PHILIPS 12362DVS2

Philips Diamond Vision H11 Halogen Headlight Bulbs - Instruction Manual

Model: 12362DVS2 | Brand: PHILIPS

1. Įvadas

Thank you for choosing Philips Diamond Vision H11 Halogen Headlight Bulbs. These bulbs are designed to provide a distinctively white light with a color temperature of 5000K, enhancing the aesthetic of your vehicle's lighting. This manual provides essential information for the safe and effective installation, operation, and maintenance of your new headlight bulbs.

Philips Diamond Vision H11 Halogen Headlight Bulb packaging

Figure 1: Philips Diamond Vision H11 Halogen Headlight Bulb (Pair)

2. Sąranka ir diegimas

Proper installation is crucial for optimal performance and safety. Always ensure your vehicle is turned off and cooled down before beginning installation. It is recommended to replace both headlight bulbs simultaneously to ensure consistent light output and lifespan.

2.1. Prieš pradėdami

  • Patikrinkite lemputės tipą: Confirm that your vehicle uses H11 bulb type. Refer to your vehicle's owner's manual for correct bulb specifications.
  • Pirmiausia sauga: Wear protective gloves to avoid touching the glass part of the bulb. Oils from your skin can create hot spots, reducing bulb lifespan.
  • Įrankiai: No special tools are typically required, but a flathead screwdriver or trim removal tool may be helpful for accessing the headlight assembly.

2.2. Diegimo žingsniai

  1. Priekinio žibinto mazgas: Open your vehicle's hood. Locate the back of the headlight assembly. Depending on your vehicle model, you may need to remove a cover or move other components to gain access.
  2. Atjunkite laidus: Carefully disconnect the electrical connector from the back of the old bulb. This usually involves pressing a tab and pulling.
  3. Pašalinti seną lemputę: Twist the old H11 bulb counter-clockwise to unlock it from the housing, then gently pull it straight out.
  4. Įdėkite naują lemputę: Holding the new Philips Diamond Vision H11 bulb by its base (avoiding the glass), align the tabs on the bulb with the slots in the headlight housing. Insert the bulb and twist clockwise until it locks securely into place.
  5. Prijunkite laidus iš naujo: Prijunkite elektros jungtį prie naujos lemputės, kol išgirsite arba pajusite spragtelėjimą, užtikrindami patikimą jungtį.
  6. Bandymo funkcionalumas: Turn on your vehicle's headlights to ensure both new bulbs are functioning correctly before closing the hood.

Video 1: Demonstration of Philips Diamond Vision H11 bulbs installed in a 2017 Camry SE, showcasing their light output.

Video 2: Short video illustrating the simple 'plug and play' installation of the Philips Diamond Vision H11 headlight bulb.

3. Naudojimo instrukcijos

Philips Diamond Vision H11 bulbs provide a super white light with a color temperature of 5000K. While designed to offer a distinct look, please note that these bulbs are not as bright as standard OEM bulbs and are not HID bulbs. Their primary benefit is the unique white light appearance.

  • Always use your headlights in accordance with local traffic laws and conditions.
  • Ensure your headlight aim is correctly adjusted after installation to prevent blinding oncoming drivers and to maximize your visibility.

4. Priežiūra

To ensure the longevity and optimal performance of your Philips Diamond Vision H11 bulbs, follow these maintenance tips:

  • Reguliarus valymas: Keep your headlight lenses clean from dirt, debris, and oxidation. Use a soft cloth and appropriate automotive cleaning solutions.
  • Vizuali apžiūra: Periodically check your bulbs for any signs of dimming or discoloration. Replace bulbs in pairs for consistent performance.
  • Venkite liesti stiklo: When handling bulbs, always use gloves or a clean cloth to avoid transferring oils to the glass, which can shorten bulb life.

