Check the device label
- Username
- admin
- Password / access
- Password on the device label
Access: Web
Wi-Fi Hub
Source (opens in a new tab)ROUTER & MODEM REFERENCE
TalkTalk router & modem login
Login addresses, default credentials, and setup instructions for TalkTalk equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| TalkTalkWi-Fi HubModem / gateway · Web | http://192.168.1.1 (opens in a new tab) | admin | Password on the device label | Login details are on the sticker under the removable settings card on the back of the hub. TalkTalk's own guidance notes that only older/generic units fall back to admin/admin — current Wi-Fi Hubs use the printed unique credentials. Recovery & reset instructionsTo log in: connect to the hub, browse to 192.168.1.1 and enter the username and password from the sticker underneath the removable settings card on the back of the Wi-Fi Hub. To factory reset: with the hub on, press and hold the recessed Reset button on the back for about 15 seconds until it restarts; credentials revert to the values on the back-of-hub sticker. |
| TalkTalkWi-Fi Hub Black (Huawei DG8041W)Router · Web | http://192.168.1.1 (opens in a new tab) | No username required | Password on the device label | Huawei-made variant of TalkTalk's fibre router, distinct hardware from the Sagemcom Fast 5364 'Wi-Fi Hub' already seeded. TalkTalk's official help page lists 'Wi-Fi Hub Black' among the models covered: "You'll find these on the sticker underneath the removable settings card on back of your Wi-Fi Hub. If your router doesn't have a sticker, your default username and password will be set to 'Admin'." Recovery & reset instructionsLogin credentials are printed on the sticker underneath the removable settings card on the back of the unit; if no sticker is present, the documented fallback default is username and password both 'Admin'. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.