MClimate Flood Sensor
“
Specifications
- Model: MC-LW-Flood
- Dimensions: 70 x 70 x 19mm
- Weight: 33g
- Power Supply: 1x CR123A battery 3VDC
- Sensors: 3-pin flood sensor, 1x NTC
temperature sensor - Material: ABS
- Environmental Conditions:
- – For indoor use only
- – For altitude up to 2000m
- – For maximum relative humidity of 80%
- – For environment with a degree of contamination 2 (PD2)
Product Usage Instructions
Safety Instructions
Please read the safety instructions before installing the
device. Failure to follow the recommended instructions in this
manual may be dangerous or in violation of the law. The
manufacturer is not responsible for any loss or damage caused by
failure to follow the instructions in the operating manual.
Commissioning
- In order to remove the top plastic cover, apply pressure with
two hands on the device from the top and bottom sides. - Gently twist the device counterclockwise until you feel a soft
click and lift the top plastic cover. - Insert a CR123A battery to power the device; it will
automatically connect to a network.
Installation
Follow the steps provided in the manual for installation.
Refer to the manual for information on LED indicators, buttons,
and device behavior.
FAQ
Where can I find more product information or get support?
You can visit mclimate.eu/lorawan-resources for more product
information or contact lorawan-support@mclimate.eu for support.
What should I do if the device is not connecting to the
network?
If the device is not connecting to the network, ensure that the
battery is inserted correctly and try resetting the device
according to the manual.
How do I know if the flood sensor is working?
You can test the flood sensor by triggering a simulated flood
scenario and checking if the device detects it correctly. Refer to
the manual for detailed testing instructions.
“`
MClimate Flood Sensor LoRaWAN® User manual
Scan the QR Code Bulgarian
to access MClimate
Flood Sensor LoRaWAN® extended
MClimate Flood Sensor LoRaWAN®, QR
documentation
.
Czech
Chcete-li zjistit, jak nainstalovat MClimate Flood Sensor LoRaWAN®, prohlédnte si kód QR nebo navstivte odkaz vedle nj.
mclimate.eu/lorawan-resources
Need some help?
For more product information and issues related to it, visit: mclimate.eu/lorawan-resources or write us to: lorawan-support@mclimate.eu
00359 800 3 1010 Monday-Friday 09:00 – 18:00 Sofia, Bulgaria Sofia Tech Park, labs building, floor 1
Italian
Per installare MClimate Flood Sensor LoRaWAN® scannerizzare il codice QR oppure aprire il link al suo lato.
Swedish
För att ta reda på hur du installerar MClimate Flood Sensor LoRaWAN®, skanna QR-koden eller besök länken bredvid den.
German
Um herauszufinden, wie man MClimate Flood Sensor LoRaWAN® installiert, scannen Sie den QR-Code oder besuchen Sie den Link daneben.
Polish
Aby dowiedzie si, jak zainstalowa MClimate Flood Sensor LoRaWAN®, zeskanuj kod QR lub odwied link obok niego.
Finnish
Tutustu MClimate Flood Sensor LoRaWAN®-laitteen asentamiseen, skannaa QR-koodi tai vierailla sen vieressä olevassa linkissä.
French
Pour savoir comment installer MClimate Flood Sensor LoRaWAN®, scannez le code QR ou visitez le lien à côté de celui-ci.
Dutch
Om te weten te komen hoe u MClimate Flood Sensor LoRaWAN® installeert, scan de QR-code of bezoek de link ernaast.
Spanish
Para saber cómo instalar
MClimate Flood Sensor
LoRaWAN®, escanee el
código QR o visite el enlace
al lado.
1
Table of content
What’s inside the box?
01
What is in the box?
2
02
Technical details, Safety instructions,
Legal Notices & Compatibility
3
03
Device Parts
4
04
Commissioning
5-7
05
LED, Buttons and behaviour
8-9
06
Installation
10
MClimate Flood Sensor LoRaWAN®
2
Technical specifications
Safety Instructions
Description: LoRaWAN® flood sensor
Please read the safety instructions before
Model: MC-LW-Flood
installing the device! Failure to follow the
Dimensions: 70 x 70 x 19mm
recommended instructions in this manual may
Weight: 33gr
be dangerous or in violation of the law. The
Frequency range: 863÷870MHz
manufacturer MClimate Jsc., is not responsible
LoRaWAN® Device type: Class A End-device
for any loss or damage caused by failure to
Power supply: 1xCR123A battery 3VDC
follow the instructions in the operating manual.
