Default credentials
- Username
- admin
- Password / access
- admin
Access: Web
TEW-435BRM, TEW-671BR Rev., TEW-712BR
Source (opens in a new tab)ROUTER & MODEM REFERENCE
TRENDnet router & modem login
Login addresses, default credentials, and setup instructions for TRENDnet equipment.
Open router login http://192.168.10.1 (opens in a new tab)Open router login http://tew-929dru (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| TRENDnet–Router · Not specified | – | admin | password | Model not specified by this list. |
| TRENDnetTEW-435BRMRouter · Not specified | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| TRENDnetTEW-639GR Rev.Router · Not specified | – | admin | Leave blank | Defaults may depend on the listed model, revision, firmware or ISP. |
| TRENDnetTEW-671BR Rev.Router · Not specified | – | admin | admin | Defaults may depend on the listed model, revision, firmware or ISP. |
| TRENDnetTEW-712BRRouter · Web | http://192.168.10.1 (opens in a new tab) | admin | admin | TRENDnet's first row in the dataset — N300 Wireless Router, compact home-router form factor. Official TRENDnet support FAQ states: "The default User Name and password are both admin." Recovery & reset instructionsPress and hold the recessed reset button on the rear panel for ~10 seconds until all LEDs blink, then release; the router reboots to factory defaults. |
| TRENDnetTEW-828DRURouter · Web | http://192.168.10.1 (opens in a new tab) | admin | Password on the device label | AC2600 MU-MIMO dual-band wireless router — a newer, higher tier than the same run's TEW-712BR, and a genuine label-unique credential rather than a shared default. Official TRENDnet support FAQ states: "the Router is preconfigured with unique management and wireless passwords. The default settings are located on a sticker on the front of the Router and on the bottom label." Recovery & reset instructionsPress and hold the recessed reset button for ~10-15 seconds until the LEDs blink, then release; router reboots to the original factory-label password. |
| TRENDnetTEW-929DRURouter · Web | http://tew-929dru (opens in a new tab)http://192.168.10.1 (opens in a new tab) | admin | Password on the device label | AX1800 dual-band Wi-Fi 6 dual-WAN VPN SMB router with a 2.5GbE LAN port — TRENDnet's business-tier SKU, distinct from the two consumer TEW models in this same run. Official TRENDnet User's Guide states: "User Name: admin" and that the router comes "pre-configured with a unique administrator password" found "on the sticker included in the router package contents or on the device label located on the bottom of the router." Recovery & reset instructionsPress and hold the reset button for ~10-15 seconds until LEDs blink, then release; router reboots to the original factory-label password. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.