Luminex LOGOgigacore lot logoPreliminary
PRODUCT
SPECIFICATIONS
Luminex GigaCore 10t 10 Gigabit Ethernet Switch - fig1Luminex GigaCore 10t 10 Gigabit Ethernet Switch - fig1

APPLICATIONS

Gigabit Ethernet switch
The GigaCore 10t is a 10 Gigabit Ethernet switch for Professional touring applications in lighting, audio and video with a frequent tear-down & built-up requirement or for any other application where ruggedized connectivity is necessary.
It is designed to support the most advanced AV protocols out of the box and is the backbone for a converged network, allowing multiple applications to co-exist on the same network.
The combination of GigaCore 10t and Araneo software platform is the ideal solution to deploy an entire AV network in just a few clicks.
Each GigaCore switch can be configured by an intuitive built-in AV Web UI.
Araneo, the network monitoring, planning and management software will ensure consistent management across the entire Luminex network.
The use of Araneo together with GigaCore switches will increase your productivity and confidence in the network as well as significantly reduce commissioning time.
An e-ink display informs the user about important parameters of the switch also when the device is not powered.
GigaCore 10t is an indispensable part of any mobile AV network where reliability and a quick and easy setup are needed.
As a user, you don’t need to make choices nor tradeoffs as GigaCore manages most AV protocols for you out of the box: Pre-defined QoS/DiffServ (Quality of Service) settings, optimized IGMP (Internet Group Management Protocol) per group (VLAN) and pre-defined yet editable groups (VLANs) to easily separate your network in different applications making converged networks obvious, easy, and reliable.
Also included out of the box, is the advanced, automated redundancy protocol RLinkX that ensures redundant links and supports a ring topology within your GigaCore network.
Bandwidth, connectivity, and port availability are not an issue anymore with the option of 2 x rugged fiber connection ports capable of data transfer speeds of up to 10 Gbps and 8 x 1Gbps copper ports with rugged EtherCON connectors that ensure robust connectivity.
Time synchronization is crucial in many applications; GigaCore 10t offers you a hassle free PTPv2 enabled switch which will work for most major audio protocols (e.g., AES67, ST2110, Dante, Q-sys/Q-lan, …) without the need for making complicated configurations.
Furthermore AVB/MILAN is supported out of the box on the management group (VLAN) and can operate simultaneously with the aforementioned PTPv2 applications in a converged network on different Groups (VLANS).
Entertainment and touring setups constantly push the limits. The deployment of PoE powered devices is continuously increasing. GigaCore 10t is ahead of this trend by offering PoE++ as an option on all copper ports (90W per port with a total PoE budget of up to 450W.
Great care has been taken to ensure silent operation by means of intelligent fan control, giving you more options with peace of mind that no live audience or recording session would be disturbed.
GigaCore 10t is the ideal touring network solution offering rugged, out of the box performance, #convergednetworkingmadeeasy and with its half 19” format it is ideally suited to create a full A/B redundant AV network in a single rack space.

Applications:

