Įvadas
Behringer Vintage Tube Overdrive TO800 is an effects pedal designed to deliver classic tube-like overdrive tones. It captures the nuances of your playing, providing everything from smooth overdrive to screaming tube sounds. This manual provides essential information for setting up, operating, and maintaining your TO800 pedal.
1 pav.: Iš viršaus į apačią view of the Behringer Vintage Tube Overdrive TO800 pedal, showing the footswitch and control knobs.
Sąranka
Maitinimo šaltinis
The TO800 pedal can be powered by a 9V battery or an optional 9V DC power adapter (not included). Ensure the power supply meets the pedal's requirements to prevent damage.
- Akumuliatoriaus montavimas: To install a 9V battery, press the rear part of the footswitch down and lift the front part of the pedal. Connect the 9V battery to the clip and place it inside the compartment.
- Kintamosios srovės adapteris: Connect a 9V DC power adapter to the DC IN jack on the pedal.
Jungtys
Connect your guitar to the INPUT jack and your amplifier to the OUTPUT jack using standard 1/4-inch (6.35mm) audio cables.
2 pav.: šonas view of the TO800 pedal, highlighting the input and output jacks for connecting to your instrument and ampgyvesnis.
Pedalo valdymas
The TO800 features dedicated controls for DRIVE, TONE, and LEVEL, allowing for extensive sound shaping.
- PAVARAS: Adjusts the amount of overdrive or distortion. Turn clockwise for more aggressive, saturated tones.
- TONAS: Controls the overall tonal character, from mellow (LO) to bright (HI). This allows you to fine-tune the high-end response.
- LYGIS: Sets the output volume of the effect. Use this to balance the effect's volume with your bypassed signal or to boost your signal.
- ĮJUNGIMO/BATTO LED: This LED indicates when the effect is active and also serves as a battery check. If the LED is dim or does not light up when the effect is engaged, the battery needs to be replaced.
- Kojinis jungiklis: Engages or bypasses the effect. The pedal features true bypass for signal integrity when disengaged.
Figure 3: Close-up of the TO800 pedal's control knobs (Drive, Tone, Level) and the footswitch, which activates the effect and features an ON/BATT LED.
Video 1: A seller demonstrates the Behringer Vintage Tube Overdrive TO800 pedal, highlighting its sound and features. This video shows the pedal in action, providing an auditory example of its capabilities.
Priežiūra
To ensure the longevity and optimal performance of your TO800 pedal, follow these maintenance guidelines:
- Pedalą valykite minkštu, sausu skudurėliu. Venkite naudoti abrazyvinius valiklius ar tirpiklius.
- Pedalą laikykite sausoje vietoje, atokiau nuo ekstremalių temperatūrų ir drėgmės.
- When not in use for extended periods, remove the 9V battery to prevent leakage and potential damage to the internal circuitry.
Trikčių šalinimas
If you encounter issues with your TO800 pedal, refer to the following common troubleshooting steps:
- Nėra garso:
- Patikrinkite visas kabelių jungtis (gitaros įvestį, išvesties į amp). Ensure they are securely plugged in.
- Verify the power supply. If using a battery, check if it's fresh. If using an adapter, ensure it's the correct voltage (9V DC) and polarity.
- Išbandykite su skirtingais laidais, gitara ir ampgelbėtojas problemai izoliuoti.
- Nepageidaujamas triukšmas / ūžesys:
- Įsitikinkite, kad naudojate reguliuojamą 9 V nuolatinės srovės maitinimo šaltinį. Nereguliuojami maitinimo šaltiniai gali skleisti triukšmą.
- Patikrinkite, ar nėra pažeistų kabelių.
- Perkelkite pedalą toliau nuo kitų elektroninių prietaisų, kurie gali sukelti trikdžius.
- Efektas neįtraukiantis:
- Check the ON/BATT LED. If it's off or dim, replace the battery or check the power adapter.
- Ensure the footswitch is functioning correctly.
Specifikacijos
| Funkcija | Specifikacija |
|---|---|
| Prekės modelio numeris | IKI 800 |
| Prekės svoris | 14.1 uncijos |
| Gaminio matmenys | 6.45 x 3.6 x 2.5 colio |
| Baterijos | Reikalinga 1x9V baterija |
| Korpuso Medžiaga | Metalas |
| Spalvos pavadinimas | Laimo žalia |
| Jungties tipas | 1/4 colio (6.35 mm) garso lizdas |
| Techninės įrangos sąsaja | 1/4 colio garsas |
| Signalo formatas | Analoginis |
| Maitinimo šaltinis | Laidinis elektrinis (9 V nuolatinės srovės adapteris) |
Garantija ir palaikymas
For warranty information, technical support, or service inquiries, please refer to the official Behringer websvetainėje arba susisiekite su vietiniu platintoju. Išsaugokite pirkimo kvitą kaip pirkimo įrodymą.
