Lowes Ceiling Lamp
INSTALLATION
- Drill a hole in the ceiling.
- Insert the expansion bolt in the ceiling.
- Mount the crissbar by screws.
- Connect the cable.
- Mount the bracket.
- Put the lamp shade and light source.
Cautions:
- Should be installed by professional person.
- During the cleaning and installation remember to cut the power off
- Keep the lamps away from corrosine chemicals and air such as acid and alkali.
- Do not wash it with water, but wipe it clean with a soft cloth.
Accessory List
Safety & Preparations
- Turn off power at the circuit breaker or fuse box. Make sure the power to the ceiling electrical box is off.
- Use a voltage tester to confirm no electricity in wires.
- Make sure the electrical box in the ceiling is secured to structure (joist/support), and rated to support the fixture’s weight. A heavy fixture may require metal box or reinforced box.
- Check local codes/building rules, especially for grounding and wire gauge.
Maintenance & Care
- Wipe glass/metal parts with soft cloth; use mild cleaner. Avoid abrasive cleaners.
- Check screws/nuts occasionally to ensure fixture stays secure.
- Replace bulbs promptly when they burn out; using correct type.
Specifications
Here are the kinds of specifications and features you’ll see listed for a Lowe’s ceiling lamp:
| Spec | Typical Values / Notes |
|---|---|
| Type | Flush mount, semi-flush, pendant, etc. |
| Bulb Type | LED (integrated or replaceable), incandescent, CFL. |
| Bulb Base | E26 (medium base) or integrated LED modules. |
| Number of Bulbs | One or more (2, 3, etc.) depending on size/style. |
| Maximum Wattage | For non-LED bulbs: often 60 W per bulb. Overall fixture maximum (sum). For LED: total wattage of fixture for integrated LED. |
| Fixture Wattage / Lumens | LED fixtures often specify lumens (light output) and watts used. E.g. 1,687 lumens, 22.5 W for a 12-inch LED fixture. |
| Color Temperature | Warm white (~3000K), sometimes 4000K, etc. Only for LED or when specified. |
| Finish / Material | Metal finishes (nickel, bronze, satin, etc.), glass (frosted, alabaster, clear), plastic for diffusers. |
| Dimensions | Diameter/width, height/depth (how far it drops from ceiling). Important for fitting and aesthetics. |
| Usage Rating | Indoor/dry locations; sometimes damp/wet rated if for bathrooms, etc. |
| Certifications | ETL, UL, or ENERGY-STAR label if energy efficient LED. |
| Warranty / Lifetime | For integrated LED type, they often mention LED lifetime (e.g. 30,000 hours), plus a warranty period on the fixture. Non-LED typically the standard 1 year or more. |
Documents / Resources
 | Ceiling Lamp |
References
- User Manualmanual.tools
Published: September 22, 2025