  • Live events
  • Touring
  • Convention centers
  • Large system integrations
  • Sports arenas
  • Broadcast and recording studios, OB vans
  • Theme parks
ORDERING INFORMATION 10GB
Product name: Part numbers:
GigaCore 10t -10G-(Neutrik DUOMMF) LU 01 00079-NDM-10G
GigaCore 10t -10G-(Neutrik DUOMMF + PoE++) LU 01 00079-POE-NDM-10G
GigaCore 10t -10G-(NeutrikQUAD MMF) LU 01 00079-NQM-10G
GigaCore 10t -10G-(NeutrikQUAD MMF + PoE++) LU 01 00079-POE-NQM-10G
GigaCore 10t -10G-(NeutrikDUO SMF) LU 01 00079-NDS-10G
GigaCore 10t-10G- (NeutrikDUO SMF + PoE++) LU 01 00079-POE-NDS-10G
GigaCore 10t -10G-(NeutrikQUAD SMF) LU 01 00079-NQS-10G
GigaCore 10t-10G- (NeutrikQUAD SMF + PoE++) LU 01 00079-POE-NQS-10G
GigaCore 10t-10G- (Fiberfox 2ch MMF) LU 01 00079-F2M-10G
GigaCore 10t-10G- (Fiberfox 2ch MMF) LU 01 00079-POE-F2M-10G
GigaCore 10t-10G-(Fiberfox 4ch MMF) LU 01 00079-F4M-10G
GigaCore 10t-10G-(Fiberfox 4ch MMF + PoE++) LU 01 00079-POE-F4M-10G
ORDERING INFORMATION 1GB
Product name: Part numbers:
GigaCore 10t -1G-(8 etherCON) LU 01 00079-1G
GigaCore 10t -1G-(8 etherCON + PoE++) LU 01 00079-POE-1G
GigaCore 10t -1G-(Neutrik DUOMMF) LU 01 00079-NDM-1G
GigaCore 10t -1G-(Neutrik DUOMMF + PoE++) LU 01 00079-POE-NDM-1G
GigaCore 10t -1G-(NeutrikQUAD MMF) LU 01 00079-NQM-1G
GigaCore 10t -1G-(NeutrikQUAD MMF + PoE++) LU 01 00079-POE-NQM-1G
GigaCore 10t -1G-(NeutrikDUO SMF) LU 01 00079-NDS-1G
GigaCore 10t-1G- (NeutrikDUO SMF + PoE++) LU 01 00079-POE-NDS-1G
GigaCore 10t -1G-(NeutrikQUAD SMF) LU 01 00079-NQS-1G
GigaCore 10t-1G- (NeutrikQUAD SMF + PoE++) LU 01 00079-POE-NQS-1G
GigaCore 10t-1G- (Fiberfox 2ch MMF) LU 01 00079-F2M-1G
GigaCore 10t -1G-(Fiberfox 2ch MMF + PoE++) LU 01 00079-POE-F2M-1G
GigaCore 10t-1G-(Fiberfox 4ch MMF) LU 01 00079-F4M-1G
GigaCore 10t-1G-(Fiberfox 4ch MMF + PoE++) LU 01 00079-POE-F4M-1G

APPLICATION DIAGRAM

Luminex GigaCore 10t 10 Gigabit Ethernet Switch - AUDIOLIGHTING

TECHNICAL SPECIFICATIONS

MECHANICAL GigaCore 10t
Enclosure Robust all metal housing
Dimensions (WxDxH) 220 x 330 x 44 mm (8,66″ x 13″ x 1,73″)
Material thickness 2mm
Surface Powder coated
Mounting type Rack mount, Truss mount M10 (2x)
Weight 3,4kg
Packaging dimensions 550 mm x 335mm x 68 mm
Packaged weight TBC
CONNECTIVITY
 

Network

2x 10 Gbps / 1 Gbps Rugged fiber connectors on front panel (Optional), independent from other ports 4 x Gigabit (10/100/1000 BASE-T) EtherCON on front panel

4 x Gigabit (10/100/1000 BASE-T) EtherCON on rear panel

Serial N/A
Power 1x PowerCON True1 in
Backup power N/A
Backup PoE N/A
TEMPERATURE MANAGEMENT
Intelligent control Yes
Number of fans 2
Position of fans Rear panel
Airflow direction Front to rear
Noise level TBC
USER INTERFACE
 

 

Device status

RGB LEDs
•  OK
•  Power
•  RLinkX
•  PoE
Dynamic labeling E-ink Display
 Fiber port status 2x RGB LED
Port Speed/Activity Port Status
•  Group indication
  Cu Port Status 2x RGB LED
Port Speed/Activity Port Status
•  Group indication
•  PoE
FIBER PORT SPECIFICATIONS
Port speed 10G BASE-X or 1000 BASE-X
Port sensing Fixed speed
COPPER PORT SPECIFICATIONS
Port Speed 10/100/1000 BASE-T
Port Sensing Auto Negotiation
Auto Crossover MDI/MDIX (allows use of straight or cross wired cable)
Auto Sensing Full or Half Duplex (Gigabit is Full Duplex)
POWER OVER ETHERNET
 Standards 802.3af
802.3at
802.3bt
PoE Ports 802.3af, 802.3at, 802.3bt
Total PoE power budget 450W
LLDP Support Yes
 

