Use your setup password
- Username
- No username required
- Password / access
- Password created during setup
Access: Web
Mi Router 4A Gigabit Edition, Router AX3000T
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Xiaomi router & modem login
Login addresses, default credentials, and setup instructions for Xiaomi equipment.
Open router login http://192.168.31.1 (opens in a new tab)Open router login http://router.miwifi.com (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| XiaomiMi Router 4A Gigabit EditionRouter · Web | http://router.miwifi.com (opens in a new tab)http://192.168.31.1 (opens in a new tab) | No username required | Password created during setup | The Mi Router 4A Gigabit Edition answers on 192.168.31.1 and has no shared default. Whoever runs initial setup — through router.miwifi.com, the Mi Home app, or the older Mi WiFi app — creates the management password, and there is no username to go with it. Recovery & reset instructionsWith the router on, hold the Reset button on the bottom until the indicator light changes/blinks (~5–10 seconds) to restore factory settings. |
| XiaomiRouter AX3000TRouter · Web | http://router.miwifi.com (opens in a new tab)http://192.168.31.1 (opens in a new tab) | No username required | Password created during setup | AX3000T is Xiaomi's AX3000 WiFi 6 router. It carries no universal password: the management password is one you choose the first time you set the unit up, either at router.miwifi.com or from the Mi Home app. Recovery & reset instructionsHold the Reset button underneath the powered router until the indicator light changes or blinks — roughly 5-10 seconds — to return it to factory settings. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.