SMART SENSOR Elite Programming/Diagnostic Tool User Manual

1. Įvadas

The SMART SENSOR Elite Programming/Diagnostic Tool is designed to simplify the process of diagnosing failed sensors, programming new Smart Sensors, and performing vehicle relearns.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Elite tool and associated components.

1 paveikslas: The SMART SENSOR Elite Programming/Diagnostic Tool kit. This image displays the black, textured carrying case for the Elite diagnostic tool, along with two boxes of "SMART Sensor ONE" multi-frequency programmable universal TPMS sensors (each box containing 10 sensors) and several metal valve stems. A smaller box of sensors is also visible.

2. Sąranka

2.1 Išpakavimas ir pirminė apžiūra

• Atsargiai atidarykite pakuotę ir išimkite visus komponentus.
• Verify that all items are present: Elite Programming/Diagnostic Tool (in case), 20 Smart Sensors, 4 Metal Stems, OBDII Cable, and Magnet.
• Inspect all components for any signs of damage. If any items are damaged or missing, contact customer support immediately.

2.2 Powering On the Tool

1. Ensure the Elite tool's internal battery is sufficiently charged. If not, connect the provided charging cable to a suitable power source.
2. Paspauskite ir palaikykite nuspaudę įrenginio maitinimo mygtuką, kol ekranas įsijungs.
3. Vykdykite visus ekrane pateikiamus nurodymus, kad atliktumėte pradinę sąranką, pvz., pasirinktumėte kalbą arba nustatytumėte datą / laiką.

2.3 Connecting the OBDII Cable

• Locate the OBDII port in the vehicle (typically under the dashboard on the driver's side).
• Connect one end of the provided OBDII cable to the Elite tool and the other end to the vehicle's OBDII port.
• Ensure a secure connection at both ends.

3. Naudojimo instrukcijos

3.1 Diagnosing Failed Sensors

1. With the tool connected to the vehicle, navigate to the "Diagnosis" or "Sensor Test" menu on the Elite tool.
2. Select the vehicle make, model, and year as prompted.
3. Follow the on-screen instructions to trigger each TPMS sensor. This may involve holding the tool near each tire's valve stem.
4. The tool will display sensor ID, pressure, temperature, and battery status, indicating if a sensor is faulty.

3.2 Programming New Smart Sensors

The Elite tool supports programming of new SMART SENSOR multi-frequency universal TPMS sensors.

1. From the main menu, select "Program Sensor" or "Create Sensor".
2. Choose the programming method:
   • Kopijuoti aktyvinant: Activate the original sensor to read its ID, then program the new sensor with that ID.
   • Copy by Manual Input: Manually enter the original sensor's ID.
   • Automatinis kūrimas: Generate a new, unique sensor ID for the vehicle.
3. Place the new SMART SENSOR near the tool's programming area.
4. Confirm the programming process on the tool.

3.3 Performing Vehicle Relearns

After replacing or programming TPMS sensors, the vehicle's ECU must be updated to recognize the new sensor IDs.

1. Navigate to the "Relearn" menu on the Elite tool.
2. Select the vehicle make, model, and year.
3. Follow the specific relearn procedure displayed on the tool. Procedures vary by vehicle and may include:
   • OBDII Relearn: The tool communicates directly with the vehicle's ECU via the OBDII port.
   • Automatinis pakartotinis mokymasis: Driving the vehicle for a certain period.
   • Manual Relearn: A sequence of steps performed using the vehicle's dashboard controls.
4. Confirm successful relearn on the tool and vehicle dashboard.

3.4 Using the Magnet

The included magnet may be used for certain vehicle-specific relearn procedures that require a magnetic trigger for the TPMS sensors. Refer to the vehicle's service manual or the Elite tool's on-screen instructions for specific applications.

4. Priežiūra

4.1 Įrankio valymas

• Wipe the Elite tool and its accessories with a soft, dry cloth.
• Pritvirtinusius nešvarumus naudokite šiek tiek damp šluoste su švelniu muilu, tada gerai išdžiovinkite.
• Do not use abrasive cleaners or solvents, as these can damage the tool's casing arba ekranas.

4.2 Saugykla

• Store the Elite tool and all components in the provided protective case when not in use.
• Keep the case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure sensors are stored in their original packaging or a suitable container to prevent damage.

4.3 Akumuliatoriaus priežiūra

• Charge the tool's internal battery regularly, even if not in frequent use, to maintain battery health.
• Prieš įkrovimą venkite visiškai iškrauti bateriją.
• If the tool will not be used for an extended period, charge it to approximately 50% before storage.

5. Problemų sprendimas

Jei susiduriate su čia nepaminėtomis problemomis arba jei siūlomi sprendimai problemos neišsprendžia, daugiau pagalbos ieškokite pagalbos skyriuje.

6. Specifikacijos

7. Informacija apie garantiją

Specific warranty terms and conditions for the SMART SENSOR Elite Programming/Diagnostic Tool are typically provided with the product at the time of purchase or can be found on the manufacturer's official websvetainėje. Prašome išsaugoti pirkimo įrodymą garantiniams reikalavimams.

Norėdami gauti išsamios informacijos apie garantiją, apsilankykite SMART SENSOR official websvetainę arba susisiekite su jų klientų aptarnavimo tarnyba.

8. Pagalba klientams

For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact SMART SENSOR customer support.

Contact information (phone, email, or support portal) is usually available on the product packaging, the manufacturer's official websvetainėje arba per pirkimo vietą.

Internetiniai ištekliai: For the most up-to-date information, software updates, and additional resources, please visit the SMART SENSOR official websvetainę.