Use your setup password
- Username
- No username required
- Password / access
- Password created during setup
Access: Web
MR2200ac (Mesh Router), RT2600ac, RT6600ax and other listed models
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Synology router & modem login
Login addresses, default credentials, and setup instructions for Synology equipment.
Open router login http://192.168.1.1 (opens in a new tab)Open router login http://router.synology.com (opens in a new tab)
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| Synology–Router · Not specified | – | admin | Leave blank | Model not specified by this list. |
| SynologyMR2200ac (Mesh Router)Mesh system · Web | http://router.synology.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | No username required | Password created during setup | No factory default login — SRM makes you create the admin account on first setup, so there is nothing like admin/admin. The MR2200ac can also be configured through the Synology DS router app. Recovery & reset instructionsConnect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology' (or set it up in the DS router mobile app). Browse to http://router.synology.com (or http://192.168.1.1:8000); the SRM wizard prompts you to create your own administrator account. To reset, hold RESET ~4 seconds (soft) or ~10 seconds (full factory reset) until it reboots. |
| SynologyRT2600acRouter · Web | http://router.synology.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | No username required | Password created during setup | There is no factory admin password. Synology Router Manager (SRM) makes you create the administrator account during first-time setup, so the login is whatever you chose. Synology also recommends deactivating the default 'admin' username and using a custom one. Recovery & reset instructionsConnect a computer by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Open a browser and go to http://router.synology.com (or http://192.168.1.1:8000). The SRM setup wizard prompts you to create your own administrator account (username + password) on first run. To factory reset, press and hold the RESET button ~4 seconds for a soft reset (network/password) or ~10 seconds for a full factory reset until the router beeps/reboots. |
| SynologyRT6600axRouter · Web | http://router.synology.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | No username required | Password created during setup | No default password ships on the RT6600ax. SRM forces you to set the administrator account during setup, so credentials are user-created. Avoid reusing 'admin'/'root' as the username per Synology's own guidance. Recovery & reset instructionsConnect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Browse to http://router.synology.com (or http://192.168.1.1:8000) and complete the SRM wizard, which prompts you to create your own administrator account. To reset, hold the RESET button ~4 seconds (soft: network/password) or ~10 seconds (full factory reset) until it reboots. |
| SynologyWRX560 (WiFi 6 Mesh Router)Router · Web | http://router.synology.com (opens in a new tab)http://192.168.1.1 (opens in a new tab) | No username required | Password created during setup | No default password. Like all Synology routers running SRM, the WRX560 requires you to create the administrator account during first-time setup, so the login is user-defined rather than a factory default. Recovery & reset instructionsConnect by Ethernet, or join WiFi SSID Synology_(Serial) with password 'synology'. Browse to http://router.synology.com (or http://192.168.1.1:8000) and complete the SRM setup wizard, which prompts you to create your own administrator account. To reset, hold the RESET button ~4 seconds (soft reset) or ~10 seconds (full factory reset) until the router reboots. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.