InFocus IN112 portatīvā DLP projektora lietotāja rokasgrāmata

1. Ievads

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Kas ir kastē

Pārliecinieties, vai jūsu produkta iepakojumā ir iekļauti visi tālāk norādītie priekšmeti:

• InFocus IN112 Projector
• Strāvas vads
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Drošības norādījumi
• Lietotāja rokasgrāmata (šis dokuments)
• Tālvadības pults

3. Projektors beidziesview

1. attēls: augšdaļa View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

2. attēls: sāni View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

3. attēls: Leņķis View ar tālvadību - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

4. attēls. Aizmugure View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Iestatīšana

4.1. Izvietošana

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Strāvas pieslēgums

1. Connect the supplied power cord to the projector's power inlet.
2. Pievienojiet otru strāvas vada galu iezemētai elektrības kontaktligzdai.

4.3 Ievades avotu pievienošana

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Salikts video: Use the A/V cable to connect to devices with composite video output.
• S-Video: Connect to devices with S-Video output.
• Audio ieeja: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Ensure all cables are securely connected before powering on the projector.

5. Lietošanas instrukcijas

5.1 Ieslēgšana/izslēgšana

• Lai ieslēgtu, nospiediet Jauda button on the control panel or remote control. The power indicator light will illuminate.
• Lai izslēgtu, nospiediet Jauda button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2. Attēla pielāgošana

• Fokuss: Grieziet projektora objektīva fokusēšanas gredzenu, līdz attēls ir ass un skaidrs.
• Atslēgas trauks: Izmantojiet Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3. Avota izvēle

Nospiediet pogu Avots button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navigācija izvēlnē

Nospiediet pogu Izvēlne/Iziet button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Izvēlieties or Ievadiet button to confirm selections. Press Izvēlne/Iziet again to close the menu.

5.5 Eko režīms

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Apkope

6.1 Lamp Aizstāšana

Projektors lamp ir ierobežots kalpošanas laiks. Kad lamp indikators (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Uzmanību: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2. Tīrīšana

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Traucējummeklēšana

8. Specifikācijas

9. Garantija un atbalsts

9.1 Produkta garantija

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5 gads ierobežota garantija uz projektora.
• 2 gada pilna garantija sedzot detaļas un darbu.
• 6 mēnešu garantija uz lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webvietne.

9.2 Tehniskais atbalsts

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webvietnē vai pievienotajā dokumentācijā.

10. Related Product Information (IN130 Series)

Šis video sniedz pārskatuview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.