Check the device label
- Username
- admin
- Password / access
- Password on the device label
Access: Web
Gigatex Fiber T3-ST-224F
Source (opens in a new tab)ROUTER & MODEM REFERENCE
True router & modem login
Login addresses, default credentials, and setup instructions for True equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| TrueGigatex Fiber T3-ST-224FModem / gateway · Web | http://192.168.1.1 (opens in a new tab) | admin | Password on the device label | Thailand's second row, distinct ISP from AIS — GPON fiber gateway with WiFi and voice (telephony) ports, standard-issue for TrueOnline Gigatex Fiber. True's own setup guide has the user log in with username admin plus a per-unit password read off the device itself, not a shared string: "ในช่อง Password กรอกรหัส 8 ตัว ที่ได้จาก Default Password ด้านล่าง จากนั้น กด Login" ("In the Password field, enter the 8-digit code from the Default Password [printed on the unit], then click Login"). Recovery & reset instructionsRear reset pinhole held ~10 seconds restores factory defaults, restoring the label-printed Default Password, per True's standard practice. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.