Lumens LC300S 4 Channel Recorder and Streaming Media Processor
Product connection
*12G-SDI is only applicable to LC300S
- Connect the HDMI MultiView output to the display panel to show the real-time operation menu (the default output is director screen, click HOME return to the menu)
- Connect the keyboard/mouse through the USB port and use the keyboard/mouse to select the menu settings
| Items | Name | Function Descriptions |
| 1 | System Settings | Perform the system network setting, recording/streaming encoded setting |
| 2 | Director Management | Input signal selection, audio source management, recording/streaming control, output version selection, and network video camera control |
| 3 | File Management | Conduct the video file content management, including the following functions: upload, download, delete, replay video files |
| 4 | About | Display the current firmware version and relevant production information of device |
| 5 | Device IP | When connecting to the router, the current assigned device IP address will be displayed |
Webpage management
- Confirm the IP address of the device
Connect the WAN to the router and get the IP address of the device in the HDMI MultiView output screen. - Input the device’s IP address into a web browser to access the webpage management login interface.
Enter the account/password to log in 
- Account: admin
- Password: admin
Search and add video sources
- System Settings (Configuration) > Video Source Support HDMI/ SDI/ USB/ IP signal source settings *12G-SDI is only applicable to LC300S
- Physical Video Source Manager
Click [Edit] to edit the HDMI signal source name and resolution
*LC300S supports 12G-SDI signal sources and can switch signal sources on the Video Input1 edit page
- USB Video Source
Click [+Add], select the USB signal source device and apply to add.
- Network Source Manager
Support automatic search for network cameras within the local area network or manually add RTSP/SRT streams - Network Source
- Click [Refresh] to search for network cameras within the local area network
- Select Camera, click [Login]
- Enter username/account, click [Authentication]
- Certification complete, status displayed as [OK]
- Network Stream
Click [Add], enter the streaming information, manually add RTSP/SRT streams
Video Channel Manager
- Click on [Edit]
- The online video sources will be displayed in a list, please drag the source to the desired channel
- Go to the director’s management page and set up the channel signal source
- Click [Video], select the channel video source
- Click [
] to preview the screen of each channel signal source 4.3.3 PVM: Click [ ] to output the preview screen - PGM: Click [] to output the director’s screen
- If you want to switch scenes, click [CUT] to switch to the director’s screen
Director Management
Follow these steps to access the Director Management Interface
- HDMI MultiView output
- Log in to the web page by entering the online Director’s Account / Password (default setting: director/director)
Copyright © Lumens Digital Optics Inc. All rights reserved,
www.MyLumens.com
Frequently Asked Questions
- Q: What signal sources are supported by LC300S?
A: LC300S supports 12G-SDI signal sources in addition to HDMI, SDI, USB, and IP sources. - Q: How do I add USB video sources?
A: In the Video Source Manager, click [+Add], select the USB signal source device, and apply to add it to the system. - Q: How can I access the Director Management Interface?
A: Connect to the HDMI MultiView output and log in to the web page using the provided credentials. From there, you can access and manage director settings.
Documents / Resources
 |
Lumens LC300S 4 Channel Recorder and Streaming Media Processor [pdf] Installation Guide LC300, LC300S, LC300S 4 Channel Recorder and Streaming Media Processor, LC300S, 4 Channel Recorder and Streaming Media Processor, Recorder and Streaming Media Processor, Streaming Media Processor, Media Processor, Processor |