Canon EOS 650

Canon EOS 650 35MM SLR Film Camera Body Instruction Manual

Model: EOS 650

1. Įvadas

This manual provides essential instructions for the proper setup, operation, and maintenance of your Canon EOS 650 35MM SLR Film Camera Body. Please read this manual thoroughly before using the camera to ensure optimal performance and longevity.

2. Sąranka

2.1 Akumuliatoriaus įdėjimas

The Canon EOS 650 requires one 6V 2CR5 lithium battery. To install:

  1. Raskite baterijų skyriaus dangtelį ant fotoaparato korpuso.
  2. Open the cover by sliding or pressing the release latch.
  3. Insert the 2CR5 battery, ensuring the correct polarity as indicated inside the compartment.
  4. Tvirtai uždarykite baterijų skyriaus dangtelį, kol jis spragtelėdamas užsifiksuos vietoje.

2.2 Plėvelės įkėlimas

The camera features automatic film loading. Follow these steps:

  1. Open the camera back by sliding the release latch.
  2. Place a 35mm film cassette into the film chamber.
  3. Pull the film leader across to the orange mark on the take-up spool.
  4. Close the camera back firmly. The camera will automatically advance the film to the first frame. The frame counter will display '1'.

2.3 Objektyvo tvirtinimas

The EOS 650 uses an EF mount. To attach a compatible EF lens:

  1. Nuimkite korpuso dangtelį nuo fotoaparato ir galinį dangtelį nuo objektyvo.
  2. Suderinkite raudoną indekso žymę ant objektyvo su raudonu indekso žyme ant fotoaparato korpuso.
  3. Sukite objektyvą pagal laikrodžio rodyklę, kol jis užsifiksuos vietoje.
Canon EOS 650 35MM SLR Film Camera Body

An image showing the Canon EOS 650 35MM SLR film camera body from the front-right angle, highlighting its compact design and lens mount.

3. Naudojimo instrukcijos

3.1 Maitinimo įjungimas/išjungimas

Locate the main power switch, typically near the shutter button. Slide it to the 'ON' position to power on the camera. Slide it to 'OFF' when not in use to conserve battery life.

3.2 Viewieškiklis Informacija

Kai žiūri pro viewfinder, you will see:

3.3 External LCD Display

The external LCD panel displays critical information such as:

3.4 Fotografavimo režimai

The EOS 650 offers various exposure control modes:

3.5 Automatinio fokusavimo sistema

The camera uses a TTL phase detection AF system with two modes:

3.6 Film Advance and Rewind

After each shot, the film automatically advances. You can select film advance modes:

When the film roll is complete, the camera will automatically rewind the film into the cassette. Midroll rewind is also possible by pressing the designated rewind button.

4. Priežiūra

4.1 Kameros valymas

To maintain your camera's performance:

4.2 Saugykla

Kai nenaudojate fotoaparato, laikykite jį vėsioje, sausoje vietoje, toliau nuo tiesioginių saulės spindulių ir ekstremalių temperatūrų. Jei fotoaparatas bus nenaudojamas ilgesnį laiką, išimkite bateriją.

5. Problemų sprendimas

If you encounter issues with your Canon EOS 650, refer to the following common problems and solutions:

ProblemaGalima priežastis / sprendimas
Kamera neįsijungia.Patikrinkite akumuliatoriaus įdėjimą ir įsitikinkite, kad akumuliatoriaus įkrova pakankama. Jei reikia, pakeiskite.
Filmas nejuda į priekį.Ensure film is correctly loaded and the camera back is securely closed. Check if the film leader is properly engaged.
Automatinis fokusavimas neveikia.Ensure the lens is securely attached and the AF/MF switch on the lens is set to AF. Check for sufficient light and contrast in the subject.
Exposure seems incorrect.Verify the selected shooting mode and exposure compensation settings. Ensure the film ISO is correctly set (if manual).
Užraktas neatleidžiamas.Check if the film is fully advanced. If in One-Shot AF mode, ensure focus is achieved. Battery may be low.

6. Specifikacijos

Detailed technical specifications for the Canon EOS 650 camera body:

7. Garantija ir palaikymas

As this is a renewed product, warranty terms may vary. Please refer to the specific warranty information provided at the time of purchase or contact the seller, Blue Penn Refurbished, for details regarding your product's warranty and support options.