Lowes Bracket Assembly Kit Instruction Manual

Lowes Bracket Assembly Kit

Part List

Hardware List

Assembly Instructions 1/2

IMPORTANT

• Use a soft cloth between these parts and the floor.
• Do not use power tools above 8 volts to assemble.
• Do not tighten all the bolts until each part is properly assembled.
• The unit must be level to work properly. Use the included adjustable levelers to level.
• Keep Wrench as the bolts may need to be tightened in the future.

1. STEP 1 Place frame on a soft cloth. Attach unit to Frame with Flat Washers, Spring Washers and Head Cap Bolts, tightening bolts only halfway. Tighten all Bolts.
2. STEP 2 Attach unit to Connerctor (B) with Bolts, Flat Washers, Spring Washers and Nuts, tightening bolts and nuts only haflway. (See Figure 1) Tighten all Bolts and Nuts.
3. STEP 3
   Place unit onto Base (C).

FAQ

What tools are needed for assembly?

An Allen wrench is recommended for tightening screws to 50%.

What should I do if the screws do not align?

Loosen all screws to 50% and adjust the alignment before continuing.