LUTRON L-REPPRO RA2 Select Wireless Repeater
Please read before installing
Contents supplied:
Lutron Wireless Repeater* (L-REPPRO)
5V⎓ 100mA
0301867 Rev A
Power Supply
(T-5DC-USB)
Input: 100-240 V 50/60 Hz 100 mA
Output: 5 V⎓ 550 mA
* Connected to a Class 2, LPS, or SELV, limited energy (<15 W) power source only.
Install the Lutron Wireless Repeater
A. Connect the power cord to the Wireless Repeater and plug it into an outlet within 60 ft (18 m) from the Main Repeater or Bridge.
Download the Lutron app and walk through setup
 |
 |
 |
Note: For RadioRA 2 main repeaters, use the RadioRA 2 design software to activate the Lutron Wireless Repeaters into the system.
Warranty
For warranty information, please visit www.lutron.com/warranty
Lutron, Lutron, and 
are trademarks of Lutron Electronics Co., Inc. registered in the U.S. and other countries. RadioRA 2 is a trademark of Lutron Electronics Co., Inc.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc.
©2017 Lutron Electronics Co., Inc.
Extend Your Warranty
Love Lutron products? Have ideas for making them better? Tell us what you think and we’ll extend your warranty by 1 year.
www.lutron.com/RegisterRA2Select
Customer Assistance
U.S.A. and Canada: 1.844.LUTRON1
Fax: +1.610.282.6311
Mexico: 1.888.235.2910
Other countries: + 1.610.282.3800
www.lutron.com/support
Documents / Resources
 |
LUTRON L-REPPRO RA2 Select Wireless Repeater [pdf] Owner's Manual L-REPPRO, L-REPPRO RA2 Select Wireless Repeater, RA2 Select Wireless Repeater, Wireless Repeater, Repeater |
