logitech MX Master 3S Wireless Mouse User Guide

logitech MX Master 3S Wireless Mouse

Welcome to Logitech Support

DETAILED SETUP

1. 1. Make sure the mouse is turned on.
      1. The number 1 LED under the mouse should be blinking fast.
         NOTE:
         If the LED is not blinking fast, do a long press of 3 seconds.
   2. Choose how you want to connect:
      1. Use the included LOGI BOLT wireless receiver:
      2. Plug the receiver into a USB port on your computer
      3. Connect directly via Bluetooth:
      4. Open the Bluetooth settings on your computer to complete the pairing.
      5. Click here for more details on how to do this on your computer. If you experience issues with Bluetooth, click here for Bluetooth troubleshooting.
   3. Install Logitech Options+ Software.
      1. Download the Logitech Options+ version to use all the possibilities this mouse has to offer. To download and learn more about the possibilities, click
         here

PAIR TO A SECOND COMPUTER WITH EASY-SWITCH

Your mouse can be paired with up to three diff erent computers using the easy-switch button to change the channel.

1. A short press on the Easy-Switch button will allow you to switch channels Select the channel you want and go to the next step.
2. Press and hold the Easy-Switch button for 3 seconds. This will put the mouse in discoverable mode so that it can be seen by yourcomputer. The LED will start blinking fast. Choose between two ways to connect your keyboard to your computer:
   1. Bluetooth: Open the Bluetooth settings on your computer to complete the pairing. You can find more details here
   2. USB receiver: Plug the receiver to a USB port, open Logitech Options+, and select:
      Add devices > Setup Logi Bolt device , andfollow the instructions.

LEARN MORE ABOUT YOUR PRODUCT

Product Overview

1. MagSpeed scroll wheel
2. USB-C charging port
3. Mode shift button for the scroll wheel
4. On/Off button
5. Gesture button
6. Darkfi eld 8000 DPI sensor
7. Thumb wheel
8.  Easy-Switch & connect button
9.  Battery status LED
10. Back/forward buttons

MagSpeed adaptive scroll-wheel

The speed-adaptive scroll wheel shifts between two scrolling modes automatically. As you scroll faster, it will automatically shift fromline-by-line scrolling to free-spinning.

• Line-by-line (ratchet) mode — ideal for precise navigation of items and lists.
• Hyper-fast (free-spin) mode — near-frictionless spinning, letting you fly through long documents and web pages.

Switch modes manually

You can also manually switch between modes by pressing the mode shift button

By default, mode shift is assigned to the button on top of the mouse.
In the Logitech Options+ Software, you can decide to disable smart-shift if you prefer to stay in a single scrolling mode and alwaysshift manually. You can also adjust the smartshift sensitivity, which will change the speed required to automatically shift into free spinning.

Thumb wheel

• Scroll side to side eff ortlessly with a stroke of your thumb.
• Install Logitech Options+ software to extend thumb wheel capabilities and more:
• Adjust thumbwheel scrolling speed, and direction
• Enable app-specific settings for the thumbwheel
• Zoom in Microsoft Word and PowerPoint
• Adjust brush size in Adobe Photoshop
• Navigate your timeline in Adobe Premiere Pro
• Switch between tabsin the browser Adjust volume
• Assign custom keystrokes to the wheel rotation (up and down)

Gesture Button

Install Logitech Options + software to enable gestures

To use the gesture button:

Hold down the Gesture button while moving the mouse left, right, up, or down.

You can use gestures for desktop navigation, app management, pan and more. You can assign up to fi ve diff erent actions to theGesture button. Or map gestures to other MX Master 3S buttons, including the middle button or manual shift button.

Back/Forward buttons

Conveniently located, the back and forward buttons enhance navigation and simplify tasks

To move back and forward:

Press the back or forward button to navigate web or document pages, depending on the location of the mouse pointer.

NOTE:

On the Mac, enabling the back/forward buttons requires installation of Logitech Options+ software.
Install Logitech Options+ software to unlock new capabilities for the back/forward buttons
In addition to enabling the buttons for use with Macs, Logitech Options+ software lets you map other useful functions to thebuttons, including undo/redo, OS navigation, zoom, volume up/down, and more.

Darkfi eld 8000 DPI sensor

Install Logitech Options+ software to enable the new capabilities of the Darkfi eld 8000 DPI Sensor
By default, the MX Master 3S has a 1000 DPI confi guration
In the Logitech Options+ Software, you can extend the sensor range to up to 8000 DPI.
Enabling this option will allow you to work faster and more precisely, allowing you to adjust the pointer speed to match high resolution monitors

App-Specifi c Settings

Your mouse buttons can be assigned to perform diff erent functions for diff erent applications. For instance, you can assign the thumbwheel to do horizontal scrolling in Microsoft Excel and zoom in Microsoft PowerPoint.
When installing Logitech options+ , you will have the possibility to install predefi ned app-specifi c settings that will adapt the mousebutton behavior to be optimized in selected applications.

Here are the app specifi c settings we have created for you

With these settings, the Gesture button and the wheel mode-shift button are keeping the same functionality across all applications.
Each of these settings can be customized manually, for any application

Flow

Work on multiple computers with a single MX Master 3S.
With Logitech Flow, you can use the mouse cursor to move from one computer to the next. You can even copy and paste betweencomputers, and if you have a compatible Logitech Keyboard, such as MX Mechanical, the keyboard will follow the mouse and switchcomputers at the same time. You will need to install Logitech Options+ software on both computers and follow these instructions

Battery

RECHARGE MX MASTER 3S

Connect one end of the provided charging cable to the USB-C port on the mouse and the other end to a USB power source

A minimum of 3 minutes charging gives you enough power for a full day of use. Depending on how you use the mouse, a full chargecan last up to 70 days*.
* Battery life may vary depending on user and operating conditions.

CHECK BATTERY STATUS

Three LED light on the side of the mouse indicate battery status

Install Logi Options+ software to receive battery status notifi cations, including low-charge warnings.

• LED Color Indications
• Green From 100% to 10% charge
• Red 10% charge or below
• Pulsing green While charging

How to clean your device

To clean your MX Master 3S, you can use a ratio of 70% Isopropyl alcohol to 30% water, as found in common cleaning solutions.
Other alcohols cause damage, and bleach is not recommended by the CDC.

STILL NEED HELP?
Want to ask other users with the same product a question? Join the conversation.

SUPPORT COMMUNITY

• LOGITECH SUPPORT
• Business Support Home
• Support Home
• Downloads & Apps
• Spare Parts
• MyHarmony Support
• Ultimate Ears Support
• Community Forums
• Compliance Certifi cates
• Warranty Information
• Privacy + Security
• Accessibility
• Contact Us

2021 Logitech. All rights reserved
https://support.logi.com/hc/en-us/articles/5218056588311-Getting-Started-MX-Master-3S