1. Ievads
This manual provides essential information for the safe and efficient operation of your InFocus IN116 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.
Iepakojuma saturs
Pārliecinieties, vai jūsu iepakojumā ir iekļauti visi tālāk norādītie priekšmeti:
- InFocus IN116 Projector
- Strāvas vads
- RGB kabelis
- A / V kabelis
- Drošības norādījumi
- Lietotāja rokasgrāmata (šis dokuments)
- Tālvadības pults
- HDMI kabelis
2. Produkts beidziesview
The InFocus IN116 is a portable DLP projector designed for various applications, offering a native WXGA (1280 x 800) resolution, 2700 ANSI lumens brightness, and a 3000:1 contrast ratio. It features 3D-ready capabilities and multiple input options for flexible connectivity.
Galvenās iezīmes
- WXGA (1280 x 800) Native Resolution
- 2700 ANSI lūmeni (2200 lūmeni ekonomiskajā režīmā)
- 3000: 1 kontrasta attiecība
- 3D-Ready functionality
- HDMI savienojums
- Ilgstoši lamp ilgstošai lietošanai
- Easy maintenance with no filters to replace
Projektora sastāvdaļas
1. attēls: Augšdaļa View. This image displays the top of the InFocus IN116 projector, highlighting the control panel with buttons for power, menu, source selection, and navigation. The lens is visible at the front.
2. attēls: Sāns View. This image shows the side of the InFocus IN116 projector, featuring prominent ventilation grilles for heat dissipation.
3. attēls: priekšpuse View. This image presents the front of the InFocus IN116 projector, with the lens actively emitting light, indicating its operational state.
4. attēls: aizmugurē View (Connectivity Panel). This image details the rear panel of the InFocus IN116 projector, displaying various input and output ports including HDMI, VGA (Computer In 1 & 2, Computer Out), S-Video, Composite Video, Audio In/Out, RS232C, and Mini USB.
3. Iestatīšanas instrukcijas
Izvietojums
Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. The projector can be placed on a table, ceiling-mounted, or used for rear projection.
Savienojuma izveide ar barošanas avotu
- Pievienojiet strāvas vadu projektora strāvas ieejai.
- Pievienojiet otru strāvas vada galu iezemētai elektrības kontaktligzdai.
Connecting Video Sources
The IN116 projector offers multiple input options:
- HDMI: Digitālajam video un audio signālam. Pievienojiet avota ierīci HDMI kabeli projektora HDMI portam.
- VGA (Computer In 1 & 2): For analog computer signals. Use a VGA cable to connect your computer to either VGA input.
- Salikts video: For standard definition video. Connect a composite video cable (yellow RCA) to the projector's Video input.
- S-Video: For enhanced standard definition video. Connect an S-Video cable to the projector's S-Video port.
For audio, connect an audio cable from your source to the projector's Audio In (3.5mm stereo) port if using VGA, Composite, or S-Video. HDMI carries both video and audio.
4. Lietošanas instrukcijas
Ieslēgšana/izslēgšana
- Lai ieslēgtu, nospiediet Jauda button on the projector's control panel or the remote control. The power indicator light will illuminate.
- Lai izslēgtu, nospiediet Jauda button twice. The projector will enter a cooling cycle before shutting down completely.
Ievades avota izvēle
Nospiediet pogu Avots button on the projector or remote control to cycle through available input sources (HDMI, VGA1, VGA2, Video, S-Video). The projector will automatically detect an active signal.
Attēla pielāgošana
- Fokuss: Grieziet projektora objektīva fokusēšanas gredzenu, līdz attēls ir ass un skaidrs.
- Tālummaiņa: Lai mainītu attēla izmēru, pielāgojiet projektora objektīva tālummaiņas gredzenu.
- Keystone korekcija: If the image appears trapezoidal, use the keystone correction function (usually found in the OSD menu or via dedicated buttons on the remote) to square the image.
- Attēlu režīmi: The projector offers various picture modes (e.g., Presentation, Bright, Movie, Eco Mode). Access these through the OSD menu to optimize image quality for different environments.
