Horner Automation is a global leader in designing and manufacturing all-in-one industrial controllers, touchscreens, and connected automation solutions.
Horner Automation (also known as Horner APG) is a leading global manufacturer of industrial automation and control solutions. They are widely recognized for pioneering the all-in-one controller, often referred to as an OCS (Operator Control Station), which combines a PLC, HMIs, and I/O into a single cohesive unit.
The HORNER product line includes advanced touchscreens, modular controllers, remote and expansion I/O units, and automation software like Cscape. Whether you are performing a firmware update on a Canvas Series Touchscreen or setting up an XL4 Prime controller, you can find the technical instructions and user guides below.
Naujausi vadovai iš manuals+ šiam prekės ženklui kuruota.
Dažniausiai užduodami klausimai apie šio prekės ženklo vadovus, registraciją ir palaikymą.
Firmware can typically be updated using a bootable microSD card, USB flash drive, or via an RS232/Mini USB connection depending on your specific model. Always ensure the controlled equipment is in a safe, non-operational state before beginning.
Horner OCS controllers are programmed using Cscape software, which provides logic, HMI design, and networking configuration in a single environment.
To check the firmware revision, navigate to the System Menu on your controller and select 'View Status'. The current version numbers will be displayed on the screen.
Firmware updates can be downloaded from the official Horner Automation website under Support > Downloads > Controller Firmware.