Contents
hide
LTECH MT-100-800-D1N1 Ｎon-dimmable Constant Current Driver
Product Usage Instructions
Installation Guide
- Ensure the power source is turned off before installation.
- Connect the driver to the appropriate power source following the input voltage requirements.
- Make sure the output connections match the required voltage and current for your lamp.
- Install the driver in a suitable location based on the environmental conditions specified.
Dimming Instructions
To achieve smooth dimming without flicker:
- Use compatible dimmer switches recommended for use with this driver.
- Adjust the dimmer to the desired brightness level gradually to avoid sudden changes.
Maintenance
- Regularly inspect the driver for any signs of damage or overheating.
- Keep the driver clean and free from dust to ensure proper ventilation.
Frequently Asked Questions
Q: Does the driver come with a warranty?
A: Yes, the driver comes with a 5-year warranty for added peace of mind.
Q: Can the driver be used with non-standard housings?
A: It is recommended to use the driver with STUCCHI standard housings for optimal performance.
Q: Is the driver compatible with all types of lamps?
A: The driver is specially designed for magnetic and linear lamps, ensuring compatibility with these types.
Features
Ｎon-dimmable Constant Current Driver Special for magnetic & linear lamp
- No input polarity
- Multiple output current settings
- DC to DC constant current output
- Suitable for STUCCHI standard housings
- Magnetic installation is quiet without high-frequency sound
- Smooth dimming curves without flicker
- Overload, no-load, and anti-reverse protection
- 5-year warranty
Technical Specs
| MODEL | MT-100-800-D1N1 | |
| OUTPUT | Output Voltage | 9-46Vdc |
| Output Voltage Range | 12-48Vdc | |
| Output Current Range | 100-800mA | |
| Output Power | 0.9W-36.8W | |
| Channel | 1 | |
| INPUT | Input Voltage | 48Vdc±5% (No polarity) |
| Input Current | 0.74A | |
| Efficiency (Typ) | 94% | |
| Standby Power | <0.5W | |
| ENVIRONMENT | Working Temperature | ta: -30~60°C tc: 87°C |
| Storage Temperature | -40~80°C | |
| Working Humidity | 20~95%RH, non-condensing | |
| PROTECTION | Overload Protection | When it exceeds the output voltage, the current will drop and automatically recover after reducing the load. |
| Anti-reverse Protection | Prevent driver and load damage. | |
| OTHERS | Dimensions | L125×W14×H10mm |
| Weight（G.W.） | 15g±2g | |
Output Current Selection
- Please select the current through DIP switches on the circuit board when the power is off.
DIP switches quickly select current values from 100mA to 800mA. 
Dimensions
Unit: mm
Terminal Description
PCB board
Main view
Side view
Wiring Diagram
Attention
- Products shall be installed by qualified professionals.
- LTECH products are non-waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a waterproof enclosure.
- Good heat dissipation will extend the working life of products. Please ensure good ventilation.
- Please check if the working voltage used complies with the parameter requirements of the products.
- The diameter of the wire used must be able to load the light fixtures you connect and ensure the firm wiring.
- Before you power on products, please make sure all the wiring is correct in case of an incorrect connection that causes damage to light fixtures.
- If a fault occurs, please do not attempt to fix products by yourself. If you have any questions, please contact your suppliers.
- This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any questions.
Warranty Agreement
- Warranty periods from the date of delivery: 5 years.
- Free repair or replacement services for quality problems are provided within warranty periods.
Warranty exclusions below:
- Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law.
- TECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.
Update Log
| Version | Updated Time | Update Content | Updated by |
| A0 | 2021.06.10 | Original version | Xu Shujun |
| A1 | 2021.09.08 | Deleted the description of “Current Accuracy” on P1.Deleted the description of “The Output Current Accuracy of DIP Switches” on P1. | Xu Shujun |
| A2 | 2022.01.20 | Added “Output Voltage” to P1. | Xu Shujun |
| A3 | 2022.06.01 | Added “tc: 87 °C” to P1. | Xu Shujun |
Documents / Resources
 |
LTECH MT-100-800-D1N1 Ｎon-dimmable Constant Current Driver [pdf] Owner's Manual MT-100-800-D1N1 on Dimmable Constant Current Driver, MT-100-800-D1N1, on Dimmable Constant Current Driver, Dimmable Constant Current Driver, Constant Current Driver, Current Driver, Driver |
