LTECH 2293700 Q Remote Control Instruction Manual

Instruction Manual

Q Series Remote
For: Q1/Q2/Q4/Q5
Manual
www.ltech-led.cn

Contents hide

1 System Diagram

2 Product Introduction

7 Documents / Resources

7.1 References

8 Related Posts

System Diagram

Product Introduction

Q series remotes are 4-zone remotes with color changing and brightness dimming functions. Color and brightness can be displayed by indicator lights. Within the effective range, Q series remotes are capable of connecting unlimited wireless drivers and keeping the effects in sync. Remotes work with drivers F4-3A, F4-5A, F4-DMX-5A or F5- DMX-4A, also E series touch panels

Technical Specs

Remote Type: 4-zone control
Power Supply:2pack*AAA battery
Wireless Type: RF 2.4GH

WorkingTemp.: -20˚C ~55˚C
Package Size: L166×W47×H22(mm)
Weight(G.W.): 85

Dimension
Unit: mm

KeyFunctions

Mode
1. Static red2
4. Static yellow
7. Static white
10. RGB gradient

d2. Static green
5. Static purple
8. RGB jumping
11. 7 colors gradient

3. Static blue
6. Static cyan
9. 7 Colors of jumping
12. Static black(only turn off RGB)

KeyFunctions

Mode
1. Red-green jumping
4. RGB jumping
7. Green blue gradient
10. 7 Colors gradient

2. Green-blue jumping
5. 7 Colors of jumping
8. Red-blue gradient

3. Red-blue jumping
6. Red-green gradient
9. RGB gradient

Match Code

1. Q series remotes work with wireless drivers
Q1/ Q2/Q4 remote works with F4-3A, F4-5A, and F4-DMX-5A wireless drivers.
Q5 remote works with F5-DMX-4A, and EBOX-DMX wireless modules.
Method 1
I.1 Power off the wireless driver.
1.1.2 Hold down the” key on the remote for the pairing zone, and meanwhile power on the wireless driver. 1.1.3 The lamp of the wireless driver flashes several times and then stops flashing. You will hear a long beep as confirmation, then pair successfully.
Method 2
1.2.1 Short press the “ID learning button’ on the wireless driver and the lamp flashes, then please complete the next step within 15s. 1.2.2 Long press the ‘ON” key on the remote for the pairing zone.
1.2.3 The lamp of the wireless driver stops flashing, then pairs successfully.

2. Q series remotes work with panels
Q1 remote works with E1/E1S/EX1/EX1S/EX5 panel ;
Q2 remote works with E2/EX2/EX panel;
Q4 remote works with E3/E3S/E4/E4S/EX3/EX3S/EX4/EX4S/EX7/
EX7S/EX8/EX8S panel;
Q5 remote works with the E5S panel.
2.1 Long press
on the touch panel until the indic2. Q series remotes work with panels
Q1 remote works with E1/E1S/EX1/EX1S/EX5 panel ;
Q2 remote works with E2/EX2/EX panel;
Q4 remote works with E3/E3S/E4/E4S/EX3/EX3S/EX4/EX4S/EX7/
EX7S/EX8/EX8S panel;
Q5 remote works with the E5S panel.
2.1 Long press on the touch panel until the indicator light flashes,2. 2 Long press the “ON” key on the remote for the pairing zone until the indicator light of the touch panel stops flashing then pair successfully.

* Please match/clear code when the touch panel is power-on (the indicator light is white).
3. Match code between remotes ( Assuming that B pairs with AΟ )
3.1Short press the top two keys of remote B simultaneously, release them and the indicator light keeps on.

3.2 Press any key on remote A within 5s. When the indicator light of remote B puts out, pair successfully.
* Only the same model remotes can pair with each other.

Clear code
Press the top two keys on the remote simultaneously for about 6s. The indicator light flashes twice, then clears code successfully.

Wiring Diagram

Remote works with wireless drivers	Remote works with E series touch panels

* This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any questions. www.havit.com.au