ARIEL ARL-PW1685959CW1-P 61-inch Trapezoid Whirlpool Bathtub User Manual

1. Įvadas

This manual provides detailed instructions for the installation, operation, and maintenance of your ARIEL 61-inch Trapezoid Whirlpool Bathtub. Please read this manual thoroughly before installation and use to ensure safe and efficient operation. Retain this manual for future reference.

The ARIEL Trapezoid Whirlpool Bathtub is designed to provide a luxurious bathing experience with its advanced hydro-massage system, featuring 14 multi-directional jets, air bubble jets, and a waterfall faucet, all controlled by an intuitive pneumatic system.

2. Saugos informacija

ĮSPĖJIMAS: Siekdami sumažinti susižalojimo riziką, neleiskite vaikams naudoti šio gaminio, nebent jie visą laiką yra atidžiai prižiūrimi.

WARNING: Do not operate this product without the suction cover properly installed to prevent hair or body entrapment.

WARNING: Persons with medical conditions such as heart disease, high blood pressure, diabetes, or those who are pregnant should consult a physician before using this product.

• Visada įsitikinkite, kad vonia yra tinkamai įžeminta pagal vietinius elektros kodeksus.
• Do not use electrical appliances near the bathtub.
• Maintain water temperature below 104°F (40°C) to avoid hyperthermia.
• Venkite naudoti abrazyvinius valiklius ar aštrius daiktus, kurie gali pažeisti akrilo paviršių.
• Kad vonios kambaryje nesikauptų drėgmė, užtikrinkite tinkamą vėdinimą.
• Do not block the air intake or water circulation openings.

3. Produktas baigtasview ir komponentai

The ARIEL Trapezoid Whirlpool Bathtub is equipped with various features for a complete hydro-massage experience. Familiarize yourself with the components before installation and operation.

Figure 3.1: Bathtub Component Diagram. This diagram illustrates the various parts of the ARIEL Trapezoid Whirlpool Bathtub, including jets, controls, and fixtures.

• Hydro Jets: 14 multi-directional jets for targeted massage.
• Air Bubble Jets: Provide a gentle, effervescent massage.
• Pneumatic Controls: Simple push-button system for operating jets and water flow.
• Waterfall Faucet: Delivers water for rapid filling and aesthetic appeal.
• Rankinis dušas: For focused rinsing and convenience.
• Anti-Scald Faucet Valve: Maintains consistent water temperature for safety.
• Dual Head Cushions: Removable for ergonomic comfort.
• Grūdinto stiklo plokštė: 5mm thick, integrated into the front design.

Figure 3.2: Hand Shower and Controls. Išsamią view of the chrome hand shower and the intuitive pneumatic push-button controls.

Figure 3.3: Waterfall Faucet. The integrated waterfall faucet provides a continuous flow of water for filling the tub.

4. Montavimo instrukcijos

This bathtub is designed for floor-mounted installation. Professional installation by a licensed plumber and electrician is highly recommended to ensure compliance with local codes and safety standards.

4.1 Kontrolinis sąrašas prieš įdiegiant

• Patikrinkite, ar visi komponentai yra ir nepažeisti.
• Ensure the installation area is level and structurally sound to support the weight of the filled tub and occupants (approximately 190 lbs dry weight + 92 gallons water * 8.34 lbs/gallon = ~767 lbs water + occupants).
• Confirm access to hot and cold water supply lines.
• Ensure a properly grounded electrical outlet (110V/60Hz/15A) is available for the water pump.
• Provide adequate drainage according to local plumbing codes.
• Plan for an access panel to the tub's internal components for future maintenance.

4.2 Santechnikos jungtys

1. Connect the hot and cold water supply lines to the inlet faucets. Ensure all connections are watertight.
2. Connect the flexible drain hose to the main drain line. Verify a secure and leak-free connection.
3. Test all plumbing connections for leaks before proceeding.

4.3 Elektros jungtys

1. Connect the water pump's power cord to a dedicated, grounded 110V/60Hz/15A GFCI-protected electrical outlet.
2. Įsitikinkite, kad visus elektros prijungimus atlieka kvalifikuotas elektrikas ir kad jie atitinka vietinius elektros kodeksus.

4.4 Final Placement

1. Carefully position the bathtub in its final location.
2. Ensure the tub is level and stable. Adjust leveling feet if necessary.
3. Install any decorative panels or trim, ensuring access to plumbing and electrical components remains possible.

Figure 4.1: Bathtub Dimensions. This technical drawing provides precise measurements for planning your installation space.

5. Naudojimo instrukcijos

Your ARIEL whirlpool bathtub features user-friendly pneumatic controls for a relaxing experience.

5.1 Vonios pripildymas

1. Įsitikinkite, kad kanalizacija uždaryta.
2. Turn on the hot and cold water supply to achieve your desired temperature. The anti-scald faucet valve will help maintain a consistent temperature.
3. The waterfall faucet delivers water at up to 3.7 gallons per minute. Fill the tub to a level that covers the jets, but do not overfill.

5.2 Activating Hydro-Massage Functions

• Hydro Jets: Press the pneumatic button labeled for "Jets" to activate the 14 multi-directional hydro jets. Press again to turn off.
• Air Bubble Jets: Press the pneumatic button labeled for "Air Bubbles" to activate the air bubble massage. Press again to turn off.
• Adjusting Jet Intensity: Some jets may have adjustable nozzles. Rotate the outer ring of the jet to change the direction of the water flow.
• Rankinis dušas: To use the hand shower, pull the diverter knob located near the main faucet. The hand shower offers multiple spray modes.

Pastaba: Do not operate the hydro jets or air bubble jets if the water level is below the jet openings, as this can damage the pump.

6. Priežiūra

Regular maintenance will ensure the longevity and optimal performance of your ARIEL whirlpool bathtub.

6.1 Cleaning the Bathtub Surface

• Clean the acrylic surface with a soft cloth and a non-abrasive, mild bathroom cleaner.
• Avoid cleaners containing ammonia, acetone, or harsh chemicals, as these can damage the acrylic finish.
• Po valymo kruopščiai nuplaukite švariu vandeniu.

6.2 Purkštukų sistemos valymas

1. Fill the tub with warm water to a level above the highest jets.
2. Add 2-3 tablespoons of a low-foaming dishwasher detergent or a specialized jet cleaner.
3. Run the hydro jets for 10-15 minutes.
4. Drain the tub, then refill with clean water and run the jets for another 5 minutes to rinse.
5. Repeat this process monthly or as needed, especially after heavy use.

6.3 Kanalizacijos priežiūra

• Regularly remove hair and debris from the drain cover to prevent clogs.
• If a clog occurs, use a plumbing snake or a chemical drain cleaner specifically designed for bathtubs, following product instructions carefully.

7. Problemų sprendimas

This section addresses common issues you might encounter with your whirlpool bathtub.

8. Specifikacijos

9. Garantija ir palaikymas

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official ARIEL websvetainėje. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą bet kokiems garantiniams prašymams.

If you require technical assistance or have questions regarding your ARIEL whirlpool bathtub, please contact ARIEL customer service.

Internetiniai ištekliai: Visit the ARIEL Store on Amazon