LTSYS SE-8 Series Intelligent LED Driver User Manual

SE-8 Series Intelligent LED Driver

Product Information

Specifications

  • Model: SE-8-100-G1T to SE-8-700-G1T
  • Features: Constant current, Triac/ELV,
    Isolation
  • Input Voltage: 9-42Vdc to 9-31Vdc
  • Output Voltage: 52Vdc
  • Output Current: 100mA to 600mA
  • Power Consumption: Max. 4.2W to 6.3W
  • Dimming Depth: 0.1% to 100%
  • Flicker/Stroboscopic Effect: 3% (Maximum
    current for non-dimming state), 3600Hz
  • Input Voltage Range: 220-240Vac, 220-240Vdc,
    230Vac
  • Safety Certifications: Class II (Suitable for
    class I/II/III light fixtures), IP50

Product Usage Instructions

  1. Installation:
  2. Ensure the power source is turned off before installation.
    Connect the driver according to the provided wiring diagram.

  3. Dimming Function:
  4. Utilize leading edge (Triac) or trailing edge (ELV) phase
    control dimming for adjusting the brightness levels. The dimming
    depth can be adjusted from 0.1% to 100%.

  5. Protection Features:
  6. The driver includes overheat, overvoltage, overload, and short
    circuit protection. It will automatically recover once the issue is
    resolved.

  7. Maintenance:
  8. The driver has a normal service life of up to 100,000 hours.
    Regularly check for any signs of damage or malfunction.

FAQ

Q: What should I do if the driver exceeds the rated power?

A: The device will automatically protect itself when the load
exceeds 102% of the rated power. Reduce the load to allow for
automatic recovery.

Q: Can the driver be used with all types of light
fixtures?

A: The driver is suitable for Class I, II, and III indoor light
fixtures.

“`

Intelligent LED Driver (Constant Current)

Housing made from SAMSUNG/COVESTRO’s V0 flame retardant PC materials. Ultra small, thin and lightweight, screwless end cap design. Leading edge (Triac), trailing edge (ELV) phase control dimming.
Soft-on and fade-in dimming function enhances your visual comfort
T-PWM super deep dimming technology, 0.1% dimming depth. The whole dimming process is flicker-free with high frequency
exemption level;
Overheat, over voltage, overload, short circuit protection and automatic recovery. Suitable for Class// indoor light fixtures. Normal service life can reach 100,000 hours. 5-year warranty (Rubycon capacitor).

DIM
Overheat Protection

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

The certification icon represents undergoing certification applications only, and final certification qualification subject to actual product.

V
Over voltage protection

Over Load protection

Short circuit protection

Technical Specs

MODEL FEATURES OUTPUT
INPUT
SAFETY &
EMC
ErP OTHERS

Output Type Dimming Interface Output Feature IP Rating Insulation Glass Output Voltage Max. Output Voltage(No-load) Output Current Output Power Load Power Range Dimming Range LF Current Ripple Current Accuracy PWM Frequency AC Voltage Range DC Voltage Range Input Voltage Frequency Input Current Power Factor Efficiency (Typ.) Inrush Current Anti Surge Leakage Current Operating Temperature Working Humidity Storage Temperature/Humidity Temperature Coefficient Vibration Overload Protection Overheat Protection Overvoltage Protection Short Circuit Protection Withstand Voltage Insulation Resistance
Safety Certifications
EMC Emission
EMC Immunity Power Consumption
Flicker/Stroboscopic Effect
DF Weight(N.W.) Dimensions

SE-8-100-G1T

SE-8-150-G1T

SE-8-200-G1T

Constant current

Triac/ELV

Isolation

IP50

Class II (Suitable for class I/ II /III light fixtures)

9-42Vdc

9-42Vdc

9-31Vdc

52Vdc

52Vdc

52Vdc

100mA

150mA

200mA

Max.4.2W

Max.6.3W

Max.6.2W

0.9-4.2W

1.35-6.3W

1.8-6.2W

0~100%Down to 0.1%

3% (Maximum current for non dimming state)

