Check the device label
- Username
- admin
- Password / access
- Password on the device label
Access: Web
Sagemcom RAC2V1K / Askey Router
Source (opens in a new tab)ROUTER & MODEM REFERENCE
Spectrum router & modem login
Login addresses, default credentials, and setup instructions for Spectrum equipment.
Connect to the router’s Wi-Fi or Ethernet first. These links open a new tab on your device; the address may differ if the network was reconfigured.
QUICK START
Most likely login options
Start with the option that matches your model. Defaults apply to the factory state; use the password you chose if the device has already been set up.
Options are ordered by manufacturer documentation and coverage among the listed models. Hardware, firmware, and ISP versions can differ.
MODEL DETAILS
Login addresses & credentials
Passwords are case-sensitive. “Leave blank” means an empty field; “Not specified” means the source does not provide that detail. Entries without a model are brand-level references.
| Model / device | Login address | Username | Password / access | Notes & source |
|---|---|---|---|---|
| SpectrumSagemcom RAC2V1K / Askey RouterRouter · Web | http://192.168.1.1 (opens in a new tab) | admin | Password on the device label | Listed as Spectrum (Charter). Spectrum's own Sagemcom/Askey units print the default sign-in on the rear label; older models used admin/admin but current RAC2V1K/RAC2V1S routers are largely locked to the My Spectrum app, so the web tool is view-only for many settings. Recovery & reset instructionsConnect to the router and browse to http://192.168.1.1. Sign in with username 'admin'; the password is printed on the label on the back of the router. Newer Spectrum routers restrict most settings — use the My Spectrum app or spectrum.net to change the WiFi name/password. To factory reset, press and hold the recessed Reset button on the back ~10 seconds until the lights cycle, then sign in with the label credentials. |
| SpectrumWiFi 6 Router (Sagemcom SAX1V1S, Advanced WiFi)Router · Web | – | No username required | Password on the device label | Listed as Spectrum (Charter Communications). The router shipped for Spectrum's 'Advanced WiFi' self-install tier — distinct from the already-seeded spectrum-sagemcom-rac2v1k cable modem. No browser/IP-based admin login is documented anywhere in the official user guide; the device label shows Serial Number, MAC Address, QR code, and 'Network Name and Password' only. Recovery & reset instructionsHold the recessed Reset button for 15+ seconds to restore factory default settings (this removes personalized configuration); reconfigure WiFi name/password via the My Spectrum App or Spectrum.net. |
No records match these filters. Try another model or clear the filters.
Related login addresses
GET CONNECTED
How to reach your router
- Connect your computer or phone to the router’s Wi-Fi or an Ethernet port.
- Open a documented login address. If it does not load, look for the Router or Default gateway address in your device’s network settings.
- Match your model and hardware revision to the table. Use the device label or your setup password when the model has no shared default.
Admin password or Wi-Fi password?
The admin password opens the router’s settings. The Wi-Fi password connects a device to the wireless network. They may be different, and an ISP or cloud account can be separate again.
If the password does not work
Check capitalization and the device label, then use the manufacturer’s password-recovery instructions. A factory reset erases settings and may require ISP setup details; follow the instructions for your exact model.
Find your model’s manual →Sources & data
Router default-credential data from ssid.ai (Drumworks Ventures FZ), licensed CC BY 4.0. Adapted, organized and supplemented by Manuals+. The data is provided as is; manufacturers and ISPs can change defaults.
Additional factual entries: Austin Songer’s credential list and Clint Milner’s credential list. Each table entry links to its supporting source. Updated 2026-10-16.