Lumens LC200 Capture Vision Station
Product Specifications
- Product Name: LC200 (CaptureVision Station)
- Connectivity: USB, RS-232/RS-485 (x2)
- Power Input: DC IN 12V
- Supported Interfaces: HDMI, USB 2.0, USB 3.0, Ethernet
- Recording Options: Single Channel, Three Channel, Customize
- Additional Features: PIP, PBP, MultiView
Product Usage Instructions:
1. Initial Setup:
Ensure that the device is connected to a power source using the provided DC IN 12V input.
2. Connectivity:
Connect your input sources such as HDMI or Line In to the corresponding ports on the device.
3. Recording Options:
Select the desired recording mode from the options available including Single Channel, Three Channel, or Customize.
4. Additional Features:
Explore additional features like Picture-in-Picture (PIP), Picture-by-Picture (PBP), and MultiView for enhanced viewing experience.
5. Network Configuration:
Configure network settings such as DHCP IP and IP address to
enable communication over the network.
Frequently Asked Questions
Q: How do I reset the device password?
A: To reset the password, use the default credentials – username: admin, password: admin.
“`
Documents / Resources
 |
Lumens LC200 Capture Vision Station [pdf] Instruction Manual LC200 Capture Vision Station, LC200, Capture Vision Station, Vision Station, Station |