±5%

3600Hz

220-240Vac

220-240Vdc(EMI evaluation required after luminaire integration) 230Vac

50/60Hz 0.045A/230Vac

SE-8-250-G1T SE-8-300-G1T

9-25Vdc 52Vdc 250mA Max.6.25W 2.25-6.25W

9-21Vdc 52Vdc 300mA Max.6.3W 2.7-6.3W

SE-8-350-G1T
2-18Vdc 30Vdc 350mA Max.6.3W 3.15-6.3W

72%

76%

74%

74%

73%

75%

Cold start 10A(Test twidth=300us tested under 50% Ipeak)/230Vac L-N:1KV

Max.0.5mA

ta:-20°C~45°C tc:90°C

20~95%RHnon-condensing -40~80°C/10~95%RH

±0.03%/°C(-20°C~45°C)

10~500Hz, 2G 12min/1cycle, 72 min for X, Y and Z axes respectively Automatically protect the device when the load exceeds 102% of the rated power. Automatically recover once load is reduced

Intelligently adjust or turn off the current output if the PCB temperature 110°C. When the PCB temperature <90°C, automatically recover normal output Automatically protect the device when voltage exceeds the no-load voltage. It can be recovered automatically Enter hiccup mode if short circuit occurs, and recover automatically

I/P-O/P: 3750Vac

I/P-O/P: 100M/500VDC/25/70%RH

CCC China

GB19510.1GB19510.14GB19510.213

TUV Germany

EN61347-1EN61347-2-13EN62493

CB

CB Member States IEC61347-1IEC61347-2-13

CE

European Union

EN61347-1EN61347-2-13EN62384

KC

Korea

KC61347-1KC61347-2-13

EAC Russia

IEC61347-1IEC61347-2-13

RCM ENEC BIS CCC CE KC EAC RCM

Australia Europe India China European Union Korea Russia Australia

AS 61347-1AS 61347-2-13 EN61347-1EN61347-2-13EN62384 IS 15885 (PART 2/SEC 13) GB/T17743GB17625.1 ENIEC55015ENIEC61000-3-2EN61000-3-3 KSC 9815, KSC 9547 IEC62493IEC61547EH55015 EN55015EN61000-3-2EN61000-3-3EN61547

EN61000-4-2,3,4,5,6,8,11,EN61547

Networked standby

Standby power consumption without network connection (when the thyristor signal is 0, the power consumption is 0)

No-load power consumption No no-load mode

IEEE1789

Meet IEEE 1789 standard/High frequency exemption level

CIE SVM Phase factor

PstLM1.0SVM0.4 DF0.9

50g±5g 84x20x20mm(LxWxH)

1

www.ltech-led.com

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

MODEL FEATURES

Output Type Dimming Interface Output Feature IP Rating Insulation Glass

OUTPUT

Load Power Range Dimming Range

INPUT

AC Voltage Range DC Voltage Range

SE-8-400-G1T

SE-8-450-G1T

SE-8-500-G1T

SE-8-550-G1T

Constant current

Triac/ELV

Isolation

IP50

Class II (Suitable for class I/ II /III light fixtures)

2-15.5Vdc

2-14Vdc

2-12.5Vdc

2-11.5Vdc

30Vdc

30Vdc

30Vdc

30Vdc

400mA Max.6.2W

450mA Max.6.3W

500mA Max.6.25W

550mA Max.6.3W

0.8-6.2W

0.9-6.3W

1-6.25W

1.1-6.3W

0~100%Down to 0.1%

3% (Maximum current for non dimming state)

±5%

3600Hz

220-240Vac

220-240Vdc(EMI evaluation required after luminaire integration) 230Vac

50/60Hz 0.045A/230Vac

SE-8-600-G1T

SE-8-650-G1T

SE-8-700-G1T

2-10.5Vdc 30Vdc 600mA Max.6.3W 1.2-6.3W

2-9.5Vdc 30Vdc 650mA Max.6.175W 1.3-6.175W

2-9Vdc 30Vdc 700mA Max.6.3W 1.4-6.3W

73%

73%

73%

L-N:1KV Max.0.5mA ta:-20°C~45°C tc:90°C
20~95%RHnon-condensing -40~80°C/10~95%RH ±0.03%/°C(-20°C~45°C)

