Skip to content
Manuals+

ROUTER & MODEM REFERENCE

Technicolor router & modem login

Login addresses, default credentials, and setup instructions for Technicolor equipment.

Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.

QUICK START

Most likely login options

See every listed combination ↓

Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.

Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.

MODEL DETAILS

Login addresses & credentials

3 records

Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.

Models, login addresses, credentials, instructions and sources
Model / deviceLogin addressUsernamePassword / accessNotes & source
TechnicolorCGA4233 (izzi México gateway)Modem / gateway · Webhttp://192.168.0.1 (opens in a new tab)userPassword on the device label

First izzi (México) entries in the dataset. Password is printed on the device label as 'GUI Password'; username is the fixed word 'user'. Account locks for 10 minutes after 5 failed login attempts per the same izzi help article.

Recovery & reset instructions

Password is unique per device, printed on the modem's label; if lost, contact izzi support or use the physical reset button to restore factory settings.

TechnicolorTC8305C (izzi México gateway)Modem / gateway · Webhttp://10.0.0.1 (opens in a new tab)adminpassword

Technicolor TC8305C DOCSIS cable gateway issued by izzi México — reached at 10.0.0.1, distinct from the 192.168.0.1 used by izzi's other cable modems. izzi's official credentials page has a dedicated section for this model: "en el apartado Username, ingresa la palabra admin" and "En el apartado Password, deberás ingresar la palabra password (en minúsculas)."

Recovery & reset instructions

A short press-and-release of the reset button restarts the modem without changes; press and hold for 30 seconds to restore factory settings.

TechnicolorVivo Fibra Router (Technicolor variant)Modem / gateway · Webhttp://192.168.15.1 (opens in a new tab)No username requiredadmin

Explicit exception stated on Vivo's own configuration help page: the username field must be left blank for Technicolor-brand Vivo routers, unlike the generic-vendor sibling row which uses admin/admin.

Recovery & reset instructions

Change the default password immediately after first login; use the physical reset button to restore factory defaults if changed and forgotten.

Related login addresses

GET CONNECTED

How to reach your router

  1. Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
  2. Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
  3. Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.

Admin password or Wi-Fi password?

The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.

If the password does not work

Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.

Find your model’s manual →

Sources & data

Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.

Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.