Check the device label
- Username
- No username required
- Password / access
- Password on the device label
Access: Web
Huawei B818, Zyxel P8702N
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Telenor router & modem login
Login addresses, default credentials, and setup instructions for Telenor equipment.
Open router login http://192.168.1.1 (opens in a new tab)Open router login http://wifi.telenor.no (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| TelenorHuawei B818Router · Web | http://192.168.1.1 (opens in a new tab) | No username required | Password on the device label | Telenor Norway's 4G/LTE home-broadband router (Huawei B818), used where fixed fibre/DSL isn't available — a distinct hardware tier from the same run's DSL-era Zyxel P8702N. Telenor's own support page states: "Passordet er det samme som ditt opprinnelige trådløse passord. Du finner det på klistrelappen på baksiden av ruteren etter WIFI" ("The password is the same as your original wireless password, found on the sticker on the back of the router after WIFI.") Recovery & reset instructionsOpen a browser and go to http://192.168.1.1. The admin password equals the router's original wireless password, found on the sticker on the back of the router after 'WIFI'. No separate admin username is required. |
| TelenorZyxel P8702NRouter · Web | http://wifi.telenor.no (opens in a new tab)http://192.168.1.1 (opens in a new tab) | No username required | Password on the device label | Norway's first row in the dataset — Telenor DSL-era home router (Zyxel P8702N). Telenor's own support page states the network password is printed on a label on the underside of the router, and specifically for the P8702N: "står koden etter teksten WPA2 (består av 13 bokstaver)" ("the code is found after the text WPA2 (13 letters)"). No shared static default; each unit's code is unique. Recovery & reset instructionsGo to wifi.telenor.no while connected to the home network and log in with the administrator password. For this model, use the password found after 'WPA2' on the label on the underside of the router (13 letters), not the usual 'admin:' code some other Telenor units use. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.