surfaces to prevent falls.
• Sargājiet svarus no ūdens un ekstremālām temperatūrām.
• This scale is for personal use only and not for commercial or medical purposes.

3. Produkts beidziesview

The TEFAL BodyMaster BM6010V0 is a digital impedance scale featuring a large glass platform and an easy-to-read LCD display. It measures weight and body fat percentage using bioelectrical impedance analysis.

1. attēls: Augšdaļa view of the TEFAL BodyMaster BM6010V0 digital impedance scale, showing the display and electrode pads.

Galvenās funkcijas:

• Augsta kapacitāte: Izmēri līdz 160 kg (352 mārciņām).
• Precizitāte: 100 g (0.2 lb) graduation for accurate weight tracking.
• Ķermeņa sastāva analīze: Utilizes Bioelectrical Impedance Analysis (BIA) to estimate body fat mass.
• Lietotāja atmiņa: Stores data for up to 4 users with automatic recognition.
• Liels LCD displejs: 33mm digit height for clear readability.
• Automātiska ieslēgšana/izslēgšana: Convenient power management.

Image 2: Icon indicating the scale's maximum weight capacity of 160 kg.

Image 3: Icon indicating the scale's measurement graduation of 100 grams.

Image 4: Icon showing the scale's capability to store 4 user profiles.

Image 5: Graphic illustrating the 33mm height of the digits on the scale's LCD display for enhanced readability.

4. Iestatīšana

4.1 Akumulatora uzstādīšana

1. Atrodiet bateriju nodalījumu svaru apakšpusē.
2. Atveriet akumulatora nodalījuma vāku.
3. Insert the 4 AAA batteries (included) according to the polarity indicators (+/-) inside the compartment.
4. Droši aizveriet akumulatora nodalījuma vāku.

Image 6: Diagram showing the 4 AAA 1.5V batteries required for the scale.

4.2 Sākotnējā izvietošana

Place the scale on a firm, flat, and stable surface. Avoid placing it on carpets, rugs, or uneven floors, as this can affect measurement accuracy.

4.3 User Profile Setup (for Body Composition Analysis)

To utilize the body composition analysis features and automatic user recognition, you need to set up user profiles. The scale supports up to 4 user memories.

1. Press the 'SET' button (or similar button, refer to the scale's interface for exact labeling) to enter setup mode.
2. Use the '+' and '-' buttons to select a user number (P1, P2, P3, P4). Press 'SET' to confirm.
3. Set your gender (male/female). Press 'SET' to confirm.
4. Enter your age. Press 'SET' to confirm.
5. Enter your height. Press 'SET' to confirm.
6. Svari ietaupīs jūsu profesionālifile. Repeat for other users if necessary.

5. Lietošanas instrukcijas

5.1 Taking a Weight Measurement

1. Gently tap the center of the scale with your foot to turn it on. The display will show '0.0 kg' (or '0.0 lb' depending on unit setting).
2. Once '0.0 kg' is displayed, step onto the scale barefoot, placing your feet evenly on the electrode pads. Stand still.
3. Your weight will be displayed and flash a few times before settling.
4. Pēc dažām sekundēm skala automātiski izslēgsies.

Image 7: A person's bare feet positioned correctly on the scale's electrode pads for a measurement.

5.2 Taking a Body Composition Measurement

For body composition analysis, ensure your user profile is set up (Section 4.3) and you step on the scale barefoot.

1. Step onto the scale barefoot. The scale will first display your weight.
2. The scale will then automatically recognize you based on your weight and stored profile. Your user number (e.g., P1) will flash.
3. After recognition, the scale will perform the BIA analysis. Keep standing still.
4. The display will cycle through your measurements, typically showing weight, then body fat mass (in kg).

Image 8: The scale's display showing 'FAT MASS IN kg', indicating a body composition measurement result.

5.3. Mērvienību maiņa

The unit switch (kg/lb/st) is usually located on the underside of the scale, near the battery compartment. Use this switch to select your preferred unit of measurement.

6. Izpratne par mērījumiem

The TEFAL BodyMaster BM6010V0 uses Bioelectrical Impedance Analysis (BIA) to estimate your body composition. A small, safe electrical current is sent through your body. The resistance encountered, combined with your profile data (gender, age, height), allows the scale to calculate your lean mass. Your fat mass is then derived by subtracting your lean mass from your total body weight.

Factors such as hydration levels, recent food intake, and physical activity can influence BIA readings. For consistent results, measure yourself at the same time of day, under similar conditions (e.g., in the morning before breakfast and exercise).

7. Apkope un kopšana

• Clean the scale's surface with a damp drānu un maigu mazgāšanas līdzekli. Nelietojiet abrazīvus tīrīšanas līdzekļus un neiegremdējiet svarus ūdenī.
• Avoid dropping the scale or subjecting it to strong impacts, as this can damage the glass platform and internal components.
• Ja svari ilgstoši netiks lietoti, izņemiet baterijas, lai novērstu elektrolīta noplūdi.
• Uzglabājiet svarus vēsā, sausā vietā.

8. Traucējummeklēšana

• Displejā parādās ziņojums “Lo” vai “Err”: Indicates low battery. Replace all 4 AAA batteries.
• Neprecīzi rādījumi:
  • Pārliecinieties, ka svari atrodas uz cietas, līdzenas virsmas.
  • Step on the scale barefoot and stand still.
  • Ensure your feet are clean and dry, making good contact with the electrodes.
  • Recalibrate by stepping on and off the scale quickly, then waiting for '0.0 kg' before taking a measurement.
• Nav displeja: Check if batteries are correctly installed and not depleted.
• Body Composition Not Displayed: Ensure your user profile is set up correctly (gender, age, height) and you are stepping on the scale barefoot. The scale needs to recognize your profile to perform BIA.
• 'MAX' on Display: Indicates the maximum weight capacity (160 kg) has been exceeded.

9. Specifikācijas

10. Garantija un atbalsts

The TEFAL BodyMaster BM6010V0 Digital Impedance Scale comes with a 2 gadu garantija no iegādes datuma. Šī garantija attiecas uz ražošanas defektiem normālos lietošanas apstākļos.

Image 9: Icon indicating a 2-year product guarantee.

For warranty claims, technical support, or inquiries regarding spare parts, please contact Tefal customer service. Information on spare parts availability may vary by region.

Lūdzu, saglabājiet pirkuma apliecinājumu garantijas apstiprināšanai.