Tamiya LP-43 Pearl White Lacquer Paint 10ml User Manual

1. Įvadas

This manual provides essential information for the safe and effective use of Tamiya LP-43 Pearl White Lacquer Paint. This high-quality lacquer paint is designed for model building and various craft applications, offering a durable and vibrant finish. Please read all instructions carefully before use.

2. Saugos informacija

WARNING: FLAMMABLE LIQUID AND VAPOR. HARMFUL IF SWALLOWED. MAY CAUSE RESPIRATORY TRACT IRRITATION. USE IN A WELL-VENTILATED AREA.

• Laikyti vaikams nepasiekiamoje vietoje.
• Use only in a well-ventilated area or outdoors. Avoid breathing vapors.
• Dėvėkite tinkamas asmenines apsaugos priemones, įskaitant pirštines ir akių apsaugą.
• Laikyti atokiai nuo karščio, karštų paviršių, kibirkščių, atviros liepsnos ir kitų uždegimo šaltinių. Nerūkyti.
• Nenuryti. Prarijus, nedelsiant kreiptis į gydytoją.
• In case of contact with eyes, rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Store in a cool, dry place. Keep container tightly closed.
• Turinį / talpyklą išmeskite pagal vietines taisykles.

3. Produkto aprašymas

Tamiya LP-43 is a premium lacquer paint formulated to provide excellent coverage and a smooth, durable finish. This specific variant is a Pearl White color, offering a shimmery effect suitable for detailed model work and other artistic projects.

• Prekinis ženklas: TAMIYA
• Spalva: Pearl White
• Apdailos tipas: Shimmery
• Prekės tūris: 10 mililitrų (0.34 skysčio uncijos)
• Dažų tipas: Lakas
• Specifiniai naudojimo būdai: Interior/Exterior model painting and crafts
• Atsparumas vandeniui: Atstumiantis vandenį

4. Pasiruošimas (sąranka)

1. Vėdinimas: Ensure the work area is well-ventilated. Open windows or use an exhaust fan.
2. Paviršiaus paruošimas:
   • The surface to be painted must be clean, dry, and free of dust, grease, and other contaminants.
   • For best results, prime the surface with a suitable primer before applying the lacquer paint.
   • Lightly sand smooth surfaces for better adhesion, then clean thoroughly.
3. Dažų paruošimas:
   • Shake the paint bottle thoroughly for at least one minute to ensure the pigments are evenly mixed. Listen for the mixing ball inside.
   • If thinning is required for airbrushing, use Tamiya Lacquer Thinner (sold separately). Refer to the thinner's instructions for appropriate mixing ratios.
4. Įrankiai: Prepare your chosen application tools, such as brushes or an airbrush, ensuring they are clean and ready for use.

5. Taikymas (veikiantis)

Apply the paint in thin, even coats for optimal results. Multiple thin coats are preferable to one thick coat.

5.1. Brush Application

1. Dip a clean brush into the paint, removing excess paint to prevent drips.
2. Apply the paint smoothly and evenly over the prepared surface.
3. Allow each coat to dry completely before applying subsequent coats. Drying time may vary depending on humidity and temperature.

5.2. Airbrush Application

1. Thin the lacquer paint with Tamiya Lacquer Thinner to a milky consistency suitable for your airbrush. A common ratio is 1 part paint to 1-2 parts thinner, but test on a scrap piece first.
2. Set your airbrush pressure according to the thinner's instructions and your equipment.
3. Apply paint in light, even passes, maintaining a consistent distance from the surface.
4. Allow flash-off time between coats to prevent pooling and ensure a smooth finish.
5. For a deeper pearl effect, multiple thin coats are recommended.

6. Cleaning and Storage (Maintenance)

6.1. Cleaning Tools

• Clean brushes and airbrush equipment immediately after use with Tamiya Lacquer Thinner or a suitable lacquer-based cleaner.
• Do not allow paint to dry on tools, as it will be difficult to remove.
• Rinse tools thoroughly until all paint residue is gone.

6.2. Sandėliavimas

• Ensure the paint bottle cap is tightly sealed after each use to prevent drying and solvent evaporation.
• Store the paint in a cool, dry, and well-ventilated area, away from direct sunlight and heat sources.
• Keep the paint upright to prevent leaks.

7. Problemų sprendimas

• Problema: Paint appears too thick or clumpy.
  Sprendimas: Shake the bottle more thoroughly. If airbrushing, thin with Tamiya Lacquer Thinner.
• Problema: Poor adhesion or peeling paint.
  Sprendimas: Ensure the surface was properly cleaned and primed. Lightly sand the surface for better mechanical adhesion.
• Problema: Uneven finish or brush marks.
  Sprendimas: Apply thinner coats. For brush application, use a high-quality brush and avoid overworking the paint. For airbrushing, adjust pressure and distance.
• Problema: Paint drying too quickly or too slowly.
  Sprendimas: Adjust environmental conditions (temperature, humidity). Ensure proper ventilation.

8. Specifikacijos

9. Garantija ir palaikymas

Information regarding specific warranty terms for Tamiya LP-43 Pearl White Lacquer Paint is not provided in the product details. For warranty inquiries or technical support, please contact Tamiya customer service directly or refer to their official websvetainę.

Gamintojas: Tamija

Dalies numeris: 300082143