Lowes Shackle Lock Instruction Manual

Lowes-LOGO

Lowes Shackle Lock

Lowes-Shackle-Lock-PRODUCT

Step

  1. Step 1
    Turn the dials and align the numbers to 0-0-0 as indicated.
    • The lock consists of:
      • Shackle
      • Code Wheel
      • Marker Line
  2. Step 2
    Turn the shackle 180 and press down.
  3. Step 3:
    Turn the dials to your own combination.
    Lowes-Shackle-Lock (2)
  4. Step 4
    Lift and turn shackle to initial position, now your combination has been set successfully.
    Lowes-Shackle-Lock (1)

Specifications

Component Description
Shackle The U-shaped part of the lock that opens and closes.
Code Wheel The rotating dials used to set the combination.
Marker Line The line used to align the numbers for the combination.

FAQ

  1. What should I do if I forget my combination?
    Unfortunately, if you forget your combination, you may need to contact the manufacturer for assistance or use a lock-picking service.
  2. Can I reset the combination after setting it?
    Yes, you can reset the combination by following the same steps outlined above.
  3. Is there a default combination for new locks?
    Yes, the default combination for new locks is usually set to 0-0-0.

Documents / Resources

PDF thumbnailShackle Lock
Instruction Manual · Shackle Lock, Shackle, Lock

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.