LUMANTEK ez-HSV+ HDMI to SDI Converter with Display and Scaler

Introduction

Ez-HSV+(HDMI to SDI Converter with Display and Scaler) ez-HSV+ is an HDMI to SDI with Scaler Converter with 1 x HDMI input and 2 x SDI outputs. It receives External Analog Audio (Stereo) input which can be embedded into the video. Ez-HSV+ is a mini converter that can display incoming video through 2.7inch TFT-LCD. The display shows input audio level meter and input & output resolutions. Resolution can be up or down scaled (from 480i to 1080p60) with a DIP switch.

Features

1.  Supports SD/HD/3G
2.  HDMI Video In: : SD/HD/3G (HDMI Type A) x1
3.  SDI Video Output: SD/HD/3G-SDI (BNC 75Ω) x2
4.  Audio IN: Analog audio (3.5mm Stereo Jack) x1
5.  LCD Display :2.7inch TFT-LCD x1
6.  MODE : Push Switch x1

Block Diagram

 Product Interface

DIP Switch setting

MODE Switch Settings

1.  LCD Backlight brightness control (Dark or Bright)
   MODE Switch Settings
2.  LCD Screen ON/OFF
   MODE Switch Settings
3.  LCD Screen rotation (0 or 180 degrees)

System Information

LCD Screen Configuration

Product Configuration

Documents / Resources

LUMANTEK ez-HSV+ HDMI to SDI Converter with Display and Scaler [pdf] User Manual ez-HSV, HDMI to SDI Converter with Display and Scaler, ez-HSV HDMI to SDI Converter with Display and Scaler

References

• User Manual