LTECH E1 E Series Touch Panel
System Diagram
Product Features
- 2 in 1 function: RF wireless control and PWM power output.
- Power output, lamps can be connected directly, easy and convenient.
- Touch keys with chord and LED indicator.
- Adopt capacitive touch control technology on the full color circle that makes LED dimming selection more user-friendly.
- Touch panel can be controlled by remote directly or smart phone if adding a gateway.
Technical Specs
Installation Instructions
Product Size
Key Functions
When blue indicator light of key is on, long press to turn on/off the buzzer. When white indicator light of key is on, long press to match code.E series touch panel’s scene-mode keys are corresponding with WiFi gateway APP’s scene-mode, the scenes of panel can be changed by APP or panel.
E4S Mode
- Static red
- Static cyan
- 7 color gradient
- Static green
- Static white
- Static blue
- Static black
- RGB jumping
- Close RGB only
- Static yellow
- 7 color jumping
- Static purple
- RGB gradient
Scene-mode
Mode
- Red-green jumping
- Red-green gradient
- Green-blue jumping
- Green-blue gradient
- Red blue jumping
- Red blue gradient
- RGB jumping
- RGB gradient
- 7 color jumping
- 7 color gradient
System Diagram
PS: No WiFi router is needed when gateway work with phones directly.
Applications
RF Wireless Wiring
Single Zone Control
Multiple Zone Control
Touch panels can be sync controlled by multi remotes, please refer to the manual of remote’s usage.
Terminals
Wiring Diagram
E1: Connect with 12V strip. Max 48W/CHConnect with 24V strip. Max 96W/CH
E2: Connect with 12V strip. Max 48W for two routes.Connect with 24V strip. Max 96W for two routes.
E4/E4S: Connect with 12V strip. Max 36W/CH Connect with 24V strip. Max 72W/CH
E5S: Connect with 12V strip, RGB Max. 108W, CT Max. 36W Connect with 24V strip, RGB Max. 216W, CT Max. 72W
Match Code between Touch Panel & Remote
Please match/clear code when panel indicator light of On/Off is white.
- Long press on touch panel until indicator lights flash.
- Match code with F series remote: Single zone remote: long press ON/OFF key on remote, the indicator light stops flashing, match code successfully.Multi-zone remote: long press the matching zone’s ON & OFF keys simultaneously, the indicator light stops flashing, match code successfully.
- E1 touch panel match with F1/F5 remote, E2 match with F2/F6, E4/E4S match with F4/F8. Match code with Q series remote: long press the matching zone’s “ON” key on remote, the indicator lights of touch panel stop flicking, match successfully.
Match Code between Touch Panel & Gateway
Please match/clear code when panel indicator light of On/Off is white.
- Long press on touch panel until indicator lights flash.
- Turn on APP, enter “zone set” interface, click the right top “MATCH” key, then operate the following prompts.
Clear Code
Please match/clear code when panel indicator light of On/Off is white.
Press the bottom two keys on touch panel simultaneously for 6 seconds, the indicator light flashes several times, clear code successfully.
Warranty Agreement
Warranty periods from the date of delivery: 5 years
Free repair or replacement services for quality problems are provided within warranty periods.
Warranty exclusions below:
- Beyond warranty periods.
- Any artificial damage caused by high voltage, overload, or improper operations. Products with severe physical damage.
- Damage caused by natural disasters and force majeure.
- Warranty labels and barcodes have been damaged.
- No any contract signed by LTECH.
- Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law.
- LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.
Documents / Resources
 |
LTECH E1 E Series Touch Panel [pdf] User Manual E1, E2, E4, E4S, E5S, E Series Touch Panel |
