LPG SYSTEMS SAS TVE1328R Tablet
Specifications
| 13″3 Tablet | ||
| Model# | TVE1328R | |
| CPU | Rockchip RK3588s Octa-Core A76 2.4G + A55 1.8G | |
| OS | Android 12 | |
| Product ID | Enlarged TP, based on TVE1328R, with back standing usb3.0 & BH04B-PASK-1 | |
| RAM | 4G LpDDR4X | |
| Memory | 64G eMMC | |
| Display | 13.3inch | |
| Type of Touch panel | 13.3inch, 2560×1600, typ 300cd/㎡ | |
| Case | GFF,Anti-Glare Surface treatment | |
| Battery | N/A | |
| Camera | Front camera 8Mp min + no rear camera. | |
| Wi-Fi | WI-FI 5 802.11 AC a/b/g/n | |
| Bluetooth | min Dual BT4.0 and BT classic (2.0 + EDR/3.0) | |
| USB port | x1 USB 3.0 High Speed | |
| CAN | x1 ( up to 1Mbpcs ), | |
| SD port | none | |
| SIM port | ||
| Button | Power, VOL-, VOL+ | |
| 4pin socket | FDCAN (CAN H, CAN L, 24V， GND) | |
|
Sensor |
G-sensor | |
| Light Sensor | none | |
| P Sensor | none | |
| E-Compass | none | |
| GYRO | none | |
| Fingerprint | none | |
| Hall | none | |
| NFC | none | |
| Location | N/A | |
| LED | RGB LED, near camera | |
| Speaker | 2x 1W built-in speaker | |
| Charger | BH04B-PASK-1 connector | |
Dear customer;
We would like to thank you for your recent purchase. We truly care about your user experience.
If you have any questions or concerns, please feel free to contact us. Our customer support team is standing by to assist you.
Best regards
Service Team
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.
Product Usage Instructions
- Power On/Off
To power on the device, press and hold the Power button until the screen lights up. To power off, press and hold the Power button and follow the on-screen prompts. - Connecting to Wi-Fi
In the device settings, locate the Wi-Fi section and select your network from the available options. Enter the password if prompted to connect. - Using USB Port
You can connect external devices to the USB port for data transfer or charging. Make sure to use compatible USB cables for optimal performance. - Taking Photos
To take photos, open the camera app and use the front camera.
Adjust settings as needed and capture your desired images. - Audio Output
The device is equipped with built-in speakers for audio output.
Adjust the volume using the Volume+ and Volume- buttons.
FAQ
Q: Does the device have a rear camera?
A: No, the device only has a front camera with a minimum of 8Mp.
Q: What type of display does the device have?
A: The device features a 13.3-inch display with a resolution of 2560×1600 and a brightness of approximately 300cd/m².
FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to the user.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 15.105 Information for the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connecting the equipment to a socket on a circuit different from that to which the receiver is connected.
- Contact with the provider or a radio TV technician for help.
Specific absorption rate (SAR):
This Device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a margin of safety designed to ensure the safety of all people regardless of their age or health.
The FCC Statement of Exposure to RF and the SAR limit for the United States (FCC) is 1.6 W/kg average for each gram of tissue. This device was tested for typical operations of use on the body, with the back of from the body. To maintain compliance with FCC RF exposure requirements, The use of belt clips, covers and similar accessories must not contain metallic components in their assembly. The use of accessories that do not meet these requirements may not meet FCC RF exposure requirements and should be avoided.
Functioning in the body
This device was tested for typical operations of use in the body. To comply with RF exposure requirements, a minimum separation must be maintained between the user’s body and the telephone, including the antenna. Third-party accessories such as belt clips. covers and similar accessories used with this device should not contain metallic components, accessories that do not meet these RF exposure requirements and should be avoided from use on the body. Use only the supplied antenna or an approved antenna.
IC Caution
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
SAR Statement
The device has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limit is 1.6 watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. During testing, TVE1328R (27197-TVE1328R) radios are set to their highest transmission levels and placed in positions that simulate uses against the head, with no separation, and when worn or carried against the torso of the body, with 5mm separation. To reduce exposure to RF energy, use a hands-free option, such as the built-in speaker phone, the supplied headphones, or other similar accessories. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. Although this device has been tested to determine SAR in each band of operation, not all bands are available in all areas. Bands are dependent on your service provider’s wireless and roaming networks.
Documents / Resources
 |
LPG SYSTEMS SAS TVE1328R Tablet [pdf] User Manual TVE1328R Tablet, TVE1328R, Tablet |