73%

72%

72%

70%

Withstand Voltage Insulation Resistance

SAFETY &
EMC

Safety Certifications

EMC Emission

EMC Immunity

ErP

OTHERS

DF Weight(N.W.) Dimensions

Product Size
Unitmm

I/P-O/P: 3750Vac

I/P-O/P: 100M/500VDC/25/70%RH

CCC China

GB19510.1GB19510.14GB19510.213

TUV Germany

EN61347-1EN61347-2-13EN62493

CB

CB Member States IEC61347-1IEC61347-2-13

CE

European Union

EN61347-1EN61347-2-13EN62384

KC

Korea

KC61347-1KC61347-2-13

EAC Russia

IEC61347-1IEC61347-2-13

RCM Australia

AS 61347-1AS 61347-2-13

ENEC Europe

EN61347-1EN61347-2-13EN62384

BIS India CCC China CE

GB/T17743GB17625.1 ENIEC55015ENIEC61000-3-2EN61000-3-3

KC

KSC 9815, KSC 9547

EAC

IEC62493IEC61547EH55015

RCM

EN55015EN61000-3-2EN61000-3-3EN61547

EN61000-4-2,3,4,5,6,8,11,EN61547

Standby power consumption without network connection (when the thyristor signal is 0, the power consumption is 0) No no-load mode

IEEE1789

CIE SVM Phase factor

PstLM1.0SVM0.4 DF0.9

50g±5g 84x20x20mm(LxWxH)

84

20

190

190

10 20

Minimum hole size: 25mm (1″)
2

www.ltech-led.com

Wiring Diagram

TriacConnection
N
L
Triac dimmer 0-100% dimming range
ELVConnection
L N N1 L1
N L
ELV dimmer 0-100% dimming range

0.75 (Blue) (Brown)
Wire diameter: 0.75
0.75 (Blue) (Brown)
Wire diameter: 0.75

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

0.3 (Black) (Red)
Wire diameter: 0.3
0.3 (Black) (Red)
Wire diameter: 0.3

Surge Current & Corresponding Miniature Circuit Breaker (MCB) Load Capacity Table

MCB Model

B10 B13 B16 B20 B25 C10 C13 C16 C20 C25 D10 D13 D16 D20 D25

Maximum Load Capacity 20

26

32

40

40

23

30

37

47

58

27

34

42

53

66

Remarks 1. Test ConditionsCold start 10A(Test twidth=300us tested under 50% Ipeak)/230Vac 2.The number of supported drivers may vary depending on the brand and model of the MCB. 3.It is recommended not to exceed the specified load capacity during on-site installation. The actual load should be determined based on field conditions. 4.If the ambient temperature exceeds 30°C or multiple MCBs are installed side by side, the number of installed drivers must be reduced and recalculated accordingly. 5.Electricians typically use Type B MCBs for residential lighting and Type C MCBs for commercial lighting applications. 6.Different testing equipment may yield variations in measured current peaks and pulse widths. Always use professional-grade instruments for accurate testing.

Installation Precautions

15cm 15cm

15cm 15cm

15cm

Please do not stack the products. The distance between two products should be 15cm so as not to a ect heat dissipation and the lifespan of the products.
Note: The installation should be in line with the environmental operating temperature of the product. Do not install it inside the lamp to avoid exceeding the environmental operating temperature of the product, which may affect the product’s lifespan.

Please not place the products on LED drivers. The distance between the product and the driver should be 15cm so as not to a ect heat dissipation and shorten the lifespan of the products.

Woodiness

Gasket

Woodiness

Gasket

Do not x the product screws tightly against the wooden board. Instead, add a washer with a thickness of 7mm under the xing screws. Leaving some gaps can e ectively dissipate heat, preventing any impact on the product’s heat dissipation performance and service life.

3

www.ltech-led.com

Relationship Diagrams

E ciency[%]

85 80 75 70 65 60 55 50
50

E ciency vs Load

100mA 150mA 200mA 250mA 300mA 350mA 400mA

60

70

80

90

100

Load[%]

PF

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50
50

Power Factor Characteristic

100mA 250mA 400mA

150mA 300mA

200mA 350mA

60

70

80

90

100

Load[%]

THD

27 25 23 21 19 17 15 13 11
9 7 5
50

THD vs Load

100mA 300mA

150mA 350mA

200mA 400mA

250mA

60

70

80

90

100

Load[%]

Lifetime

Lifetime – Case Temperature
110,000 100,000
90,000 80,000 70,000 60,000 50,000 40,000 30,000 20,000
30 35 40 45 50 55 60 65 70 75 80 85 90 Case Temperature[Tc]

SE-8-100-400-G1T

E ciency[%]

