ROUTER & MODEM REFERENCE

Telkom router & modem login

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Default credentials

Username: admin
Password / access: admin

Access: Web

Billion 400G (VPN-Lite Router), Netgear DGN2200Mv2 (N300 Wireless ADSL2+ Modem Router)

Source (opens in a new tab)

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

2 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / device	Login address	Username	Password / access	Notes & source
TelkomBillion 400G (VPN-Lite Router)Router · Web	http://10.0.0.2 (opens in a new tab)	admin	admin	South Africa — Telkom's own VPN-Lite Billion 400G user manual, distinct ISP from the already-seeded Vodacom. Telkom's official PDF states: "You will be prompted to supply a username and password. The user name is admin and the password is admin" and separately, for the setup utility: "By default the router login name will be admin and the login password will be admin. The default IP address for the router is 10.0.0.2." Manufacturer (opens in a new tab) Recovery & reset instructions Open a browser to http://10.0.0.2 and log in with username admin / password admin (the manual notes this is the factory-default state); Telnet access uses the same admin/admin pair via "telnet 10.0.0.2".
TelkomNetgear DGN2200Mv2 (N300 Wireless ADSL2+ Modem Router)Modem / gateway · Web	http://www.routerlogin.com (opens in a new tab)http://10.0.0.2 (opens in a new tab)	admin	admin	South Africa — Telkom's own "do Broadband powered by Telkom" co-branded NETGEAR DGN2200Mv2 user manual (ADSL2+ modem router), a distinct model/revision and IP scheme (10.0.0.2, not the generic 192.168.0.1 already seeded for the plain Netgear DGN2200). Telkom's official PDF states: "Enter admin for the user name and your password (or the default, admin)." Manufacturer (opens in a new tab) Recovery & reset instructions Browse to http://www.routerlogin.com (or http://10.0.0.2) and log in — the manual states to enter admin for the user name and the password, or the default, admin.

Related login addresses

GET CONNECTED

How to reach your router

Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.