Lumens OIP-N40E,OIP-N60D Video to IP/NDI HX HD Encoder Installation Guide

OIP-N40E,OIP-N60D Video to IP/NDI HX HD Encoder

“

Specifications:

• Product Models: OIP-N40E, OIP-N60D, OIP-N60D Dante AV-H
• Interface: Ethernet
• Username: admin
• Password: 9999 (Default)

Product Usage Instructions:

1. Tools Required:

Ensure you have the following tools ready for the firmware
upgrade process:

• Computer
• Ethernet Cable
• PoE Switch and Router

2. Connections for Firmware Upgrade:

Follow these steps to connect the device for firmware
upgrade:

1. Connect the OIP-N40E / OIP-N60D / OIP-N60D Dante AV-H to the
   switch or router using an Ethernet cable.
2. Connect your computer to the same switch or router using
   another Ethernet cable.

3. Firmware Upgrade Steps:

1. Open a browser and enter the IP address of the camera in the
   address bar. You can find the IP address under [Status] >
   [Ethernet] in the menu.
2. Enter the default username and password to log in: Username:
   admin, Password: 9999
3. Select [Maintenance], choose the firmware file, and click
   [Upgrade].
4. The firmware download will start; do not close the page (this
   may take around 2-3 minutes).
5. Log in again and check the firmware version under [About] >
   [Firmware Version].

Frequently Asked Questions (FAQ):

Q: What should I do if the firmware upgrade process fails?

A: If the firmware upgrade fails, ensure that the connection is
stable and try the upgrade process again. If the issue persists,
contact customer support for assistance.

“`

OIP-N40E_OIP-N60D_OIP-N60D Dante AV-H

Firmware(FW) Upgrade Instruction

1 Tools OIP Devices

Computer

Ethernet Cable PoE Switch and Router

2 Connections for FW upgrade 2.1 Connecting OIP-N40E / OIP-N60D / OIP-N60D Dante AV-H via switch or router.

Ethernet Cable

Ethernet Cable PC

Switch or Router

Laptop
3 FW upgrade 3.1 Open browser and enter the IP address of the camera in the address bar. You can check the IP address from [Status]> [Ethernet] in the menu.

3.2 Enter the username and password to log in webpage. Username: admin Password: 9999(Default)

FW046 – OIP-N40E_OIP-N60D_OIP-N60D Dante AV-H FW Update Manual

3.3 Select [Maintenance]> […] to select firmware file and press [Upgrade]. 3.4 FW download starts, please don’t close the page. (Around 2-3 minutes taken) 3.5 Login webpage again and check the FW version from [About]> [Firmware Version].
FW046 – OIP-N40E_OIP-N60D_OIP-N60D Dante AV-H FW Update Manual

Documents / Resources

Lumens OIP-N40E,OIP-N60D Video to IP/NDI HX HD Encoder [pdf] Installation Guide OIP-N40E, OIP-N60D, OIP-N40E OIP-N60D Video to IP NDI HX HD Encoder, OIP-N40E OIP-N60D, Video to IP NDI HX HD Encoder, IP NDI HX HD Encoder, HX HD Encoder, HD Encoder

References

• User Manual