85 80 75 70 65 60 55 50
50

E ciency vs Load

400mA 450mA 500mA 550mA 600mA 650mA 700mA

60

70

80

90

100

Load[%]

PF

0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50
50

Power Factor Characteristic

500mA 650mA

400mA 550mA 700mA

450mA 600mA

60

70

80

90

100

Load[%]

27 25 23 21 19 17 15 13 11 9 7 5
50

THD vs Load

550mA

400mA 600mA

450mA 650mA

500mA 700mA

60

70

80

90

100

Load[%]

Lifetime – Case Temperature
110,000 100,000 90,000 80,000 70,000 60,000 50,000 40,000 30,000 20,000
30 35 40 45 50 55 60 65 70 75 80 85 90 Case Temperature[Tc]

SE-8-400-700-G1T
4

www.ltech-led.com

THD

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

Flicker Test Sheet

IEEE 1789

Limit of modulation in low risk area

Waveform frequency of optical output f 8Hz
8Hz < f 90Hz

limit (%) 0.2
0.025 ×f

90Hz < f 1250Hz

0.08 ×f

f > 1250Hz

Exemption assessment

Limit of modulation in no effect area

Waveform frequency of optical output f 10Hz
10Hz <f 90Hz

limit (%) 0.1
0.01 × f

90Hz < f 3125Hz f > 3125Hz

(0.08/2.5) × f
Exemption assessment (High frequency exemption)

Brightness

100.00%

0.1%

1%

5%

10%

20%

30%

40%

10.00%

50%

60%

70% Modulation(%)

80%

90%

100%

1.00%

Modulation Area Diagram High Frequency Exemption Area Diagram

Marks in the right chart were tested results of different current ranges.
The output frequeny is 0Hz in 100% brightness and its corresponding modulation is 0%, which could not be shown in the right chart.

0.10% 1

10

100

1000

3125

10000

Frequency(Hz)

Packaging Specifications

Model Carton Dimensions Quantity Weight

SE-8-(100-700)-G1T 385×245×160mm(L×W×H) 20 PCS/Layer; 5 Layers/Carton; 100 PCS/Carton 0.055kg/PC;5.5kg/Box

Packaging Image

Inner Packaging Box

Carton Packaging
5

www.ltech-led.com

Transportation and Storage

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

1. Transportation Products can be shipped via vehicles, boats and planes. During transportation, products should be protected from rain and sun. Please avoid severe shock and vibration during the loading and unloading process. 2. Storage The storage conditions should comply with the Class I Environmental Standards. The products that have been stored for more than six months are recommended to be re-inspected and can be used only after they have been qualified.

Attentions
This product must be installed and adjusted by a qualified professional. This product is non-waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure. Good heat dissipation will extend the life the product. Please install the product in a environment with good ventilation. When you install this product, please avoid being near a large area of metal objects or stacking them to prevent signal interference. Please keep the product away from a intense magnetic field, a high pressure area or a place where lightning is easy to occur. Please check whether the working voltage used complies with the parameter requirements of the product. Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident. If a fault occurs, please do not attempt to fix the product by yourself. If you have any question, please contact the supplier.
This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.

Warranty Agreement
Warranty periods from the date of delivery: 5 years. Free repair or replacement services for quality problems are provided within warranty periods.
Warranty exclusions below: Beyond warranty periods. Any artificial damage caused by high voltage, overload, or improper operations. Products with severe physical damage. Damage caused by natural disasters and force majeure. Warranty labels and barcodes have been damaged. No any contract signed by LTECH.
1. Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law. 2. LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

Update Log

Version Updated Time

A0

20250822

Original version

Update Content

Updated by Li Haipeng

ZHUHAI LTECH TECHNOLOGY CO., LTD. Add: No. 183, Shui’an 1st Road, Xiangzhou District, 519060 Zhuhai City, PEOPLE’S REPUBLIC OF CHINA
6

Website: www.ltech-led.com

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

LED()
/PCV0; (Triac)(ELV) T-PWM 0.1%; 0-100%, ; 10 5

IEEE1789

V

() PWM (Typ.) /

ErP /

DF

SE-8-100-G1T

SE-8-150-G1T

Triac/ELV

IP50

II( )

