Pico Pro Micro Linux Development Boards

Product Information

Specifications

• • Luckfox Pico:
    • Chip: Rockchip RV1103
    • Processor: Cortex A7 1.2GHz
    • Memory: 64MB DDR2
    • Camera Interface: MIPI CSI 2-lane
    • USB: USB 2.0 Host/Device
    • GPIO: 24 GPIO pins
    • Ethernet: No
    • Default Storage Medium: Micro SD Card
  • Luckfox Pico Mini A:
    • Chip: Rockchip RV1106
    • Processor: Neural Network Processor (NPU)
    • Memory: 128MB DDR3L
    • Camera Interface: MIPI CSI 2-lane
    • USB: USB 2.0 Host/Device
    • GPIO: 17 GPIO pins
    • Ethernet: 10/100M Ethernet controller and
      embedded PHY
    • Default Storage Medium: SPI NAND FLASH
      (128MB)

Product Usage Instructions

Getting Started Tutorial

To begin using your Luckfox Pico device, follow these steps:

1. 1. Ensure all necessary components are included in the
      package.
   2. Refer to the Getting Started Tutorial in the user manual for
      initial setup instructions.
   3. Connect the device to a power source and follow the on-screen
      prompts.

Burning Images

To burn images onto your Luckfox Pico device, follow these
steps:

1. 1. Access the image burning feature on the device.
   2. Select the image file you wish to burn.
   3. Start the burning process and wait for it to complete.

Frequently Asked Questions (FAQ)

Q: What are the supported application scenarios for the Luckfox
Pico development board?

A: The Luckfox Pico development board is suitable for
applications in smart home devices, industrial automation
equipment, robots and drones, intelligent monitoring devices,
intelligent transportation equipment, and smart medical
devices.

Q: What interfaces are supported by the Luckfox Pico
development board?

A: The development board supports interfaces such as GPIO, UART,
SPI, I2C, USB, etc., facilitating rapid development and debugging
for developers.

LUCKFOX

Warranty and After-Sales Service Core3566 Luckfox Pico
Getting Started Tutorial Version introduction Preparations LuckFox Pico image burning
LuckFox Pico Mini A image burning LuckFox Pico Mini B image burning LuckFox Pico Plus image burning LuckFox Pico Pro/Max image burning Serial Debugging USB Debugging Network ADB Debugging File Transfer SDK Environment Deployment CSI camera Peripherals and Interfaces Compatible devices BusyBOX System Configuration Quality community sharing FAQ Download

User Manual

>

LUCKFOX-Pico

GitHub

Luckfox Pico

Getting Started Tutorial

Getting Started Tutorial

Introduction
LuckFox Pico Luckfox Pico Mini A/B and LuckFox Pico Plus are low-cost micro Linux development boards based on the Rockchip RV1103 chip, while LuckFox Pico Pro and LuckFox Pico Max are low-cost micro Linux development boards based on the Rockchip RV1106 chip. RV1103/RV1106 is a highly integrated IPC visual processing SoC designed for AI-related applications. It is built on a single-core ARM Cortex-A7 32-bit core with integrated NEON and FPU, and features a built-in NPU that supports INT4/INT8/INT16 mixed operations, with a computing power of up to 0.5 TOPs.
Furthermore, it features a new hardware-based ISP that supports various algorithm accelerators such as HDR, 3A, LSC, 3DNR, 2DNR, sharpening, haze removal, gamma correction, and more. Additionally, it has a built-in 16-bit DDR2 DRAM to maintain demanding memory bandwidth, as well as built-in POR, audio codec, and MAC PHY. In essence, the RV1103 is a powerful processor suitable for various AI application scenarios.
This development board is suitable for applications in various scenarios, including but not limited to:
Smart home devices Industrial automation equipment Robots and drones Intelligent monitoring devices Intelligent transportation equipment Smart medical devices
The development board supports multiple interfaces, including GPIO, UART, SPI, I2C, USB, etc., facilitating rapid development and debugging for developers.

Product Parameters

Luckfox Pico

Luckfox Pico Mini A

Luckfox Pico Mini B

Luckfox Pico Plus

Luckfox Pico Pro

Luckfox Pico Max

Chip

Rockchip RV1103

Rockchip RV1106

Processor

Cortex A7 1.2GHz

Neural Network Processor (NPU)

0.5 TOPS, supports int4, int8, int16

Image Processor (ISP) Max input 4M @30fps

Max input 5M @30fps

Memory

64MB DDR2

128MB DDR3L

256MB DDR3L

Camera Interface

MIPI CSI 2-lane

USB

USB 2.0 Host/Device

USB 2.0 Host/Device

USB 2.0 Host/Device

GPIO

24 GPIO pins

17 GPIO pins

25 GPIO pins 26 GPIO pins

Ethernet

No

10/100M Ethernet controller and embedded PHY

Default Storage Medium

Micro SD Card

SPI NAND FLASH (128MB)

SPI NAND FLASH (256MB)

Error Message

The `style` prop expects a mapping from style properties to values, not a string.

English

Edit this page

Previous
« Download

Next
Version introduction »

Search

K

Documents / Resources

LUCKFOX Pico Pro Micro Linux Development Boards [pdf] User Guide Pico Pro, Pico Pro Micro Linux Development Boards, Micro Linux Development Boards, Linux Development Boards, Development Boards, Boards

References

• User Manual