Sensors: 3-pin flood sensor, 1xNTC temperature Legal Notices
sensor
All information, including but not limited to,
Work temperature: -20° to +60°
features, functionality, and / or other product
Material: ABS
specifications are subject to change without
Environmental conditions, in which the device is notice. MClimate retains all rights to review or
intended to operate:
update its products, software or documentation
– for indoor use only;
without being required to notify any natural or
– for altitude up to 2000m;
legal person.
– for an ambient temperature:0° to +60°;
The MClimate and MClimate logo are trademarks
– for maximum relative humidity of 80% for
of MClimate Jsc. All other brands and product
temperature up to 31°, decreasing linearly to names mentioned herein are trademarks of
25% relative humidity at temperature 50°;
their respective owners.
– for environment with a degree of contamina-
tion 2 (PD2).
Compatibility
Storage and transportation conditions:
In order to operate MClimate Flood Sensor
– for an ambient temperature : -40° to +85°; LoRaWAN®, you will need:
– for relative humidity 5% to 90% without condensation Manufacturer
Battery type: 1xCR123A battery 3VDC Device operating voltage: 2.7 – 3.6VDC
MClimate Jsc, 1784 Sofia, Sofia Tech Park, Labs
Building, 111J Tsarigradsko Shose
Compliance with the WEEE Directive
The appliance marked with this symbol should
not be disposed of with other household waste.
It must be handed over to the relevant collection
point for the recycling of electrical and
electronic equipment.
3
Device parts
Negative battery terminal
LoRa Radio Module & Antenna
Positive battery terminal
Serial number (QR and text)
Status LED
XXXXXXXXXXXXXXXX
Anti-tamper button
LoRaWAN Flood Sensor Input: 3.6
Button Buzzer
Flood detection pins
Device on the inside, PCB top
Device, back 4
Commissioning 1 Open your LoRaWAN® Network provider access panel and add the device using the
supplied Serial Number, DevEUI, AppEUI (JoinEUI) and AppKey.
2 Continue the Installation with the instructions of
your LoRaWAN® Network provider.
The data is example. Do not use.
You can get DevEUI, AppEUI (JoinEUI) & AppKey information from the LoRaWAN® credentials .csv file we sent you with the fulfillment confirmation.
5
Commissioning 3 In order to remove the top plastic cover, apply pressure with two hands on the
device from the top and bottom sides. Then gently twist the device counterclockwise until you feel a soft click and lift the top plastic cover.
6
4 Insert a CR123A to power the device, it will automatically connect to a network.
In order to see whether the device has connected to the network, please check section LED, Buttons and behaviour.
CR123A 3VDC battery 7
LED, Buttons, Buzzer and behaviour
The device has 1 Button, 1 Anti-tamper button, 1 LED and 1 Acoustic buzzer. The anti-tamper button is activated when the device is opened. A special uplink will be sent at the earliest convenience. The second button is used during commissioning in order to check if the device has connected to the network.
Button
– When you click the Button, the device will activate the LED with the corresponding animation indicating whether the device is connected to a network or not.
– 5 fast blinks mean that the device is not yet connected to a network. A single slow blink means the device is connected to a network.
Buzzer
The Buzzer of the device activates when a flood has been detected. One can change this behaviour using the appropriate downlink. Please consult MClimate’s website for full documentation of available downlink commands for the device.
In order for the device to detect a flood, all three flood detection pins should be in contact with the conductive media.
8
Anti-tamper button Buzzer
Status LED
Button 9
Installation
There are no special instructions regarding the installation. One must consider NOT installing the device directly under appliances (e.g. washing machine) as the metal parts will influence the RF performance. Instead, please keep the device 1-2cm away from the appliance.
10
Documents / Resources
 |
LoRaWAN MClimate Flood Sensor [pdf] User Manual MClimate Flood Sensor, MClimate, Flood Sensor, Sensor |
