Default credentials
- Username
- admin
- Password / access
- admin
Access: Web
Huawei B520 (Zain Fiber CPE, Speed4G)
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Zain router & modem login
Login addresses, default credentials, and setup instructions for Zain equipment.
Open router login http://192.168.1.1 (opens in a new tab)Open router login http://192.168.8.1 (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| ZainHuawei B520 (Zain Fiber CPE, Speed4G)Router · Web | http://192.168.8.1 (opens in a new tab) | admin | admin | Saudi Arabia — Zain KSA's official Fiber CPE activation deck for the Huawei B520 (an LTE CPE used as the home router/WAN bridge in Zain's fiber bundle). Zain's own PDF shows the login dialog with the label "Username: admin / password: admin" and a subsequent mandatory step captioned "We must change password for access router settings. Current password 'admin' then click finish." Recovery & reset instructionsBrowse to http://192.168.8.1, log in with admin / admin, then Zain's own quick-setup wizard forces a password change on first login (Settings > Modify Password, old password admin) before finishing setup. |
| ZainHuawei DG8245V (Zain Fiber Home Gateway)Modem / gateway · Web | http://192.168.1.1 (opens in a new tab) | user | HuaweiUser | Saudi Arabia — Zain KSA's official Fiber CPE activation deck for the Huawei DG8245V home gateway (GPON ONT + router + telephony, DSL port unused in Zain's fiber deployment). Zain's own PDF states: "The username and password mentioned in the bottom of CPE: Username: user / Password: HuaweiUser", shown against a photo of an actual unit's label — distinct from the per-unit random Wi-Fi SSID/key printed on the same label just below it. Recovery & reset instructionsBrowse to http://192.168.1.1 and log in with the username/password printed on the label on the bottom of the CPE (Zain's own guide gives user / HuaweiUser as the printed default); a rear reset button restores factory defaults if changed. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.