Default credentials
- Username
- user
- Password / access
- user
Access: Web
DDW361 Rev., DVW324 (izzi México gateway)
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Ubee router & modem login
Login addresses, default credentials, and setup instructions for Ubee equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| UbeeDDW361 Rev.Router · DOCSIS 3.0 | – | user | user | Defaults may depend on the listed model, revision, firmware or ISP. |
| UbeeDVW324 (izzi México gateway)Modem / gateway · Web | http://192.168.0.1 (opens in a new tab) | user | user | Ubee DVW324 DOCSIS cable gateway issued by izzi México — first izzi row with a documented two-tier static default. izzi's official credentials page has a dedicated section for this model: "en el apartado Username ingresa la palabra user, y en el apartado Password ingresa la palabra user. Si no puedes acceder con user, prueba ingresando la palabra admin en Username y en Password (recuerda ingresarla en minúsculas)." Recovery & reset instructionsA short press-and-release of the reset button restarts the modem without changes; press and hold for 30 seconds to restore factory settings. If user/user fails, the documented fallback is admin/admin. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.