Skip to content
Manuals+

ROUTER & MODEM REFERENCE

Verizon router & modem login

Login addresses, default credentials, and setup instructions for Verizon equipment.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

1

Check the device label

Username
No username required
Password / access
Password on the device label

Access: Web

5G Internet Gateway (ASK-NCQ1338), 5G Internet Gateway (LVSKIHP / LV55), Internet Gateway (ASK-NCM1100) and other listed models

Source (opens in a new tab)
2

Check the device label

Username
admin
Password / access
Password on the device label

Access: Web

Fios Router G3100, Verizon Router CR1000A

Source (opens in a new tab)
3

Default credentials

Username
admin
Password / access
password

Access: Not specified

Model not specified; check the table for applicability.

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

7 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / deviceLogin addressUsernamePassword / accessNotes & source
Verizon–Router · Not specified–adminpassword

Model not specified by this list.

Verizon5G Internet Gateway (ASK-NCQ1338)Modem / gateway · Webhttp://192.168.0.1 (opens in a new tab)No username requiredPassword on the device label

Askey-made 5G/LTE fixed-wireless home gateway for Verizon 5G Home Internet (LV55/LVSKIHP variants) — a fixed-wireless unit distinct from the Fios fibre routers G3100/CR1000A already covered. Password-only Web GUI login (no username), activated via the My Verizon app. Verizon: "You can find the default password on the label under the 5G Internet Gateway."

Recovery & reset instructions

Reset to factory defaults from the admin Web GUI, or use the security questions set during setup to revert the admin password. If forgotten, the label password under the unit is the factory default; default LAN IP is 192.168.0.1.

Verizon5G Internet Gateway (LVSKIHP / LV55)Modem / gateway · Webhttp://192.168.0.1 (opens in a new tab)No username requiredPassword on the device label

Wi-Fi 6E tri-band 5G Home gateway made by Wistron NeWeb (FCC ID NKR-LVSK-IHP) — a distinct, newer OEM/hardware SKU from the already-seeded Askey ASK-NCQ1338 5G gateway (Wi-Fi 6, different manufacturer). Login is password-only, no username field.

Recovery & reset instructions

Answer one of your saved security questions in the web GUI to reset the admin password to factory default; the original factory-default password is printed on the label on the underside of the gateway.

VerizonFios Router G3100Modem / gateway · Webhttp://myfiosgateway.com (opens in a new tab)http://192.168.1.1 (opens in a new tab)adminPassword on the device label

The G3100 uses username 'admin' plus a per-device Administrator Password printed on the rear label — there is no shared default password. The admin password on the label is separate from the WiFi password (also on the label).

Recovery & reset instructions

Browse to http://myfiosgateway.com or http://192.168.1.1. Sign in with username 'admin' and the unique Administrator Password printed on the label on the back of the G3100. To factory reset, press and hold the recessed Reset button on the back ~15 seconds until the router restarts, then log in with the label's admin password.

VerizonInternet Gateway (ASK-NCM1100)Modem / gateway · Webhttp://mynetworksettings.com (opens in a new tab)http://192.168.1.1 (opens in a new tab)No username requiredPassword on the device label

Askey model NCM1100 LTE fixed-wireless home gateway (NCM1100E is the business variant) for Verizon LTE Home Internet — managed at mynetworksettings.com or 192.168.1.1, distinct from the 5G ASK-NCQ1338 gateway and the LTE Home Router in this run. Password-only login (no username). Verizon: "enter the password that is printed next to the Password on the label on the back of the Gateway."

Recovery & reset instructions

Use the reset button to restore factory defaults; the password printed next to 'Password' on the rear label is the factory default, and the factory Wi-Fi uses a unique WPA2 key on the rear sticker.

VerizonLTE Home RouterModem / gateway · Webhttp://192.168.1.1 (opens in a new tab)No username requiredPassword on the device label

Dual-band Wi-Fi 5 (802.11ac) LTE fixed-wireless home router for Verizon LTE Home Internet, broadcasting LTE-Home-xxxx SSIDs (2.4G + 5G) — distinct from the 5G ASK-NCQ1338 gateway and the Fios routers already covered. Password-only login (no username). Verizon: "Log in using the default password (Check your router's product label for your unique GUI Password)."

Recovery & reset instructions

Press and hold the reset button on the router to restore factory defaults; the unique GUI password on the product label is the factory default. Manage at http://192.168.1.1.

VerizonVerizon Router CR1000AModem / gateway · Webhttp://myfiosgateway.com (opens in a new tab)http://192.168.1.1 (opens in a new tab)adminPassword on the device label

Like the G3100, the CR1000A ships with username 'admin' and a unique Administrator Password on the rear label — no universal default. The admin password differs from the WiFi/network password shown on the same label.

Recovery & reset instructions

Open a browser to http://myfiosgateway.com or http://192.168.1.1 and sign in with username 'admin' and the Administrator Password printed on the label on the back of the CR1000A. To factory reset, press and hold the recessed Reset button ~15 seconds until the router reboots, then log in with the label's admin password.

Related login addresses

GET CONNECTED

How to reach your router

  1. Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
  2. Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
  3. Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.