Eko režīms
Activate Eco Mode to extend lamp life and reduce power consumption. This mode is ideal for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode, compared to 5,000 hours in normal mode.
3D funkcionalitāte
The InFocus IN116 is 3D-ready and supports 3D content from compatible sources, including Blu-ray players. To view 3D content, you will need compatible 3D glasses and a 3D-enabled source device. Refer to your 3D source device's manual for specific setup instructions.
Video 1: InFocus IN110xv Series Overview. Šis video sniedz vispārīgu informācijuview of the InFocus IN110xv series projectors, which includes the IN116 model. It highlights features such as lamp life, resolution options (including WXGA for IN116), brightness, vivid color technology, and 3D readiness. This video is provided by InFocus Corporation.
5. Apkope
Lamp Aizstāšana
Projektors lamp ir ierobežots kalpošanas laiks. Kad lamp indicator light illuminates or the image brightness significantly decreases, it's time to replace the lamp. Lamp door is conveniently located on top of the projector for easy access, even when ceiling-mounted.
- Power off the projector and disconnect the power cord.
- Ļaujiet projektoram pilnībā atdzist (vismaz 30 minūtes).
- Locate and open the lamp door on the top of the projector.
- Uzmanīgi noņemiet veco lamp modulis.
- Uzstādiet jauno lamp module, ensuring it is securely seated.
- Aizveriet lamp door and reconnect the power cord.
- Atiestatiet lamp timer in the projector's OSD menu.
Uzmanību: Projektors lamps operate at high temperatures and pressures. Handle with care. In rare cases, lamps can explode. Always wear protective eyewear when replacing a lamp.
Tīrīšana
- Ārpuse: Izmantojiet mīkstu, damp cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents.
- Objektīvs: Use a lens cleaning cloth and lens cleaning solution specifically designed for optical surfaces. Avoid touching the lens with your fingers.
- Filtri: The InFocus IN116 projector is designed to operate without user-replaceable filters, simplifying maintenance.
6. Traucējummeklēšana
| Problēma | Iespējamais cēlonis | Risinājums |
|---|---|---|
| Nav parādīts neviens attēls |
|
|
| Attēls ir neskaidrs |
|
|
| Projektors pārkarst un izslēdzas |
|
|
| HDMI picture has a blue tint |
|
|
7. Specifikācijas
| Funkcija | Detaļas |
|---|---|
| Modeļa numurs | IN116 |
| Displeja tehnoloģija | DLP |
| Vietējā izšķirtspēja | WXGA (1280 x 800) |
| Spilgtums | 2700 ANSI Lumens (2200 lumens Eco Mode) |
| Kontrasta attiecība | 3000:1 |
| Lamp Life (Normal/Eco) | 5,000 stundas / 6,000 stundas |
| Savienojamības tehnoloģija | HDMI, VGA (x2), Composite Video, S-Video, Audio In (3.5mm), Audio Out (3.5mm), RS232C, USB B Mini |
| Īpaša iezīme | 3D gatavs |
| Produkta izmēri | 12.75 x 12.75 x 5.5 collas |
| Preces svars | 4.78 mārciņas (2.17 kg) |
| Ražotājs | Infocus |
| Datums pirmais pieejams | 1. gada 2011. maijs |
8. Garantija un atbalsts
Ierobežota garantija
All new DLP projectors from InFocus, including the IN116, are backed by a comprehensive limited warranty:
- Projektors: 5 gads ierobežota garantija
- Detaļas un darbs: 2 gada pilna garantija
- Lamp: 6 mēnešu garantija
For detailed terms and conditions of the warranty, please refer to the official InFocus webvietni vai sazinieties ar klientu atbalsta dienestu.
Klientu atbalsts
For technical assistance, troubleshooting, or warranty claims, please contact InFocus customer support. Visit the official InFocus webvietne, lai iegūtu kontaktinformāciju un papildu resursus.
Oficiālā Webvietne: www.infocus.com