Power allocation

User configurable:

•  Priority per port

•  Consumption vs Class/LLDP based

Power limit •  Total power budget firmware limit – port shutdown at overload based on port priority
•  Per port hardware and firmware power limits based on classification – port shutdown at overload
SWITCH FEATURES
Boot time 45 s
Redundant links Yes
Group function Yes
  Ethernet compliance IEEE 802.2
IEEE 802.3 IEEE 802.3u
IEEE 802.3x Flow Control
IEEE 802.3ab Gigabit Ethernet IEEE 802.3af PoE(optional) IEEE 802.3at PoE+(optional)
IEEE 802.3bt PoE++ 90W(optional) IEEE 802.3ae
IEEE 802.1p CoS
IEEE 802.1d Spanning Tree
IEEE 802.1w Rapid Spanning Tree IEEE 802.1s Multiple Spanning Tree IEEE 802.1Q VLAN
IEEE 802.1Qav MVRP
IEEE 802.1 BA-2011 -> AVB (Audio Video Bridging) IEEE 802.1ab LLDP
IEEE 1588-2008 PTPv2
Jumbo frames Yes, supported up to 12000 MTU (with restrictions when using AVB)
 Supported protocols Avnu AVB/Milan (Free of license)
Dante
RAVENNA/AES67
Ethersound Q-SYS/Q-LAN IPMX
sACN
ArtNet MANet HogNet
RTTrPL (BlackTrax)
Audio protocol compliance Yes, low jitter and hardware timestamping (IEEE 1588-2008)
Ethernet switch type Full non- blocking wire-speed switching performance
Memory Flash 1 Gb RAM – 8 Mb NOR flash 4 Gb EMMC storage
Mac Adress table 16384 entries
Adress learning / aging Self learning, Auto aging
Switching troughput 56 Gbps (10Gbps versions)
IGMP Querrier Yes (V1|V2) (V3 compatible)
IGMP Snooping Yes, enabled by default (V1|V2|V3)
MANAGEMENT
Configuration Built-in WebUI
Network wide configuration Yes, with Araneo software
Firmware upgrades Via WebUI or network wide with Araneo – Contingency option with second FW file stored
POWER
Power input 100-240 VAC
Backup power NA
Backup PoE NA
Power consumption TBC
ENVIRONMENTAL
Operating temperature 0 to +50 °C
Storage temperature -10 to +70 °C
Humidity (non condensing) 5 to 95% RH
APPROVALS PENDING
 Electromagnetic emmissions and immunity FCC Part 15 CFR 47 class A CAN/ICES-003
EN 61000
EN 55032
EN 55024
  Safety IEC 62368-1
EN 62368-1
UL 62368-1
CAN/CSA-C22.2 No. 62368-1
  Certificates and approvals cSGSus Mark (UL) CE Mark
UKCA Mark
CB Certificate
Green RoHS
REACH

Description: Technical specifications GigaCore 10t | PRELIMINARY
Luminex reserves the right to modify the technical specifications at any given time without prior notice.
No rights can be claimed from these specifications.
MADEN BELGIUM

Luminex LOGOSlamstraat 13 | 3600 Genk
Belgium 
T +32 11 812 189 
info@luminex.be 
www.luminex.be

Documents / Resources

Luminex GigaCore 10t 10 Gigabit Ethernet Switch [pdf] User Manual
GigaCore 10t 10 Gigabit Ethernet Switch, GigaCore 10t, 10 Gigabit Ethernet Switch, Ethernet Switch, Switch

References

Leave a comment

Your email address will not be published. Required fields are marked *