logitech H390 USB Computer Headset User Guide

logitech logoH390 USB Computer Headset
User Guidelogitech H390 USB Computer HeadsetH390
Setup Guide

KNOW YOUR PRODUCT

logitech H390 USB Computer Headset fig 1IN-LINE CONTROLLER    logitech H390 USB Computer Headset fig 2

CONNECTING THE HEADSET

Plug the USB-A connector into the computer
USB portlogitech H390 USB Computer Headset fig 3

HEADSET FIT

  1. To adjust headset size, move the headband up and down until it fits comfortably
    logitech H390 USB Computer Headset fig 4
  2. Move the microphone boom up or down until it is level with your mouth for better voice capture
    logitech H390 USB Computer Headset fig 5
  3. Boom can be tucked out of the way when not being usedlogitech H390 USB Computer Headset fig 6

CONTROLS

logitech H390 USB Computer Headset fig 7

www.logitech.com/support/H390
© 2022 Logitech Logitech, Logi and other Logitech marks are owned by Logitech and may be registered All other trademarks are the property of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice logitech logo

Documents / Resources

PDF thumbnailH390 USB Computer Headset
User Guide · H390, USB Computer Headset, Computer Headset, USB Headset, Headset, H390 Headset
PDF thumbnailH390 USB Computer Headset
User Guide · H390 USB Computer Headset, H390, USB Computer Headset, Computer Headset, Headset

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Como eu ativo o cancelamento de ruido?

    Cristian asks Como eu ativo o cancelamento de ruido?
    Manuals+ clarified question
    Question

    How do I activate noise cancellation on the Logitech H390 headset?

    Answer

    The Logitech H390 USB Computer Headset features a built-in noise-canceling microphone that is designed to automatically reduce background noise during use. There is no manual switch or button to "activate" this feature.

    To ensure the noise cancellation works effectively, follow these steps for proper placement:

    • Position the Microphone: Move the rotating microphone boom up or down until it is level with your mouth. This ensures the microphone captures your voice clearly while the hardware filters out ambient sounds.
    • Check Connection: Ensure the USB-A connector is firmly plugged into your computer's USB port.

    If you are referring to silencing your own voice, you can use the Mute button located on the in-line controller. A flashing red light indicates the microphone is muted, while a solid red light indicates the microphone is active.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.