9-42Vdc

9-42Vdc

52Vdc

52Vdc

100mA

150mA

Max.4.2W

Max.6.3W

0.9-4.2W

1.35-6.3W

0~100%:0.1%

3%

±5%

3600Hz 220-240Vac

SE-8-200-G1T

SE-8-250-G1T

9-31Vdc 52Vdc 200mA Max.6.2W 1.8-6.2W

9-25Vdc 52Vdc 250mA Max.6.25W 2.25-6.25W

SE-8-300-G1T
9-21Vdc 52Vdc 300mA Max.6.3W 2.7-6.3W

230Vac

50/60Hz 0.045A/230Vac

PF0.9/230Vac()

72%

76%

74%

74%

73%

10A(50%Ipeaktwidth=300us)@230Vac

L-N:1KV

Max.0.5mA

ta:-20°C~45°C tc:90°C

20~95%RH

-40~80°C/10~95%RH

±0.03%/°C(-20°C~45°C)

10-500HZ2G 12/X,Y,Z72

1.02

PCB(110°C)PCB90

3750Vac

100M/500VDC/25/70%RH

CCC TUV

GB19510.1GB19510.14GB19510.213 EN61347-1EN61347-2-13EN62493

CB

CB IEC61347-1IEC61347-2-13

CE

EN61347-1EN61347-2-13EN62384

KC

KC61347-1KC61347-2-13

EAC

IEC61347-1IEC61347-2-13

RCM

AS 61347-1AS 61347-2-13

ENEC

EN61347-1EN61347-2-13EN62384

BIS

CCC

IS 15885 (PART 2/SEC 13) GB/T17743GB17625.1

CE

ENIEC55015ENIEC61000-3-2EN61000-3-3

KC

KSC 9815, KSC 9547

EAC

IEC62493IEC61547EH55015

RCM

EN55015EN61000-3-2EN61000-3-3EN61547

EN61000-4-2,3,4,5,6,8,11,EN61547

(00)

IEEE1789

/

CIE SVM

PstLM1.0SVM0.4

DF0.9

50g±5g

84x20x20mm(LxWxH)

1

SE-8-350-G1T
2-18Vdc 30Vdc 350mA Max.6.3W 3.15-6.3W
75%

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

() PWM (Typ.) /

ErP
/

:mm

SE-8-400-G1T

SE-8-450-G1T

Triac/ELV

IP50

II( )

2-15.5Vdc

2-14Vdc

30Vdc

30Vdc

400mA

450mA

Max.6.2W

Max.6.3W

0.8-6.2W

0.9-6.3W

0~100%:0.1%

3%

±5% 3600Hz

220-240Vac

SE-8-500-G1T
2-12.5Vdc 30Vdc 500mA Max.6.25W 1-6.25W

SE-8-550-G1T
2-11.5Vdc 30Vdc 550mA Max.6.3W 1.1-6.3W

SE-8-600-G1T
2-10.5Vdc 30Vdc 600mA Max.6.3W 1.2-6.3W

SE-8-650-G1T
2-9.5Vdc 30Vdc 650mA Max.6.175W 1.3-6.175W

230Vac

50/60Hz 0.045A/230Vac

PF0.9/230Vac()

73%

73%

73%

73%

72%

72%

10A(50%Ipeaktwidth=300us)@230Vac

L-N:1KV

Max.0.5mA

ta:-20°C~45°C tc:90°C

20~95%RH

-40~80°C/10~95%RH

±0.03%/°C(-20°C~45°C)

10-500HZ2G 12/X,Y,Z72

1.02

PCB(110°C)PCB90

3750Vac

100M/500VDC/25/70%RH

CCC TUV

GB19510.1GB19510.14GB19510.213 EN61347-1EN61347-2-13EN62493

CB

CB IEC61347-1IEC61347-2-13

CE

EN61347-1EN61347-2-13EN62384

KC

KC61347-1KC61347-2-13

EAC

IEC61347-1IEC61347-2-13

RCM

AS 61347-1AS 61347-2-13

ENEC

EN61347-1EN61347-2-13EN62384

BIS

CCC

IS 15885 (PART 2/SEC 13) GB/T17743GB17625.1

CE

ENIEC55015ENIEC61000-3-2EN61000-3-3

KC

KSC 9815, KSC 9547

EAC

IEC62493IEC61547EH55015

RCM

EN55015EN61000-3-2EN61000-3-3EN61547

EN61000-4-2,3,4,5,6,8,11,EN61547

(00)

