0-10 V to PWM Converter
Installation Instructions
READ ALL SAFETY INSTRUCTIONS FIRST
› Follow all safety instructions carefully. Failure to do so will void warranty.
› Ensure installation complies with local electrical rules and regulations
› Luminaires and transformers to be installed by licensed electrical contractors.
› Luminaires to be used for intended purpose only.
› Do not operate the luminaires with a missing or damaged parts.
› Use only genuine parts to replace damaged or missing components.
› Please refer to the instructions for installation and operating requirements.
Voltage insulation test (megger) will permanently damage product and void warranty.
Input Voltage: 100-240 V AC
Power Consumption: 10W maximum
IP Rating: IP65
Ambient Temperature: Ta 50ºC
Installation
STEP 1
Drill holes to install glands as required.
Three glands are included with the enclosure. See wiring diagram on back for more information.
Products and specifications are subject to change without notice.
Wiring Configuration
Technical Drawings
Dimming Diagram
Lutron Novat NTSTV-DV Controller
Fixture Loading = 20
0-10 V Output
Fixture Loading = 20
Compatibility Chart
Low Voltage Single Channel 12V AC or 24V DC RM1603 (T3) | Low Voltage Triple Channel 12V AC or 24V DC RM3682 (Triple T3) | Low Voltage Triple Channel 12V AC or 24V DC RM2526 (Brick) | Low Voltage Single Channel 30V DC RM3706 (COB) | |
G411-LED | ● | |||
G421-LED | ● | |||
G422-LED | ● | |||
G431-LED | ● | |||
G451-LED | ● | |||
G461.-LED | ● | |||
G511-LED | ● | |||
G512-LED | ● | |||
G521LED | ● | |||
G522-LED | ● | |||
LS121LED | ● | |||
LS121-2LED | ● | |||
LS134LED | ● | |||
LS151LED | ● | |||
LS192-2LED | ● | |||
LS192LED | ● | |||
LS201LED | ● | |||
LS321-2LED | ● | |||
LS321LED | ● | |||
LS3333ANS-2LED | ● | ● | ||
LS333ANS-2COB | ● | |||
LS375LED | ● | ● | ||
LS411LED | ● | |||
LS553LED | ● | |||
LS563LED | ● | ● | ||
LS731LED | ● | |||
LS741LED | ● | |||
LS751-2LED | ● | |||
LS751LED | ● | |||
LS762LED | ● | |||
LS772LED / LS722-2LED | ● | |||
LS782LED | ● | |||
LS793LED | ● | |||
LS9401LED | ● | |||
LS9402LED | ● | |||
LS9403LED | ● | |||
LS9404LED | ● | |||
LS9405LED | ● | |||
LS9406LED | ● | |||
LS9407LED | ● |
ASIA PACIFIC Brisbane Technology Park 18 Brandl Street, Eight Mile Plains Queensland, 4113, Australia P: +61 7 3854 5000 F: +61 7 3854 5001 E: sales@lumascape.com |
CHINA 20 West Building 377 Wuyi Road Wujin Hi-Tech Zone, Changzhou Jiangsu, China P: +86 519 8919 2555 F: +86 519 8919 1053 E: chinasales@lumascape.com |
NORTH AMERICA 1940 Diamond Street, San Marcos California, 94070 United states P: +1 650 595 5862 F: +1 650 595 5820 E: info@lumascape.com |
MIDDLE EAST, NORTH AFRICA, INDIA, TURKEY Dubai World Central Building Block C, Office #432 Dubai, United Arab Emirates P: +97 4887 9951 or +97 1 54300 0421 F: +971 4887 9601 E: sales@lumascapeme.ae |
FOLLOW USwww.lumascape.com
Documents / Resources
![]() |
LUMASCOPE LS6125-3 PWM To Voltage Converter Module [pdf] Installation Guide LS6125-3 PWM to Voltage Converter Module, LS6125-3, PWM to Voltage Converter Module, Voltage Converter Module, Converter Module, Module |