ACCHM2 Series
Wi-Fi Chimebox
User Manual
ACCHM2 Series Wi-Fi Chimebox
Overview
- QR Code
- Release Tab
- Power plug
- Slot
- Reset Button*
- Status Indicator
Status Indicator
 |
Device Ready |
 |
Ready for network connection |
 |
Device malfunction* |
 |
Network connection failed* |
 |
Firmware update in progress |
*Try resetting the device by holding down the reset button.
IMPORTANT
- Ensure you are on a 2.4 GHz Wi-Fi connection.
- Ensure your 2K Wired/Battery Doorbell and Wi-Fi Chime have the latest firmware version in the device settings.
Setup
- Download Lorex Home app.
https://app.lorex.com/home/download - Attach the plug, and then plug your Chime into an outlet.
Note
To remove the power plug, lift up on the release tab. - Tap
in the app , and then follow the in-app instructions to add the Chime.
Need help?
Scan the below QR code for additional support material.
https://help.lorextechnology.com/series/acchm2
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at: lorex.com/pages/warranty
Copyright © 2022 Lorex Technology Inc
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
ACCHM2_QSG_TRILINGUAL_R1
Documents / Resources
 |
LOREX ACCHM2 Series Wi-Fi Chimebox [pdf] User Manual ACCHM2 Series Wi-Fi Chimebox, ACCHM2 Series, Wi-Fi Chimebox, Chimebox |