IEEE1789

/

CIE SVM

PstLM1.0SVM0.4

50g±5g

84x20x20mm(LxWxH)

84

SE-8-700-G1T
2-9Vdc 30Vdc 700mA Max.6.3W 1.4-6.3W
70%

20

190

190

10 20

25mm(1”) 2

Triac

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

N
L
Triac 0~100%
ELV

0.75 (Blue) (Brown)
0.75

0.3 (Black) (Red)
0.3

L N N1 L1
N L
ELV 0~100%

0.75 (Blue) (Brown)
0.75

0.3 (Black) (Red)
0.3

&(MCB)

B10 B13 B16 B20 B25 C10 C13 C16 C20 C25 D10 D13 D16 D20 D25

20

26

32

40

40

23

30

37

47

58

27

34

42

53

66

1. 10A(50%Ipeaktwidth=300us)@230Vac 2. 3. 4. 30 5. BMCBCMCB 6.

15cm 15cm

15cm 15cm

15cm

15cm

15cm

7mm

3

[%]

85 80 75 70 65 60 55 50
50

100mA 150mA 200mA 250mA 300mA 350mA 400mA

60

70

80

90

100

[%]

PF

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50
50

100mA 250mA 400mA

150mA 300mA 450mA

200mA 350mA

60

70

80

90

100

[%]

THD

27 25 23 21 19 17 15 13 11 9 7 5
50

THD

100mA 300mA

150mA 350mA

200mA 400mA

250mA 450mA

60

70

80

90

100

[%]

110,000

100,000

90,000

80,000

70,000

60,000

50,000

40,000

30,000

20,000 30 35 40 45 50 55 60 65 70 75 80 85 90

(Tc)

SE-8-(100-400)-G1T

[%]

85 80 75 70 65 60 55 50
50

400mA 450mA 500mA 550mA 600mA 650mA 700mA

60

70

80

[%]

90

100

PF

0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50
50

500mA 650mA

400mA 550mA 700mA

450mA 600mA

60

70

80

90

100

[%]

27 25 23 21 19 17 15 13 11 9 7 5
50

THD

550mA

400mA 600mA

450mA 650mA

500mA 700mA

60

70

80

90

100

[%]


110,000 100,000 90,000 80,000 70,000 60,000 50,000 40,000 30,000 20,000
30 35 40 45 50 55 60 65 70 75 80 85 90 (Tc)

SE-8-(400-700)-G1T

4

THD

IEEE1789

LowRisk)Modulation

f f 8Hz
8Hz< f 90Hz

% 0.2
0.025× f

90Hz< f 1250Hz

0.08× f

f >1250Hz

NoEffect)Modulation

f f 10Hz
10Hz< f 90Hz 90Hz< f 3125Hz
f >3125Hz

% 0.1
0.01× f 0.08/2.5)× f

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

0.1% 1% 5%
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

100.00%
10.00%
Modulation(%)
1.00%

100%0Hz0%

0.10% 1

10

100

1000

3125 10000

Frequency(Hz)

SE-8-(100-700)-G1T 385×245×160mm(L×W×H) 20PCS/5/100PCS/ 0.055kg/PC;5.5kg/

5

1. 2. I6

SE-8-100-G1T SE-8-300-G1T SE-8-500-G1T SE-8-150-G1T SE-8-350-G1T SE-8-550-G1T SE-8-200-G1T SE-8-400-G1T SE-8-600-G1T SE-8-250-G1T SE-8-450-G1T SE-8-650-G1T
SE-8-700-G1T

Triac/ELV

()

5
: :
; ; ; ; ;
1., 2.,

A0

20250307

183
6

www.ltech.cn

Documents / Resources

LTSYS SE-8 Series Intelligent LED Driver [pdf] User Manual
SE-8-100-G1T, SE-8-150-G1T, SE-8-200-G1T, SE-8-250-G1T, SE-8-300-G1T, SE-8-350-G1T, SE-8-400-G1T, SE-8-450-G1T, SE-8-500-G1T, SE-8-550-G1T, SE-8-600-G1T, SE-8-650-G1T, SE-8-700-G1T, SE-8 Series Intelligent LED Driver, SE-8 Series, Intelligent LED Driver, LED Driver, Driver

References

Leave a comment

Your email address will not be published. Required fields are marked *