ROUTER & MODEM REFERENCE

Turris router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Use your setup password

Username: No username required
Password / access: Password created during setup

Access: Web

Mox, Omnia

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

2 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
TurrisMoxRouter · Web	http://192.168.1.1 (opens in a new tab)	No username required	Password created during setup	Modular open-source router (1GHz dual-core, Turris OS / OpenWrt-based), expandable via MOX B-G modules with Wi-Fi as an mPCIe/SDIO add-on. There is NO default password: the first step of the reForis wizard at http://192.168.1.1 (when MOX runs as DHCP server) has you set the administrative password. Advanced LuCI/SSH uses user 'root'. Manufacturer (opens in a new tab) Recovery & reset instructions Use the rear reset button's LED-count rescue modes; select the factory-reset mode and release to restore defaults and re-run the first-boot wizard.
TurrisOmniaRouter · Web	http://192.168.1.1 (opens in a new tab)	No username required	Password created during setup	Open-source dual-band router running Turris OS (OpenWrt-based) with the reForis web admin. There is NO default password: you create the admin password in the first-boot reForis wizard at http://192.168.1.1. reForis login is password-only (no username); the advanced LuCI/SSH interface uses user 'root' with the same password. Manufacturer (opens in a new tab) Recovery & reset instructions Use the rear reset button to select a rescue mode by LED count; holding to the factory-reset count and releasing restores factory defaults and re-triggers the first-boot wizard.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.