5. Problemų sprendimas

If you encounter issues with your Philips Diamond Vision H11 bulbs, consider the following:

  • Lemputė nedega:
    • Patikrinkite elektros jungtį, kad įsitikintumėte, jog ji tvirtai pritvirtinta.
    • Verify the bulb is correctly seated and locked into the headlight housing.
    • Inspect your vehicle's fuse box for a blown headlight fuse.
  • Dimmer than Expected: These bulbs are designed for a 5000K super white appearance and are noted to be dimmer than standard OEM bulbs. This is a characteristic of the product.
  • Spalvos variacija: The color temperature is 5000K, which is a super white light. Some users may perceive a slight blue tint depending on the headlight assembly and individual perception.
  • Trumpa gyvenimo trukmė: Ensure the glass part of the bulb was not touched during installation. Oils from skin can significantly reduce bulb life.

6. Specifikacijos

FunkcijaSpecifikacija
Prekės ženklasPhilips
Modelio numeris12362DVS2
Lemputės tipasH11 halogenas
Spalvos temperatūra5000 Kelvin (Super White)
Vattage55 vatų
ttage12 voltų
Prekės svoris7.1 uncijos
Gaminio matmenys2.13 x 4.13 x 5.16 colio

7. Garantija ir palaikymas

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Philips Automotive Lighting website. Always retain your proof of purchase for any warranty claims.

Susiję dokumentai - 12362DVS2

Preview „Philips Ultinon Pro LED-HL“ automobilių lempučių montavimo vadovas
Išsamus „Philips Ultinon Pro LED-HL“ automobilių priekinių žibintų lempučių montavimo vadovas, kuriame aprašomi įvairūs lempučių tipai ir svarbiausios naudojimo atsargumo priemonės.
Preview „Philips Ultinon LED-HL“ automobilio priekinių žibintų montavimo vadovas
Žingsnis po žingsnio „Philips Ultinon LED-HL“ automobilių priekinių žibintų, apimančių H4, H7, H11, HB3/4 ir HIR2 lempučių tipus, montavimo instrukcijos. Optimaliam veikimui užtikrinti įsitikinkite, kad lemputės tinkamai sumontuotos.
Preview „Philips Ultinon Pro H7 LED“ priekinių žibintų lemputės montavimo ir saugos vadovas
Išsamus „Philips Ultinon Pro H7-LED“ priekinių žibintų lempučių montavimo vadovas, kuriame aptariamos montavimo galimybės, saugos priemonės, ABG sertifikato reikalavimai ir suderinamumo patikros su įvairiais transporto priemonių tipais.
Preview „Philips Ultinon Pro7000 SI“ LED festono lemputė: patobulintas vidaus apšvietimas
Atraskite „Philips Ultinon Pro7000 SI“ LED festono tipo lemputes (LUM11860CU70X1/20) savo automobiliui. Šios lemputės, pasižyminčios puikiu ryškumu (6000 K), tolygiu šviesos pasiskirstymu ir 5,000 valandų tarnavimo laiku, padidina vairavimo saugumą ir salono stilių, nes jas lengva įdiegti ir naudoti.
Preview „Philips Ultinon Pro H4 LED“ priekinių žibintų lemputės montavimo ir saugos vadovas
Išsamus „Philips Ultinon Pro H4-LED“ priekinių žibintų lempučių montavimo ir naudojimo vadovas, įskaitant montavimo parinktis, suderinamumą su CANbus, saugos priemones ir atitiktį teisiniams dokumentams.
Preview „Philips“ priekinių žibintų restauravimo rinkinys – naudotojo vadovas ir saugos vadovas
Išsamios instrukcijos ir saugos įspėjimai, kaip naudoti „Philips“ priekinių žibintų restauravimo rinkinį, kad būtų atkurtas išblukusių, oksiduotų ar pageltusių plastikinių priekinių žibintų lęšių skaidrumas ir išvaizda. Pateikiamos nuoseklios instrukcijos ir informacija apie produktą.