Overview
OLED display
8 bit / 16 bit
4 kinds of DMX interfaces
Dimming curve: 0.1-9.9
Short circuit / Over current / Overheat protection
D40
DMXS12 DCODER
Product introduction
1、Designed for Hi-power multiple channels application, 40 channels output, and Max. 3A current per
channel, up to 2880W output power.
2、The human-computer interaction interface is composed of an OLED screen and 3 buttons, which
displays rich content and is simple and fast to operate.
3、The number of DMX channels can be set to CH01/CH02/CH03/CH04/CH05/CH08/CH16/CH24/
CH32/CH40, which can realize independent address independent channel control, or one address
to control multiple channels.
4、The PWM frequency can be set to 300/600/1200/1500/1800/2400/3600/7200/10800/14400/
18000Hz;
5、3-pin XLR, 5-pin XLR, RJ45 and green terminal DMX interface with photoelectric isolation,
improve signal transmission efficiency and anti-interference ability, the green terminal also has
signal amplifier function.
6、With the operations can be completed via the RDM master console, such as parameters browsing
& settings, DMX address settings,equipment recognition, etc.
7、DMX master control mode；
8、With firmware upgrade function.
9、With short circuit, over current and over temp. protection, as well as warning function when a fault
occurs.
10、With power-on state management and fast self-testing function.
11、16bit (65536 levels) / 8bit (256 levels) grey level available.
12、Available for standard, linear, LOG or custom 0.1-9.9 dimming curve.
13、The device has 10 built-in personalized lighting effects. You can enter the setting interface of the
DMX master mode and select different lighting effects to achieve precise output control of other
decoders.
14、Parameters can be set and modified through the RDM master control or mobile phone APP,
eliminating the need for high-altitude operations.
Technical specs
| Model : | D40 |
| Input signal : | DMX512/RDM |
| Input voltage : | 12- 24Vdc |
| Current load : |
3A×40CH Max. 120A
|
| Output power : |
(0~36W…72W)×40CH Max. 2880W
|
| DMX interfaces : |
3-pin XLR, 5-pin XLR, RJ45, Green terminal
|
| Number of DMX channels : |
CH01, CH02, CH03, CH04, CH05, CH08, CH16, CH24, CH32, CH40
|
| Dimming curves : |
0.1~9.9, standard, linear, LOG
|
| Grey level : |
8bit (256 levels) / 16bit (65536 levels)
|
| Photoelectric isolation : | Yes |
| Protection： |
Short circuit / Overheat / Over current protection,recover automatically
|
| Working temperature : | -30℃-55℃ |
| Dimensions : |
L340×W122×H42.5mm
|
| Package size : |
L350×W149×H47.5mm
|
| Weight (G.W.): | 1220g |
Product size
Main component description
OLED screen interface
Wiring diagram
1. Connecting LED lights:
2. DMX Decoder Mode
D40 is equipped with DMX terminals for users’ selection. The following diagram takes 3-pin XLR as an
example, same connecting method for the rest three: Rj45 & 5-pin XLR & green terminal (with amplifier function).
Documents / Resources
 | D40 DMX512 Decoder |
References
- User Manualmanual.tools